7.24. Tuning¶
7.24.1. Summary¶
There are some tuning parameters for handling a large database.
7.24.2. Parameters¶
This section describes tuning parameters.
7.24.2.1. The max number of open files per process¶
This parameter is for handling a large database.
Groonga creates one or more files per table and column. If your database has many tables and columns, Groonga process needs to open many files.
System limits the max number of open files per process. So you need to relax the limitation.
Here is an expression that compute how many files are opened by Groonga:
3 (for DB) +
N tables +
N columns (except index clumns) +
(N index columns * 2) +
X (the number of plugins etc.)
Here is an example schema:
table_create Entries TABLE_HASH_KEY ShortText
column_create Entries content COLUMN_SCALAR Text
column_create Entries n_likes COLUMN_SCALAR UInt32
table_create Terms TABLE_PAT_KEY ShortText --default_tokenizer TokenBigram --normalizer NormalizerAuto
column_create Terms entries_key_index COLUMN_INDEX|WITH_POSITION Entries _key
column_create Terms entries_content_index COLUMN_INDEX|WITH_POSITION Entries content
This example opens at least 11 files:
3 +
2 (Entries and Terms) +
2 (Entries.content and Entries.n_likes) +
4 (Terms.entries_key_index and Terms.entries_content_index) +
X = 11 + X
7.24.2.2. Memory usage¶
This parameter is for handling a large database.
Groonga maps database files onto memory and accesses to them. Groonga doesn’t maps unnecessary files onto memory. Groonga maps files when they are needed.
If you access to all data in database, all database files are mapped onto memory. If total size of your database files is 6GiB, your Groonga process uses 6GiB memory.
Normally, your all database files aren’t mapped onto memory. But it may be occurred. It is an example case that you dump your database.
Normally, you must have memory and swap that is larger than database. Linux has tuning parameter to work with less memory and swap than database size.
7.24.3. Linux¶
This section describes how to configure parameters on Linux.
7.24.3.1. nofile¶
You can relax the The max number of open files per process parameter by creating
a configuration file /etc/security/limits.d/groonga.conf that has
the following content:
${USER} soft nofile ${MAX_VALUE}
${USER} hard nofile ${MAX_VALUE}
If you run Groonga process by groonga user and your Groonga
process needs to open less than 10000 files, use the following
configuration:
groonga soft nofile 10000
groonga hard nofile 10000
The configuration is applied after your Groonga service is restarted
or re-login as your groonga user.
7.24.3.2. vm.overcommit_memory¶
This is Memory usage related parameter. You can handle a
database that is larger than your memory and swap by setting
vm.overcommit_memory kernel parameter to 1. 1 means that
Groonga can always map database files onto memory. Groonga recommends
the configuration.
See Linux kernel documentation about overcommit
about vm.overcommit_memory parameter details.
You can set the configuration by putting a configuration file
/etc/sysctl.d/groonga.conf that has the following content:
vm.overcommit_memory = 1
The configuration can be applied by restarting your system or run the following command:
% sudo sysctl --system
7.24.3.3. vm.max_map_count¶
This is Memory usage related parameter. You can handle a
16GiB or more larger size database by increasing vm.max_map_count
kernel parameter. The parameter limits the max number of memory maps.
The default value of the kernel parameter may be 65530 or
65536. Groonga maps 256KiB memory chunk at one time. If a
database is larger than 16GiB, Groonga reaches the
limitation. (256KiB * 65536 = 16GiB)
You needs to increase the value of the kernel parameter to handle
16GiB or more larger size database. For example, you can handle almost
32GiB size database by 65536 * 2 = 131072. You can set the
configuration by putting a configuration file
/etc/sysctl.d/groonga.conf that has the following content:
vm.max_map_count = 131072
Note that your real configuration file will be the following because
you already have vm.overcommit_memory configuration:
vm.overcommit_memory = 1
vm.max_map_count = 131072
The configuration can be applied by restarting your system or run the following command:
% sudo sysctl -p
7.24.4. FreeBSD¶
This section describes how to configure parameters on FreeBSD.
7.24.4.1. kern.maxfileperproc¶
TODO