GRASS logo

wxGUI GCP Manager for photo to image registration

Table of contents

DESCRIPTION

This module is based on g.gui.gcp, the GCP manager of GRASS GIS. It is part of i.ortho.photo suite.

The aim of this module is to give absolute location values to the fiducial points present (in number of 4 or 8) in a scanned aerial photo.

This is necessary as (manual) scanning introduces distortions, rotations and also may not be limited to scan the boundary of the photo itself. It is thus necessary to give to each fiducial the exact coordinates in mm as given by the aerial photographic instrument design, which is unique per camera.

This module requires you to have made a group with your aerial photo (i.group), a camera description file (i.ortho.target) and use them to launch the module. Additional requirements are the order of rectification (1 if no of Fiducials is 4, 2 if no of Fiducials is 8) and an extension file (if not given, defaults to \$filename_ip2i_out)

An example for Location imagery60:

g.gui.photo2image group=aerial@PERMANENT raster=gs13.1@PERMANENT camera=gscamera order=2 extension=try --o

Screenshot of g.gui.photo2image

Screenshot of g.gui.photo2image
Figure: Screenshot of g.gui.photo2image

For a detailed operation manual please read

wxGUI
wxGUI components

See also video tutorials on GRASS Wiki.

SEE ALSO

i.ortho.photo, i.group, i.ortho.camera, i.ortho.target, i.rectify, m.transform, v.rectify

AUTHORS

Markus Metz

Based on the Georectifier (GRASS 6.4.0) by Michael Barton
Martin Landa, Czech Technical University in Prague, Czech Republic

SOURCE CODE

Available at: wxGUI GCP Manager for photo to image registration source code (history)

Accessed: Sunday Jan 22 07:38:37 2023


Main index | GUI index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 8.2.1 Reference Manual