API to use D-Bus services as a client or to implement a D-Bus service. More...

Classes
class	Gio::DBus::AuthObserver
	AuthObserver - An object used for authenticating connections. More...

class	Gio::DBus::Connection
	A D-Bus Connection. More...

class	Gio::DBus::InterfaceVTable
	This represents a virtual table for handling properties and method calls for a D-Bus interface. More...

class	Gio::DBus::AnnotationInfo
	Stores information about an annotation. More...

class	Gio::DBus::ArgInfo
	ArgInfo - Stores information about an argument for a method or a signal. More...

class	Gio::DBus::MethodInfo
	Stores information about a method on an D-Bus interface. More...

class	Gio::DBus::SignalInfo
	Stores information about a signal on a D-Bus interface. More...

class	Gio::DBus::PropertyInfo
	Stores information about a property on a D-Bus interface. More...

class	Gio::DBus::InterfaceInfo
	Stores information about a D-Bus interface. More...

class	Gio::DBus::NodeInfo
	NodeInfo - Stores information about nodes in a remote object hierarchy. More...

class	Gio::DBus::Message
	A type for representing D-Bus messages that can be sent or received on a Connection. More...

class	Gio::DBus::MethodInvocation
	An Object for handling remote calls. More...

class	Gio::DBus::ObjectManager
	Base type for D-Bus object managers. More...

class	Gio::DBus::ObjectManagerClient
	Client-side object manager. More...

class	Gio::DBus::ObjectManagerServer
	Service-side object manager. More...

class	Gio::DBus::ObjectProxy
	Client-side D-Bus object. More...

class	Gio::DBus::ObjectSkeleton
	Service-side D-Bus object. More...

class	Gio::DBus::Proxy
	A client-side proxy. More...

class	Gio::DBus::Server
	This is a helper for listening to and accepting D-Bus connections. More...

class	Gio::DBus::SubtreeVTable
	This represents a virtual table for subtrees registered with Gio::DBus::Connection::register_subtree(). More...

Typedefs
using	Gio::DBus::SlotBusAcquired = sigc::slot< void, const Glib::RefPtr< Gio::DBus::Connection > &, Glib::ustring >
	For example, void on_bus_acquired(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);. More...

using	Gio::DBus::SlotNameAcquired = sigc::slot< void, const Glib::RefPtr< Gio::DBus::Connection > &, Glib::ustring >
	For example, void on_name_acquired(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);. More...

using	Gio::DBus::SlotNameLost = sigc::slot< void, const Glib::RefPtr< Gio::DBus::Connection > &, Glib::ustring >
	For example, void on_name_lost(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);. More...

using	Gio::DBus::SlotNameAppeared = sigc::slot< void, const Glib::RefPtr< Gio::DBus::Connection > &, Glib::ustring, const Glib::ustring & >
	For example, void on_name_appeared(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name, const Glib::ustring& name_owner);. More...

using	Gio::DBus::SlotNameVanished = sigc::slot< void, const Glib::RefPtr< Gio::DBus::Connection > &, Glib::ustring >
	For example, void on_name_vanished(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);. More...

Functions
bool	Gio::DBus::Address::is_address (const std::string &string)
	Checks if string is a D-Bus address. More...

bool	Gio::DBus::Address::is_supported (const std::string & address)
	Like is_address() but also checks if the library supports the transports in address and that key/value pairs for each transport are valid. More...

void	Gio::DBus::Address::get_stream (const std::string & address, const SlotAsyncReady slot, const Glib::RefPtr< Cancellable > & cancellable)
	Asynchronously connects to an endpoint specified by address and sets up the connection so it is in a state to run the client-side of the D-Bus authentication conversation. More...

Glib::RefPtr< IOStream >	Gio::DBus::Address::get_stream_finish (const Glib::RefPtr< AsyncResult > & res, std::string & out_guid)
	Finishes an operation started with get_stream(). More...

Glib::RefPtr< IOStream >	Gio::DBus::Address::get_stream_finish (const Glib::RefPtr< AsyncResult > & res)
	Finishes an operation started with get_stream(). More...

Glib::RefPtr< IOStream >	Gio::DBus::Address::get_stream_sync (const std::string & address, const Glib::RefPtr< Cancellable > & cancellable, std::string & out_guid)
	Synchronously connects to an endpoint specified by address and sets up the connection so it is in a state to run the client-side of the D-Bus authentication conversation. More...

Glib::RefPtr< IOStream >	Gio::DBus::Address::get_stream_sync (const std::string & address, const Glib::RefPtr< Cancellable > & cancellable)
	Synchronously connects to an endpoint specified by address and sets up the connection so it is in a state to run the client-side of the D-Bus authentication conversation. More...

std::string	Gio::DBus::Address::get_for_bus_sync (BusType bus_type, const Glib::RefPtr< Cancellable > & cancellable)
	Synchronously looks up the D-Bus address for the well-known message bus instance specified by bus_type. More...

bool	Gio::DBus::ErrorUtils::is_remote_error (const Glib::Error & error)
	Checks if error represents an error received via D-Bus from a remote peer. More...

Glib::ustring	Gio::DBus::ErrorUtils::get_remote_error (const Glib::Error & error)
	Gets the D-Bus error name used for error, if any. More...

bool	Gio::DBus::ErrorUtils::strip_remote_error (Glib::Error & error)
	Looks for extra information in the error message used to recover the D-Bus error name and strips it if found. More...

guint	Gio::DBus::own_name (BusType bus_type, const Glib::ustring & name, const SlotBusAcquired & bus_acquired_slot=SlotBusAcquired(), const SlotNameAcquired & name_acquired_slot=SlotNameAcquired(), const SlotNameLost & name_lost_slot=SlotNameLost(), BusNameOwnerFlags flags=Gio::DBus::BUS_NAME_OWNER_FLAGS_NONE)
	Starts acquiring name on the bus specified by bus_type and calls name_acquired_slot and name_lost_slot when the name is acquired respectively lost. More...

std::string	Gio::DBus::generate_guid ()
	Generate a D-Bus GUID that can be used with e.g. More...

bool	Gio::DBus::is_guid (const std::string &string)
	Checks if string is a D-Bus GUID. More...

bool	Gio::DBus::is_name (const Glib::ustring &string)
	Checks if string is a valid D-Bus bus name (either unique or well-known). More...

bool	Gio::DBus::is_unique_name (const Glib::ustring &string)
	Checks if string is a valid D-Bus unique bus name. More...

bool	Gio::DBus::is_member_name (const Glib::ustring &string)
	Checks if string is a valid D-Bus member (e.g. More...

bool	Gio::DBus::is_interface_name (const Glib::ustring &string)
	Checks if string is a valid D-Bus interface name. More...

guint	Gio::DBus::watch_name (BusType bus_type, const Glib::ustring & name, const SlotNameAppeared & name_appeared_slot=SlotNameAppeared(), const SlotNameVanished & name_vanished_slot=SlotNameVanished(), BusNameWatcherFlags flags=Gio::DBus::BUS_NAME_WATCHER_FLAGS_NONE)
	Starts watching name on the bus specified by bus_type and calls name_appeared_slot and name_vanished_slot when the name is known to have a owner respectively known to lose its owner. More...

guint	Gio::DBus::watch_name (const Glib::RefPtr< Connection > & connection, const Glib::ustring & name, const SlotNameAppeared & name_appeared_slot=SlotNameAppeared(), const SlotNameVanished & name_vanished_slot=SlotNameVanished(), BusNameWatcherFlags flags=Gio::DBus::BUS_NAME_WATCHER_FLAGS_NONE)
	A watch_name() function that takes a Connection instead of a BusType. More...

void	Gio::DBus::unwatch_name (guint watcher_id)
	Stops watching a name. More...

Detailed Description

API to use D-Bus services as a client or to implement a D-Bus service.

To write client code, see Gio::DBus::Proxy. To export objects on the bus for other clients, see Gio::DBus::own_name(), for instance.

Typedef Documentation

◆ SlotBusAcquired

using Gio::DBus::SlotBusAcquired = typedef sigc::slot<void, const Glib::RefPtr<Gio::DBus::Connection>&, Glib::ustring>

For example, void on_bus_acquired(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);.

Since glibmm 2.28:

◆ SlotNameAcquired

using Gio::DBus::SlotNameAcquired = typedef sigc::slot<void, const Glib::RefPtr<Gio::DBus::Connection>&, Glib::ustring>

For example, void on_name_acquired(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);.

◆ SlotNameAppeared

using Gio::DBus::SlotNameAppeared = typedef sigc::slot<void, const Glib::RefPtr<Gio::DBus::Connection>&, Glib::ustring, const Glib::ustring&>

For example, void on_name_appeared(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name, const Glib::ustring& name_owner);.

◆ SlotNameLost

using Gio::DBus::SlotNameLost = typedef sigc::slot<void, const Glib::RefPtr<Gio::DBus::Connection>&, Glib::ustring>

For example, void on_name_lost(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);.

◆ SlotNameVanished

using Gio::DBus::SlotNameVanished = typedef sigc::slot<void, const Glib::RefPtr<Gio::DBus::Connection>&, Glib::ustring>

For example, void on_name_vanished(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);.

Function Documentation

◆ generate_guid()

std::string Gio::DBus::generate_guid ( )

Generate a D-Bus GUID that can be used with e.g.

Gio::DBus::Connection::create().

See the D-Bus specification regarding what strings are valid D-Bus GUID (for example, D-Bus GUIDs are not RFC-4122 compliant).

Returns: A valid D-Bus GUID.

Since glibmm 2.28:

◆ get_for_bus_sync()

std::string Gio::DBus::Address::get_for_bus_sync	(	BusType	bus_type,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Synchronously looks up the D-Bus address for the well-known message bus instance specified by bus_type.

This may involve using various platform specific mechanisms.

Parameters

bus_type	A BusType.
cancellable	A Cancellable.

Returns: A valid D-Bus address string for bus_type.

Exceptions

Glib::Error.

Since glibmm 2.28:

◆ get_remote_error()

Glib::ustring Gio::DBus::ErrorUtils::get_remote_error ( const Glib::Error & error )

Gets the D-Bus error name used for error, if any.

This function is guaranteed to return a D-Bus error name for all Glib::Error instances returned from functions handling remote method calls (e.g. Gio::DBus::Connection::call_finish()) unless strip_remote_error() has been used on error.

Parameters

error A Glib::Error.

Returns: An allocated string or 0 if the D-Bus error name could not be found.

Since glibmm 2.28:

◆ get_stream()

void Gio::DBus::Address::get_stream	(	const std::string &	address,
		const SlotAsyncReady	slot,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Asynchronously connects to an endpoint specified by address and sets up the connection so it is in a state to run the client-side of the D-Bus authentication conversation.

When the operation is finished, slot will be invoked. You can then call get_stream_finish() to get the result of the operation.

This is an asynchronous failable function. See get_stream_sync() for the synchronous version.

Parameters

address	A valid D-Bus address.
cancellable	A Cancellable.
slot	A SlotAsyncReady to call when the request is satisfied.

Since glibmm 2.28:

◆ get_stream_finish() [1/2]

Glib::RefPtr< IOStream > Gio::DBus::Address::get_stream_finish ( const Glib::RefPtr< AsyncResult > & res )

Finishes an operation started with get_stream().

Parameters

res	A AsyncResult obtained from the SlotAsyncReady passed to get_stream().

Returns: A IOStream.

Exceptions

Glib::Error.

Since glibmm 2.28:

◆ get_stream_finish() [2/2]

Glib::RefPtr< IOStream > Gio::DBus::Address::get_stream_finish	(	const Glib::RefPtr< AsyncResult > &	res,
		std::string &	out_guid
	)

Finishes an operation started with get_stream().

Parameters

res	A AsyncResult obtained from the SlotAsyncReady passed to get_stream().
out_guid	Return location to store the GUID extracted from address, if any.

Returns: A IOStream.

Exceptions

Glib::Error.

Since glibmm 2.28:

◆ get_stream_sync() [1/2]

Glib::RefPtr< IOStream > Gio::DBus::Address::get_stream_sync	(	const std::string &	address,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Synchronously connects to an endpoint specified by address and sets up the connection so it is in a state to run the client-side of the D-Bus authentication conversation.

This is a synchronous failable function. See get_stream() for the asynchronous version.

Parameters

address	A valid D-Bus address.
cancellable	A Cancellable.

Returns: A IOStream.

Exceptions

Glib::Error.

Since glibmm 2.28:

◆ get_stream_sync() [2/2]

Glib::RefPtr< IOStream > Gio::DBus::Address::get_stream_sync	(	const std::string &	address,
		const Glib::RefPtr< Cancellable > &	cancellable,
		std::string &	out_guid
	)

Synchronously connects to an endpoint specified by address and sets up the connection so it is in a state to run the client-side of the D-Bus authentication conversation.

This is a synchronous failable function. See get_stream() for the asynchronous version.

Parameters

address	A valid D-Bus address.
cancellable	A Cancellable.
out_guid	A return location to store the GUID extracted from address, if any.

Returns: A IOStream.

Exceptions

Glib::Error.

Since glibmm 2.28:

◆ is_address()

bool Gio::DBus::Address::is_address ( const std::string & string )

Checks if string is a D-Bus address.

This doesn't check if string is actually supported by BusServer or BusConnection - use is_supported_address() to do more checks.

Parameters

string A string.

Returns: true if string is a valid D-Bus address, false otherwise.

Since glibmm 2.28:

◆ is_guid()

bool Gio::DBus::is_guid ( const std::string & string )

Checks if string is a D-Bus GUID.

See the D-Bus specification regarding what strings are valid D-Bus GUID (for example, D-Bus GUIDs are not RFC-4122 compliant).

Parameters

string The string to check.

Returns: true if string is a guid, false otherwise.

Since glibmm 2.28:

◆ is_interface_name()

bool Gio::DBus::is_interface_name ( const Glib::ustring & string )

Checks if string is a valid D-Bus interface name.

Parameters

string The string to check.

Returns: true if valid, false otherwise.

Since glibmm 2.28:

◆ is_member_name()

bool Gio::DBus::is_member_name ( const Glib::ustring & string )

Checks if string is a valid D-Bus member (e.g.

signal or method) name.

Parameters

string The string to check.

Returns: true if valid, false otherwise.

Since glibmm 2.28:

◆ is_name()

bool Gio::DBus::is_name ( const Glib::ustring & string )

Checks if string is a valid D-Bus bus name (either unique or well-known).

Parameters

string The string to check.

Returns: true if valid, false otherwise.

Since glibmm 2.28:

◆ is_remote_error()

bool Gio::DBus::ErrorUtils::is_remote_error ( const Glib::Error & error )

Checks if error represents an error received via D-Bus from a remote peer.

If so, use get_remote_error() to get the name of the error.

Parameters

error A Glib::Error.

Returns: true if error represents an error from a remote peer, false otherwise.

Since glibmm 2.28:

◆ is_supported()

bool Gio::DBus::Address::is_supported ( const std::string & address )

Like is_address() but also checks if the library supports the transports in address and that key/value pairs for each transport are valid.

Parameters

address A supposed address.

Returns: true if address is a valid D-Bus address that is supported by this library, false otherwise.

Exceptions

Glib::Error.

Since glibmm 2.28:

◆ is_unique_name()

bool Gio::DBus::is_unique_name ( const Glib::ustring & string )

Checks if string is a valid D-Bus unique bus name.

Parameters

string The string to check.

Returns: true if valid, false otherwise.

Since glibmm 2.28:

◆ own_name()

guint Gio::DBus::own_name	(	BusType	bus_type,
		const Glib::ustring &	name,
		const SlotBusAcquired &	bus_acquired_slot = `SlotBusAcquired()`,
		const SlotNameAcquired &	name_acquired_slot = `SlotNameAcquired()`,
		const SlotNameLost &	name_lost_slot = `SlotNameLost()`,
		BusNameOwnerFlags	flags = `Gio::DBus::BUS_NAME_OWNER_FLAGS_NONE`
	)

Starts acquiring name on the bus specified by bus_type and calls name_acquired_slot and name_lost_slot when the name is acquired respectively lost.

Slots will be invoked in the thread-default main loop of the thread you are calling this function from.

You are guaranteed that one of the name_acquired_slot and name_lost_slot slots will be invoked after calling this function - there are three possible cases:

name_lost_slot with a nullptr connection (if a connection to the bus can't be made).
bus_acquired_slot then name_lost_slot (if the name can't be obtained)
bus_acquired_slot then name_acquired_slot (if the name was obtained).

When you are done owning the name, just call unown_name() with the owner id this function returns.

If the name is acquired or lost (for example another application could acquire the name if you allow replacement or the application currently owning the name exits), the slots are also invoked. If the Connection that is used for attempting to own the name closes, then name_lost_slot is invoked since it is no longer possible for other processes to access the process.

You cannot use own_name() several times for the same name (unless interleaved with calls to unown_name()) - only the first call will work.

Another guarantee is that invocations of name_acquired_slot and name_lost_slot are guaranteed to alternate; that is, if name_acquired_slot is invoked then you are guaranteed that the next time one of the slots is invoked, it will be name_lost_slot. The reverse is also true.

If you plan on exporting objects (using e.g. Gio::DbusConnection::register_object()), note that it is generally too late to export the objects in name_acquired_slot. Instead, you can do this in bus_acquired_slot since you are guaranteed that this will run before name is requested from the bus.

This behavior makes it very simple to write applications that wants to own names and export objects.

Parameters

bus_type	The type of bus to own a name on.
name	The well-known name to own.
bus_acquired_slot	Slot to invoke when connected to the bus of type bus_type.
name_acquired_slot	Slot to invoke when name is acquired.
name_lost_slot	Slot to invoke when name is lost.
flags	A set of flags from the BusNameOwnerFlags enumeration.

Returns: An identifier (never 0) that an be used with unown_name() to stop owning the name.

Since glibmm 2.28:

◆ strip_remote_error()

bool Gio::DBus::ErrorUtils::strip_remote_error ( Glib::Error & error )

Looks for extra information in the error message used to recover the D-Bus error name and strips it if found.

If stripped, the message field in error will correspond exactly to what was received on the wire.

This is typically used when presenting errors to the end user.

Parameters

error A Glib::Error.

Returns: true if information was stripped, false otherwise.

Since glibmm 2.28:

◆ unwatch_name()

void Gio::DBus::unwatch_name ( guint watcher_id )

Stops watching a name.

Parameters

watcher_id An identifier obtained from watch_name().

◆ watch_name() [1/2]

guint Gio::DBus::watch_name	(	BusType	bus_type,
		const Glib::ustring &	name,
		const SlotNameAppeared &	name_appeared_slot = `SlotNameAppeared()`,
		const SlotNameVanished &	name_vanished_slot = `SlotNameVanished()`,
		BusNameWatcherFlags	flags = `Gio::DBus::BUS_NAME_WATCHER_FLAGS_NONE`
	)

Starts watching name on the bus specified by bus_type and calls name_appeared_slot and name_vanished_slot when the name is known to have a owner respectively known to lose its owner.

Callbacks will be invoked in the thread-default main loop of the thread you are calling this function from.

You are guaranteed that one of the slot will be invoked after calling this function. When you are done watching the name, just call unwatch_name() with the watcher id this function returns.

If the name vanishes or appears (for example the application owning the name could restart), the slot are also invoked. If the Connection that is used for watching the name disconnects, then name_vanished_slot is invoked since it is no longer possible to access the name.

Another guarantee is that invocations of name_appeared_slot and name_vanished_slot are guaranteed to alternate; that is, if name_appeared_slot is invoked then you are guaranteed that the next time one of the slot is invoked, it will be name_vanished_slot. The reverse is also true.

This behavior makes it very simple to write applications that wants to take action when a certain name exists, see the C API's Example 9, “Simple application watching a name” for more information. Basically, the application should create object proxies in name_appeared_slot and destroy them again (if any) in name_vanished_slot.

Parameters

bus_type	The type of bus to watch a name on.
name	The name (well-known or unique) to watch.
name_appeared_slot	Slot to invoke when name is known to exist.
name_vanished_slot	Slot to invoke when name is known to not exist.
flags	Flags from the BusNameWatcherFlags enumeration.

Returns: An identifier (never 0) that can be used with unwatch_name() to stop watching the name.

Since glibmm 2.28:

◆ watch_name() [2/2]

guint Gio::DBus::watch_name	(	const Glib::RefPtr< Connection > &	connection,
		const Glib::ustring &	name,
		const SlotNameAppeared &	name_appeared_slot = `SlotNameAppeared()`,
		const SlotNameVanished &	name_vanished_slot = `SlotNameVanished()`,
		BusNameWatcherFlags	flags = `Gio::DBus::BUS_NAME_WATCHER_FLAGS_NONE`
	)

A watch_name() function that takes a Connection instead of a BusType.

Parameters

connection	A Connection.
name	The name (well-known or unique) to watch.
name_appeared_slot	Slot to invoke when name is known to exist.
name_vanished_slot	Slot to invoke when name is known to not exist.
flags	Flags from the BusNameWatcherFlags enumeration.

Returns: An identifier (never 0) that can be used with unwatch_name() to stop watching the name.

Since glibmm 2.28:

Classes

Typedefs

Functions

Detailed Description

Typedef Documentation

◆ SlotBusAcquired

◆ SlotNameAcquired

◆ SlotNameAppeared

◆ SlotNameLost

◆ SlotNameVanished

Function Documentation

◆ generate_guid()

◆ get_for_bus_sync()

◆ get_remote_error()

◆ get_stream()

◆ get_stream_finish() [1/2]

◆ get_stream_finish() [2/2]

◆ get_stream_sync() [1/2]

◆ get_stream_sync() [2/2]

◆ is_address()

◆ is_guid()

◆ is_interface_name()

◆ is_member_name()

◆ is_name()

◆ is_remote_error()

◆ is_supported()

◆ is_unique_name()

◆ own_name()

◆ strip_remote_error()

◆ unwatch_name()

◆ watch_name() [1/2]

◆ watch_name() [2/2]