Low-level socket object. More...

#include <giomm/socket.h>

Inheritance diagram for Gio::Socket:

[legend]

Public Member Functions
	Socket (Socket && src) noexcept

Socket &	operator= (Socket && src) noexcept

	~Socket () noexcept override

GSocket *	gobj ()
	Provides access to the underlying C GObject. More...

const GSocket *	gobj () const
	Provides access to the underlying C GObject. More...

GSocket *	gobj_copy ()
	Provides access to the underlying C instance. The caller is responsible for unrefing it. Use when directly setting fields in structs. More...

void	bind (const Glib::RefPtr< SocketAddress > & address, bool allow_reuse)
	When a socket is created it is attached to an address family, but it doesn't have an address in this family. More...

void	listen ()
	Marks the socket as a server socket - a socket that is used to accept incoming requests using Socket::accept(). More...

Glib::RefPtr< Socket >	accept (const Glib::RefPtr< Cancellable > & cancellable)
	Accept incoming connections on a connection-based socket. More...

Glib::RefPtr< Socket >	accept ()
	A accept() convenience overload. More...

void	connect (const Glib::RefPtr< SocketAddress > & address, const Glib::RefPtr< Cancellable > & cancellable)
	Connect the socket to the specified remote address. More...

void	connect (const Glib::RefPtr< SocketAddress > & address)
	A connect() convenience overload. More...

void	check_connect_result ()
	Checks and resets the pending connect error for the socket. More...

gssize	receive (char * buffer, gsize size, const Glib::RefPtr< Cancellable > & cancellable)
	Receive data (up to size bytes) from a socket. More...

gssize	receive (char * buffer, gsize size)
	A receive() convenience overload. More...

gssize	receive_from (Glib::RefPtr< SocketAddress > & address, char * buffer, gsize size, const Glib::RefPtr< Cancellable > & cancellable)

gssize	receive_from (Glib::RefPtr< SocketAddress > & address, char * buffer, gsize size)

gssize	send (const gchar * buffer, gsize size, const Glib::RefPtr< Cancellable > & cancellable)
	Tries to send size bytes from buffer on the socket. More...

gssize	send (const gchar * buffer, gsize size)
	A send() convenience overload. More...

gssize	send_to (const Glib::RefPtr< SocketAddress > & address, const char * buffer, gsize size, const Glib::RefPtr< Cancellable > & cancellable)
	Tries to send size bytes from buffer to address. More...

gssize	send_to (const Glib::RefPtr< SocketAddress > & address, const char * buffer, gsize size)
	A send_to() convenience overload. More...

void	close ()
	Closes the socket, shutting down any active connection. More...

bool	is_closed ()
	Checks whether a socket is closed. More...

Glib::RefPtr< SocketSource >	create_source (Glib::IOCondition condition, const Glib::RefPtr< Cancellable > & cancellable=Glib::RefPtr< Cancellable >())
	Creates a SocketSource that can be attached to a Glib::MainContext to monitor for the availability of the specified condition on the socket. More...

void	shutdown (bool shutdown_read, bool shutdown_write)
	Shut down part or all of a full-duplex connection. More...

bool	is_connected ()
	Check whether the socket is connected. More...

gssize	get_available_bytes () const
	Get the amount of data pending in the OS input buffer, without blocking. More...

Glib::IOCondition	condition_check (Glib::IOCondition condition)
	Checks on the readiness of socket to perform operations. More...

void	condition_wait (Glib::IOCondition condition, const Glib::RefPtr< Cancellable > & cancellable)
	Waits for condition to become true on socket. More...

void	condition_wait (Glib::IOCondition condition)
	A condition_wait() convenience overload. More...

void	condition_timed_wait (Glib::IOCondition condition, gint64 timeout, const Glib::RefPtr< Cancellable > & cancellable)
	Waits for up to timeout microseconds for condition to become true on socket. More...

void	condition_timed_wait (Glib::IOCondition condition, gint64 timeout)
	A condition_timed_wait() convenience overload. More...

void	set_listen_backlog (int backlog)
	Sets the maximum number of outstanding connections allowed when listening on this socket. More...

int	get_listen_backlog () const
	Gets the listen backlog setting of the socket. More...

void	set_blocking (bool blocking)
	Sets the blocking mode of the socket. More...

bool	get_blocking () const
	Gets the blocking mode of the socket. More...

void	set_keepalive (bool keepalive)
	Sets or unsets the SO_KEEPALIVE flag on the underlying socket. More...

bool	get_keepalive () const
	Gets the keepalive mode of the socket. More...

SocketFamily	get_family () const
	Gets the socket family of the socket. More...

int	get_fd () const
	Returns the underlying OS socket object. More...

Glib::RefPtr< SocketAddress >	get_local_address () const
	Try to get the local address of a bound socket. More...

Glib::RefPtr< SocketAddress >	get_remote_address () const
	Try to get the remote address of a connected socket. More...

SocketProtocol	get_protocol () const
	Gets the socket protocol id the socket was created with. More...

SocketType	get_socket_type () const
	Gets the socket type of the socket. More...

bool	speaks_ipv4 () const
	Checks if a socket is capable of speaking IPv4. More...

Glib::RefPtr< Credentials >	get_credentials ()
	Returns the credentials of the foreign process connected to this socket, if any (e.g. it is only supported for SOCKET_FAMILY_UNIX sockets). More...

Glib::RefPtr< const Credentials >	get_credentials () const
	Returns the credentials of the foreign process connected to this socket, if any (e.g. it is only supported for SOCKET_FAMILY_UNIX sockets). More...

guint	get_timeout () const
	Gets the timeout setting of the socket. More...

void	set_timeout (guint timeout)
	Sets the time in seconds after which I/O operations on socket will time out if they have not yet completed. More...

gssize	receive_with_blocking (gchar * buffer, gsize size, bool blocking, const Glib::RefPtr< Cancellable > & cancellable=Glib::RefPtr< Cancellable >())
	This behaves exactly the same as g_socket_receive(), except that the choice of blocking or non-blocking behavior is determined by the blocking argument rather than by socket's properties. More...

gssize	send_with_blocking (gchar * buffer, gsize size, bool blocking, const Glib::RefPtr< Cancellable > & cancellable=Glib::RefPtr< Cancellable >())
	This behaves exactly the same as g_socket_send(), except that the choice of blocking or non-blocking behavior is determined by the blocking argument rather than by socket's properties. More...

bool	get_option (int level, int optname, int & value) const
	Gets the value of an integer-valued option on socket, as with getsockopt(). More...

bool	set_option (int level, int optname, int value)
	Sets the value of an integer-valued option on socket, as with setsockopt(). More...

guint	get_ttl () const
	Gets the unicast time-to-live setting on socket; see g_socket_set_ttl() for more details. More...

void	set_ttl (guint ttl)
	Sets the time-to-live for outgoing unicast packets on socket. More...

bool	get_broadcast () const
	Gets the broadcast setting on socket; if `true`, it is possible to send packets to broadcast addresses. More...

void	set_broadcast (bool broadcast)
	Sets whether socket should allow sending to broadcast addresses. More...

bool	get_multicast_loopback () const
	Gets the multicast loopback setting on socket; if `true` (the default), outgoing multicast packets will be looped back to multicast listeners on the same host. More...

void	set_multicast_loopback (bool loopback)
	Sets whether outgoing multicast packets will be received by sockets listening on that multicast address on the same host. More...

guint	get_multicast_ttl () const
	Gets the multicast time-to-live setting on socket; see g_socket_set_multicast_ttl() for more details. More...

void	set_multicast_ttl (guint ttl)
	Sets the time-to-live for outgoing multicast datagrams on socket. More...

bool	join_multicast_group (const Glib::RefPtr< InetAddress > & group, bool source_specific, const std::string & iface)
	Registers socket to receive multicast messages sent to group. More...

bool	join_multicast_group (const Glib::RefPtr< InetAddress > & group, bool source_specific)
	A join_multicast_group() convenience overload. More...

bool	leave_multicast_group (const Glib::RefPtr< InetAddress > & group, bool source_specific, const std::string & iface)
	Removes socket from the multicast group defined by group, iface, and source_specific (which must all have the same values they had when you joined the group). More...

bool	leave_multicast_group (const Glib::RefPtr< InetAddress > & group, bool source_specific)
	A leave_multicast_group() convenience overload. More...

Glib::PropertyProxy< bool >	property_blocking ()
	Whether or not I/O on this socket is blocking. More...

Glib::PropertyProxy_ReadOnly< bool >	property_blocking () const
	Whether or not I/O on this socket is blocking. More...

Glib::PropertyProxy_ReadOnly< SocketFamily >	property_family () const
	The sockets address family. More...

Glib::PropertyProxy_ReadOnly< int >	property_fd () const
	The sockets file descriptor. More...

Glib::PropertyProxy< bool >	property_keepalive ()
	Keep connection alive by sending periodic pings. More...

Glib::PropertyProxy_ReadOnly< bool >	property_keepalive () const
	Keep connection alive by sending periodic pings. More...

Glib::PropertyProxy< int >	property_listen_backlog ()
	Outstanding connections in the listen queue. More...

Glib::PropertyProxy_ReadOnly< int >	property_listen_backlog () const
	Outstanding connections in the listen queue. More...

Glib::PropertyProxy_ReadOnly< Glib::RefPtr< SocketAddress > >	property_local_address () const
	The local address the socket is bound to. More...

Glib::PropertyProxy_ReadOnly< Glib::RefPtr< SocketAddress > >	property_remote_address () const
	The remote address the socket is connected to. More...

Glib::PropertyProxy< guint >	property_timeout ()
	The timeout in seconds on socket I/O. More...

Glib::PropertyProxy_ReadOnly< guint >	property_timeout () const
	The timeout in seconds on socket I/O. More...

Glib::PropertyProxy_ReadOnly< SocketProtocol >	property_protocol () const
	The id of the protocol to use, or -1 for unknown. More...

Glib::PropertyProxy< bool >	property_broadcast ()
	Whether the socket should allow sending to broadcast addresses. More...

Glib::PropertyProxy_ReadOnly< bool >	property_broadcast () const
	Whether the socket should allow sending to broadcast addresses. More...

Glib::PropertyProxy_ReadOnly< SocketType >	property_type () const
	The sockets type. More...

Glib::PropertyProxy< guint >	property_ttl ()
	Time-to-live for outgoing unicast packets. More...

Glib::PropertyProxy_ReadOnly< guint >	property_ttl () const
	Time-to-live for outgoing unicast packets. More...

Glib::PropertyProxy< bool >	property_multicast_loopback ()
	Whether outgoing multicast packets loop back to the local host. More...

Glib::PropertyProxy_ReadOnly< bool >	property_multicast_loopback () const
	Whether outgoing multicast packets loop back to the local host. More...

Glib::PropertyProxy< guint >	property_multicast_ttl ()
	Time-to-live out outgoing multicast packets. More...

Glib::PropertyProxy_ReadOnly< guint >	property_multicast_ttl () const
	Time-to-live out outgoing multicast packets. More...

Public Member Functions inherited from Glib::Object
	Object (const Object &)=delete

Object &	operator= (const Object &)=delete

	Object (Object && src) noexcept

Object &	operator= (Object && src) noexcept

void *	get_data (const QueryQuark & key)

void	set_data (const Quark & key, void *data)

void	set_data (const Quark & key, void *data, DestroyNotify notify)

void	remove_data (const QueryQuark & quark)

void *	steal_data (const QueryQuark & quark)

Public Member Functions inherited from Glib::ObjectBase
	ObjectBase (const ObjectBase &)=delete

ObjectBase &	operator= (const ObjectBase &)=delete

void	set_property_value (const Glib::ustring & property_name, const Glib::ValueBase & value)
	You probably want to use a specific property_*() accessor method instead. More...

void	get_property_value (const Glib::ustring & property_name, Glib::ValueBase & value) const
	You probably want to use a specific property_*() accessor method instead. More...

template<class PropertyType >
void	set_property (const Glib::ustring & property_name, const PropertyType & value)
	You probably want to use a specific property_*() accessor method instead. More...

template<class PropertyType >
void	get_property (const Glib::ustring & property_name, PropertyType & value) const
	You probably want to use a specific property_*() accessor method instead. More...

void	connect_property_changed (const Glib::ustring & property_name, const sigc::slot< void > & slot)
	You can use the signal_changed() signal of the property proxy instead. More...

void	connect_property_changed (const Glib::ustring & property_name, sigc::slot< void > && slot)
	You can use the signal_changed() signal of the property proxy instead. More...

sigc::connection	connect_property_changed_with_return (const Glib::ustring & property_name, const sigc::slot< void > & slot)
	You can use the signal_changed() signal of the property proxy instead. More...

sigc::connection	connect_property_changed_with_return (const Glib::ustring & property_name, sigc::slot< void > && slot)
	You can use the signal_changed() signal of the property proxy instead. More...

void	freeze_notify ()
	Increases the freeze count on object. More...

void	thaw_notify ()
	Reverts the effect of a previous call to freeze_notify(). More...

virtual void	reference () const
	Increment the reference count for this object. More...

virtual void	unreference () const
	Decrement the reference count for this object. More...

GObject *	gobj ()
	Provides access to the underlying C GObject. More...

const GObject *	gobj () const
	Provides access to the underlying C GObject. More...

GObject *	gobj_copy () const
	Give a ref-ed copy to someone. Use for direct struct access. More...

Public Member Functions inherited from Gio::Initable
	Initable (Initable && src) noexcept

Initable &	operator= (Initable && src) noexcept

	~Initable () noexcept override

GInitable *	gobj ()
	Provides access to the underlying C GObject. More...

const GInitable *	gobj () const
	Provides access to the underlying C GObject. More...

Public Member Functions inherited from Glib::Interface
	Interface ()
	A Default constructor. More...

	Interface (Interface && src) noexcept

Interface &	operator= (Interface && src) noexcept

	Interface (const Glib::Interface_Class & interface_class)
	Called by constructors of derived classes. More...

	Interface (GObject * castitem)
	Called by constructors of derived classes. More...

	~Interface () noexcept override

	Interface (const Interface &)=delete

Interface &	operator= (const Interface &)=delete

GObject *	gobj ()

const GObject *	gobj () const

Static Public Member Functions
static GType	get_type ()
	Get the GType for this class, for use with the underlying GObject type system. More...

static Glib::RefPtr< Socket >	create (SocketFamily family, SocketType type, SocketProtocol protocol, const Glib::RefPtr< Cancellable > & cancellable=Glib::RefPtr< Cancellable >())
	Creates a new Socket with the defined family, type and protocol. More...

static Glib::RefPtr< Socket >	create_from_fd (int fd, const Glib::RefPtr< Cancellable > & cancellable=Glib::RefPtr< Cancellable >())
	Creates a new Socket from a native file descriptor or winsock SOCKET handle. More...

Static Public Member Functions inherited from Gio::Initable
static void	add_interface (GType gtype_implementer)

static GType	get_type ()
	Get the GType for this class, for use with the underlying GObject type system. More...

Protected Member Functions
	Socket (SocketFamily family, SocketType type, SocketProtocol protocol, const Glib::RefPtr< Cancellable > & cancellable)

	Socket (int fd, const Glib::RefPtr< Cancellable > & cancellable)

Protected Member Functions inherited from Glib::Object
	Object ()

	Object (const Glib::ConstructParams & construct_params)

	Object (GObject * castitem)

	~Object () noexcept override

Protected Member Functions inherited from Glib::ObjectBase
	ObjectBase ()
	This default constructor is called implicitly from the constructor of user-derived classes, even if, for instance, Gtk::Button calls a different ObjectBase constructor. More...

	ObjectBase (const char * custom_type_name)
	A derived constructor always overrides this choice. More...

	ObjectBase (const std::type_info & custom_type_info)
	This constructor is a special feature to allow creation of derived types on the fly, without having to use g_object_new() manually. More...

	ObjectBase (ObjectBase && src) noexcept

ObjectBase &	operator= (ObjectBase && src) noexcept

virtual	~ObjectBase () noexcept=0

void	initialize (GObject * castitem)

void	initialize_move (GObject * castitem, Glib::ObjectBase * previous_wrapper)

Protected Member Functions inherited from Gio::Initable
	Initable ()
	You should derive from this class to use it. More...

void	init (const Glib::RefPtr< Cancellable > & cancellable)
	Initializes the object implementing the interface. More...

void	init ()
	A init() convenience overload. More...

virtual bool	init_vfunc (const Glib::RefPtr< Cancellable > & cancellable, GError ** error)

Related Functions
(Note that these are not member functions.)
Glib::RefPtr< Gio::Socket >	wrap (GSocket * object, bool take_copy=false)
	A Glib::wrap() method for this object. More...

Related Functions inherited from Glib::Object
Glib::RefPtr< Glib::Object >	wrap (GObject * object, bool take_copy=false)

Related Functions inherited from Gio::Initable
Glib::RefPtr< Gio::Initable >	wrap (GInitable * object, bool take_copy=false)
	A Glib::wrap() method for this object. More...

Additional Inherited Members
Public Types inherited from Glib::Object
using	DestroyNotify = void(*)(gpointer data)

Detailed Description

Low-level socket object.

A Socket is a low-level networking primitive. It is a more or less direct mapping of the BSD socket API in a portable GObject based API. It supports both the UNIX socket implementations and winsock2 on Windows.

Socket is the platform independent base upon which the higher level network primitives are based. Applications are not typically meant to use it directly, but rather through classes like SocketClient, SocketService and SocketConnection. However there may be cases where direct use of Socket is useful.

Socket implements the Initable interface, and since initialization can fail, the constructor may throw an exception.

Sockets operate in two general modes, blocking or non-blocking. When in blocking mode all operations block until the requested operation is finished or there is an error. In non-blocking mode all calls that would block return immediately with a Gio::Error::WOULD_BLOCK error. To know when a call would successfully run you can call condition_check(), or condition_wait(). You can also use create_source() and attach it to a Glib::MainContext to get callbacks when I/O is possible. Note that all sockets are always set to non blocking mode in the system, and blocking mode is emulated in Socket.

When working in non-blocking mode applications should always be able to handle getting a Gio::Error::WOULD_BLOCK error even when some other function said that I/O was possible. This can easily happen in case of a race condition in the application, but it can also happen for other reasons. For instance, on Windows a socket is always seen as writable until a write returns Gio::Error::WOULD_BLOCK.

Sockets can be either connection oriented or datagram based. For connection oriented types you must first establish a connection by either connecting to an address or accepting a connection from another address. For connectionless socket types the target/source address is specified or received in each I/O operation.

All socket file descriptors are set to be close-on-exec.

Note that creating a Socket causes the signal SIGPIPE to be ignored for the remainder of the program. If you are writing a command-line utility that uses Socket, you may need to take into account the fact that your program will not automatically be killed if it tries to write to stdout after it has been closed.

Since glibmm 2.24:

Constructor & Destructor Documentation

◆ Socket() [1/3]

Gio::Socket::Socket ( Socket && src )

noexcept

◆ ~Socket()

Gio::Socket::~Socket ( )

overridenoexcept

◆ Socket() [2/3]

Gio::Socket::Socket	(	SocketFamily	family,
		SocketType	type,
		SocketProtocol	protocol,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

protected

◆ Socket() [3/3]

Gio::Socket::Socket	(	int	fd,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

protected

Member Function Documentation

◆ accept() [1/2]

Glib::RefPtr< Socket > Gio::Socket::accept ( )

A accept() convenience overload.

◆ accept() [2/2]

Glib::RefPtr< Socket > Gio::Socket::accept ( const Glib::RefPtr< Cancellable > & cancellable )

Accept incoming connections on a connection-based socket.

This removes the first outstanding connection request from the listening socket and creates a GSocket object for it.

The socket must be bound to a local address with g_socket_bind() and must be listening for incoming connections (Socket::listen()).

If there are no outstanding connections then the operation will block or throw Gio::Error with ERROR_WOULD_BLOCK if non-blocking I/O is enabled. To be notified of an incoming connection, wait for the Glib::IO_IN condition.

Parameters

cancellable A Cancellable object which can be used to cancel the operation.

Returns: a Gio::Socket

Exceptions

Gio::Error

◆ bind()

void Gio::Socket::bind	(	const Glib::RefPtr< SocketAddress > &	address,
		bool	allow_reuse
	)

When a socket is created it is attached to an address family, but it doesn't have an address in this family.

Socket::bind() assigns the address (sometimes called name) of the socket.

It is generally required to bind to a local address before you can receive connections. (See Socket::listen() and Socket::accept()). In certain situations, you may also want to bind a socket that will be used to initiate connections, though this is not normally required.

If socket is a TCP socket, then allow_reuse controls the setting of the SO_REUSEADDR socket option; normally it should be true for server sockets (sockets that you will eventually call Socket::accept() on), and false for client sockets. (Failing to set this flag on a server socket may cause Socket::bind() to throw Gio::Error with ADDRESS_IN_USE if the server program is stopped and then immediately restarted.)

If socket is a UDP socket, then allow_reuse determines whether or not other UDP sockets can be bound to the same address at the same time. In particular, you can have several UDP sockets bound to the same address, and they will all receive all of the multicast and broadcast packets sent to that address. (The behavior of unicast UDP packets to an address with multiple listeners is not defined.)

Parameters

address	a SocketAddress specifying the local address.
allow_reuse	whether to allow reusing this address

Exceptions

Gio::Error

◆ check_connect_result()

void Gio::Socket::check_connect_result ( )

Checks and resets the pending connect error for the socket.

This is used to check for errors when g_socket_connect() is used in non-blocking mode.

Since glibmm 2.22:

Exceptions

Glib::Error

◆ close()

void Gio::Socket::close ( )

Closes the socket, shutting down any active connection.

Closing a socket does not wait for all outstanding I/O operations to finish, so the caller should not rely on them to be guaranteed to complete even if the close returns with no error.

Once the socket is closed, all other operations will return IO_ERROR_CLOSED. Closing a socket multiple times will not return an error.

Sockets will be automatically closed when the last reference is dropped, but you might want to call this function to make sure resources are released as early as possible.

Beware that due to the way that TCP works, it is possible for recently-sent data to be lost if either you close a socket while the IO_IN condition is set, or else if the remote connection tries to send something to you after you close the socket but before it has finished reading all of the data you sent. There is no easy generic way to avoid this problem; the easiest fix is to design the network protocol such that the client will never send data "out of turn". Another solution is for the server to half-close the connection by calling g_socket_shutdown() with only the shutdown_write flag set, and then wait for the client to notice this and close its side of the connection, after which the server can safely call g_socket_close(). (This is what TcpConnection does if you call g_tcp_connection_set_graceful_disconnect(). But of course, this only works if the client will close its connection after the server does.)

Since glibmm 2.22:

Exceptions

Glib::Error

◆ condition_check()

Glib::IOCondition Gio::Socket::condition_check ( Glib::IOCondition condition )

Checks on the readiness of socket to perform operations.

The operations specified in condition are checked for and masked against the currently-satisfied conditions on socket. The result is returned.

Note that on Windows, it is possible for an operation to return IO_ERROR_WOULD_BLOCK even immediately after g_socket_condition_check() has claimed that the socket is ready for writing. Rather than calling g_socket_condition_check() and then writing to the socket if it succeeds, it is generally better to simply try writing to the socket right away, and try again later if the initial attempt returns IO_ERROR_WOULD_BLOCK.

It is meaningless to specify IO_ERR or IO_HUP in condition; these conditions will always be set in the output if they are true.

This call never blocks.

Since glibmm 2.22:

Parameters

condition A IOCondition mask to check.

Returns: The GIOCondition mask of the current state.

◆ condition_timed_wait() [1/2]

void Gio::Socket::condition_timed_wait	(	Glib::IOCondition	condition,
		gint64	timeout
	)

A condition_timed_wait() convenience overload.

◆ condition_timed_wait() [2/2]

void Gio::Socket::condition_timed_wait	(	Glib::IOCondition	condition,
		gint64	timeout,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Waits for up to timeout microseconds for condition to become true on socket.

If the condition is met, true is returned.

If cancellable is cancelled before the condition is met, or if timeout (or the socket's Socket::property_timeout()) is reached before the condition is met, then false is returned and error, if non-nullptr, is set to the appropriate value (IO_ERROR_CANCELLED or IO_ERROR_TIMED_OUT).

If you don't want a timeout, use g_socket_condition_wait(). (Alternatively, you can pass -1 for timeout.)

Note that although timeout is in microseconds for consistency with other GLib APIs, this function actually only has millisecond resolution, and the behavior is undefined if timeout is not an exact number of milliseconds.

Since glibmm 2.32:

Parameters

condition	A IOCondition mask to wait for.
timeout	The maximum time (in microseconds) to wait, or -1.
cancellable	A Cancellable, or `nullptr`.

Exceptions

Glib::Error

◆ condition_wait() [1/2]

void Gio::Socket::condition_wait ( Glib::IOCondition condition )

A condition_wait() convenience overload.

◆ condition_wait() [2/2]

void Gio::Socket::condition_wait	(	Glib::IOCondition	condition,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Waits for condition to become true on socket.

When the condition is met, true is returned.

If cancellable is cancelled before the condition is met, or if the socket has a timeout set and it is reached before the condition is met, then false is returned and error, if non-nullptr, is set to the appropriate value (IO_ERROR_CANCELLED or IO_ERROR_TIMED_OUT).

See also g_socket_condition_timed_wait().

Since glibmm 2.22:

Parameters

condition	A IOCondition mask to wait for.
cancellable	A Cancellable, or `nullptr`.

Exceptions

Glib::Error

◆ connect() [1/2]

void Gio::Socket::connect ( const Glib::RefPtr< SocketAddress > & address )

A connect() convenience overload.

◆ connect() [2/2]

void Gio::Socket::connect	(	const Glib::RefPtr< SocketAddress > &	address,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Connect the socket to the specified remote address.

For connection oriented socket this generally means we attempt to make a connection to the address . For a connection-less socket it sets the default address for Socket::send() and discards all incoming datagrams from other sources.

Generally connection oriented sockets can only connect once, but connection-less sockets can connect multiple times to change the default address.

If the connect call needs to do network I/O it will block, unless non-blocking I/O is enabled. Then Gio::Error with ERROR_PENDING is thrown and the user can be notified of the connection finishing by waiting for the Glib::IO_OUT condition. The result of the connection must then be checked with Socket::check_connect_result().

Parameters

address	a SocketAddress specifying the remote address.
cancellable	A Cancellable object which can be used to cancel the operation.

Exceptions

Gio::Error

◆ create()

static Glib::RefPtr< Socket > Gio::Socket::create	(	SocketFamily	family,
		SocketType	type,
		SocketProtocol	protocol,
		const Glib::RefPtr< Cancellable > &	cancellable = `Glib::RefPtr< Cancellable >()`
	)

static

Creates a new Socket with the defined family, type and protocol.

If protocol is 0 (SOCKET_PROTOCOL_DEFAULT) the default protocol type for the family and type is used.

The protocol is a family and type specific int that specifies what kind of protocol to use. SocketProtocol lists several common ones. Many families only support one protocol, and use 0 for this, others support several and using 0 means to use the default protocol for the family and type.

The protocol id is passed directly to the operating system, so you can use protocols not listed in SocketProtocol if you know the protocol number used for it.

Since glibmm 2.22:

Parameters

family	The socket family to use, e.g. SOCKET_FAMILY_IPV4.
type	The socket type to use.
protocol	The id of the protocol to use, or 0 for default.

Returns: A Socket or nullptr on error. Free the returned object with Glib::object_unref().

Parameters

cancellable A Cancellable object which can be used to cancel the operation.

Exceptions

Glib::Error

◆ create_from_fd()

static Glib::RefPtr< Socket > Gio::Socket::create_from_fd	(	int	fd,
		const Glib::RefPtr< Cancellable > &	cancellable = `Glib::RefPtr< Cancellable >()`
	)

static

Creates a new Socket from a native file descriptor or winsock SOCKET handle.

This reads all the settings from the file descriptor so that all properties should work. Note that the file descriptor will be set to non-blocking mode, independent on the blocking mode of the Socket.

On success, the returned Socket takes ownership of fd. On failure, the caller must close fd themselves.

Since GLib 2.46, it is no longer a fatal error to call this on a non-socket descriptor. Instead, a GError will be set with code IO_ERROR_FAILED

Since glibmm 2.22:

Parameters

fd	A native socket file descriptor.

Returns: A Socket or nullptr on error. Free the returned object with Glib::object_unref().

Parameters

cancellable A Cancellable object which can be used to cancel the operation.

Exceptions

Glib::Error

◆ create_source()

Glib::RefPtr< SocketSource > Gio::Socket::create_source	(	Glib::IOCondition	condition,
		const Glib::RefPtr< Cancellable > &	cancellable = `Glib::RefPtr< Cancellable >()`
	)

Creates a SocketSource that can be attached to a Glib::MainContext to monitor for the availability of the specified condition on the socket.

Create a slot from a function to be called when condition is met for the socket with sigc::ptr_fun() or sigc::mem_fun() and pass it into the connect() function of the returned SocketSource object. Polling of the socket will start when you attach a Glib::MainContext object to the returned SocketSource object using its attach() function.

It is meaningless to specify Glib::IO_ERR or Glib::IO_HUP in condition; these conditions will always be reported output if they are true.

cancellable can be used to cancel the source, which will cause the source to trigger, reporting the current condition (which is likely 0 unless cancellation happened at the same time as a condition change). You can check for this in the callback using Cancellable::is_cancelled().

If the socket has a timeout set, and it is reached before condition occurs, the source will then trigger anyway, reporting Glib::IO_IN or Glib::IO_OUT depending on condition. However, the socket will have been marked as having had a timeout, and so the next Socket I/O method you call will then fail with a Gio::IO_ERROR_TIMED_OUT.

Gio::signal_socket().connect() is a simpler interface to the same functionality.

Since glibmm 2.42:

Parameters

condition	A Glib::IOCondition mask to monitor.
cancellable	A Cancellable. The default value means the source is not cancellable.

Returns: A newly allocated SocketSource.

◆ get_available_bytes()

gssize Gio::Socket::get_available_bytes ( ) const

Get the amount of data pending in the OS input buffer, without blocking.

If socket is a UDP or SCTP socket, this will return the size of just the next packet, even if additional packets are buffered after that one.

Note that on Windows, this function is rather inefficient in the UDP case, and so if you know any plausible upper bound on the size of the incoming packet, it is better to just do a g_socket_receive() with a buffer of that size, rather than calling g_socket_get_available_bytes() first and then doing a receive of exactly the right size.

Since glibmm 2.32:

Returns: The number of bytes that can be read from the socket without blocking or truncating, or -1 on error.

◆ get_blocking()

bool Gio::Socket::get_blocking ( ) const

Gets the blocking mode of the socket.

For details on blocking I/O, see g_socket_set_blocking().

Since glibmm 2.22:

Returns: true if blocking I/O is used, false otherwise.

◆ get_broadcast()

bool Gio::Socket::get_broadcast ( ) const

Gets the broadcast setting on socket; if true, it is possible to send packets to broadcast addresses.

Since glibmm 2.32:

Returns: The broadcast setting on socket.

◆ get_credentials() [1/2]

Glib::RefPtr< Credentials > Gio::Socket::get_credentials ( )

Returns the credentials of the foreign process connected to this socket, if any (e.g. it is only supported for SOCKET_FAMILY_UNIX sockets).

If this operation isn't supported on the OS, the method fails with the IO_ERROR_NOT_SUPPORTED error. On Linux this is implemented by reading the SO_PEERCRED option on the underlying socket.

This method can be expected to be available on the following platforms:

Linux since GLib 2.26
OpenBSD since GLib 2.30
Solaris, Illumos and OpenSolaris since GLib 2.40
NetBSD since GLib 2.42
macOS, tvOS, iOS since GLib 2.66

Other ways to obtain credentials from a foreign peer includes the UnixCredentialsMessage type and g_unix_connection_send_credentials() / g_unix_connection_receive_credentials() functions.

Since glibmm 2.26:

Returns: nullptr if error is set, otherwise a Credentials object that must be freed with Glib::object_unref().

Exceptions

Glib::Error

◆ get_credentials() [2/2]

Glib::RefPtr< const Credentials > Gio::Socket::get_credentials ( ) const

Returns the credentials of the foreign process connected to this socket, if any (e.g. it is only supported for SOCKET_FAMILY_UNIX sockets).

If this operation isn't supported on the OS, the method fails with the IO_ERROR_NOT_SUPPORTED error. On Linux this is implemented by reading the SO_PEERCRED option on the underlying socket.

This method can be expected to be available on the following platforms:

Linux since GLib 2.26
OpenBSD since GLib 2.30
Solaris, Illumos and OpenSolaris since GLib 2.40
NetBSD since GLib 2.42
macOS, tvOS, iOS since GLib 2.66

Other ways to obtain credentials from a foreign peer includes the UnixCredentialsMessage type and g_unix_connection_send_credentials() / g_unix_connection_receive_credentials() functions.

Since glibmm 2.26:

Returns: nullptr if error is set, otherwise a Credentials object that must be freed with Glib::object_unref().

Exceptions

Glib::Error

◆ get_family()

SocketFamily Gio::Socket::get_family ( ) const

Gets the socket family of the socket.

Since glibmm 2.22:

Returns: A SocketFamily.

◆ get_fd()

int Gio::Socket::get_fd ( ) const

Returns the underlying OS socket object.

On unix this is a socket file descriptor, and on Windows this is a Winsock2 SOCKET handle. This may be useful for doing platform specific or otherwise unusual operations on the socket.

Since glibmm 2.22:

Returns: The file descriptor of the socket.

◆ get_keepalive()

bool Gio::Socket::get_keepalive ( ) const

Gets the keepalive mode of the socket.

For details on this, see g_socket_set_keepalive().

Since glibmm 2.22:

Returns: true if keepalive is active, false otherwise.

◆ get_listen_backlog()

int Gio::Socket::get_listen_backlog ( ) const

Gets the listen backlog setting of the socket.

For details on this, see g_socket_set_listen_backlog().

Since glibmm 2.22:

Returns: The maximum number of pending connections.

◆ get_local_address()

Glib::RefPtr< SocketAddress > Gio::Socket::get_local_address ( ) const

Try to get the local address of a bound socket.

This is only useful if the socket has been bound to a local address, either explicitly or implicitly when connecting.

Since glibmm 2.22:

Returns: A SocketAddress or nullptr on error. Free the returned object with Glib::object_unref().

Exceptions

Glib::Error

◆ get_multicast_loopback()

bool Gio::Socket::get_multicast_loopback ( ) const

Gets the multicast loopback setting on socket; if true (the default), outgoing multicast packets will be looped back to multicast listeners on the same host.

Since glibmm 2.32:

Returns: The multicast loopback setting on socket.

◆ get_multicast_ttl()

guint Gio::Socket::get_multicast_ttl ( ) const

Gets the multicast time-to-live setting on socket; see g_socket_set_multicast_ttl() for more details.

Since glibmm 2.32:

Returns: The multicast time-to-live setting on socket.

◆ get_option()

bool Gio::Socket::get_option	(	int	level,
		int	optname,
		int &	value
	)		const

Gets the value of an integer-valued option on socket, as with getsockopt().

(If you need to fetch a non-integer-valued option, you will need to call getsockopt() directly.)

The [<gio/gnetworking.h>][gio-gnetworking.h] header pulls in system headers that will define most of the standard/portable socket options. For unusual socket protocols or platform-dependent options, you may need to include additional headers.

Note that even for socket options that are a single byte in size, value is still a pointer to a int variable, not a #guchar; g_socket_get_option() will handle the conversion internally.

Since glibmm 2.36:

Parameters

level	The "API level" of the option (eg, `SOL_SOCKET`).
optname	The "name" of the option (eg, `SO_BROADCAST`).
value	Return location for the option value.

Returns: Success or failure. On failure, error will be set, and the system error value (errno or WSAGetLastError()) will still be set to the result of the getsockopt() call.

Exceptions

Glib::Error

◆ get_protocol()

SocketProtocol Gio::Socket::get_protocol ( ) const

Gets the socket protocol id the socket was created with.

In case the protocol is unknown, -1 is returned.

Since glibmm 2.22:

Returns: A protocol id, or -1 if unknown.

◆ get_remote_address()

Glib::RefPtr< SocketAddress > Gio::Socket::get_remote_address ( ) const

Try to get the remote address of a connected socket.

This is only useful for connection oriented sockets that have been connected.

Since glibmm 2.22:

Returns: A SocketAddress or nullptr on error. Free the returned object with Glib::object_unref().

Exceptions

Glib::Error

◆ get_socket_type()

SocketType Gio::Socket::get_socket_type ( ) const

Gets the socket type of the socket.

Since glibmm 2.22:

Returns: A SocketType.

◆ get_timeout()

guint Gio::Socket::get_timeout ( ) const

Gets the timeout setting of the socket.

For details on this, see g_socket_set_timeout().

Since glibmm 2.26:

Returns: The timeout in seconds.

◆ get_ttl()

guint Gio::Socket::get_ttl ( ) const

Gets the unicast time-to-live setting on socket; see g_socket_set_ttl() for more details.

Since glibmm 2.32:

Returns: The time-to-live setting on socket.

◆ get_type()

static GType Gio::Socket::get_type ( )

static

Get the GType for this class, for use with the underlying GObject type system.

◆ gobj() [1/2]

GSocket * Gio::Socket::gobj ( )

inline

Provides access to the underlying C GObject.

◆ gobj() [2/2]

const GSocket * Gio::Socket::gobj ( ) const

inline

Provides access to the underlying C GObject.

◆ gobj_copy()

GSocket * Gio::Socket::gobj_copy ( )

Provides access to the underlying C instance. The caller is responsible for unrefing it. Use when directly setting fields in structs.

◆ is_closed()

bool Gio::Socket::is_closed ( )

Checks whether a socket is closed.

Since glibmm 2.22:

Returns: true if socket is closed, false otherwise.

◆ is_connected()

bool Gio::Socket::is_connected ( )

Check whether the socket is connected.

This is only useful for connection-oriented sockets.

If using g_socket_shutdown(), this function will return true until the socket has been shut down for reading and writing. If you do a non-blocking connect, this function will not return true until after you call g_socket_check_connect_result().

Since glibmm 2.22:

Returns: true if socket is connected, false otherwise.

◆ join_multicast_group() [1/2]

bool Gio::Socket::join_multicast_group	(	const Glib::RefPtr< InetAddress > &	group,
		bool	source_specific
	)

A join_multicast_group() convenience overload.

◆ join_multicast_group() [2/2]

bool Gio::Socket::join_multicast_group	(	const Glib::RefPtr< InetAddress > &	group,
		bool	source_specific,
		const std::string &	iface
	)

Registers socket to receive multicast messages sent to group.

socket must be a SOCKET_TYPE_DATAGRAM socket, and must have been bound to an appropriate interface and port with g_socket_bind().

If iface is nullptr, the system will automatically pick an interface to bind to based on group.

If source_specific is true, source-specific multicast as defined in RFC 4604 is used. Note that on older platforms this may fail with a IO_ERROR_NOT_SUPPORTED error.

To bind to a given source-specific multicast address, use g_socket_join_multicast_group_ssm() instead.

Since glibmm 2.32:

Parameters

group	A InetAddress specifying the group address to join.
iface	Name of the interface to use, or `nullptr`.
source_specific	`true` if source-specific multicast should be used.

Returns: true on success, false on error.

Exceptions

Glib::Error

◆ leave_multicast_group() [1/2]

bool Gio::Socket::leave_multicast_group	(	const Glib::RefPtr< InetAddress > &	group,
		bool	source_specific
	)

A leave_multicast_group() convenience overload.

◆ leave_multicast_group() [2/2]

bool Gio::Socket::leave_multicast_group	(	const Glib::RefPtr< InetAddress > &	group,
		bool	source_specific,
		const std::string &	iface
	)

Removes socket from the multicast group defined by group, iface, and source_specific (which must all have the same values they had when you joined the group).

socket remains bound to its address and port, and can still receive unicast messages after calling this.

To unbind to a given source-specific multicast address, use g_socket_leave_multicast_group_ssm() instead.

Since glibmm 2.32:

Parameters

group	A InetAddress specifying the group address to leave.
iface	Interface used.
source_specific	`true` if source-specific multicast was used.

Returns: true on success, false on error.

Exceptions

Glib::Error

◆ listen()

void Gio::Socket::listen ( )

Marks the socket as a server socket - a socket that is used to accept incoming requests using Socket::accept().

Before calling this the socket must be bound to a local address using Socket::bind().

To set the maximum amount of outstanding clients, use Socket::set_listen_backlog().

Exceptions

Gio::Error

◆ operator=()

Socket & Gio::Socket::operator= ( Socket && src )

noexcept

◆ property_blocking() [1/2]

Glib::PropertyProxy< bool > Gio::Socket::property_blocking ( )

Whether or not I/O on this socket is blocking.

Default value: true

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_blocking() [2/2]

Glib::PropertyProxy_ReadOnly< bool > Gio::Socket::property_blocking ( ) const

Whether or not I/O on this socket is blocking.

Default value: true

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_broadcast() [1/2]

Glib::PropertyProxy< bool > Gio::Socket::property_broadcast ( )

Whether the socket should allow sending to broadcast addresses.

Since glibmm 2.32:

Default value: false

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_broadcast() [2/2]

Glib::PropertyProxy_ReadOnly< bool > Gio::Socket::property_broadcast ( ) const

Whether the socket should allow sending to broadcast addresses.

Since glibmm 2.32:

Default value: false

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_family()

Glib::PropertyProxy_ReadOnly< SocketFamily > Gio::Socket::property_family ( ) const

The sockets address family.

Default value: SOCKET_FAMILY_INVALID

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_fd()

Glib::PropertyProxy_ReadOnly< int > Gio::Socket::property_fd ( ) const

The sockets file descriptor.

Default value: -1

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_keepalive() [1/2]

Glib::PropertyProxy< bool > Gio::Socket::property_keepalive ( )

Keep connection alive by sending periodic pings.

Default value: false

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_keepalive() [2/2]

Glib::PropertyProxy_ReadOnly< bool > Gio::Socket::property_keepalive ( ) const

Keep connection alive by sending periodic pings.

Default value: false

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_listen_backlog() [1/2]

Glib::PropertyProxy< int > Gio::Socket::property_listen_backlog ( )

Outstanding connections in the listen queue.

Default value: 10

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_listen_backlog() [2/2]

Glib::PropertyProxy_ReadOnly< int > Gio::Socket::property_listen_backlog ( ) const

Outstanding connections in the listen queue.

Default value: 10

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_local_address()

Glib::PropertyProxy_ReadOnly< Glib::RefPtr< SocketAddress > > Gio::Socket::property_local_address ( ) const

The local address the socket is bound to.

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_multicast_loopback() [1/2]

Glib::PropertyProxy< bool > Gio::Socket::property_multicast_loopback ( )

Whether outgoing multicast packets loop back to the local host.

Since glibmm 2.32:

Default value: true

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_multicast_loopback() [2/2]

Glib::PropertyProxy_ReadOnly< bool > Gio::Socket::property_multicast_loopback ( ) const

Whether outgoing multicast packets loop back to the local host.

Since glibmm 2.32:

Default value: true

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_multicast_ttl() [1/2]

Glib::PropertyProxy< guint > Gio::Socket::property_multicast_ttl ( )

Time-to-live out outgoing multicast packets.

Since glibmm 2.32:

Default value: 1

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_multicast_ttl() [2/2]

Glib::PropertyProxy_ReadOnly< guint > Gio::Socket::property_multicast_ttl ( ) const

Time-to-live out outgoing multicast packets.

Since glibmm 2.32:

Default value: 1

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_protocol()

Glib::PropertyProxy_ReadOnly< SocketProtocol > Gio::Socket::property_protocol ( ) const

The id of the protocol to use, or -1 for unknown.

Default value: SOCKET_PROTOCOL_UNKNOWN

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_remote_address()

Glib::PropertyProxy_ReadOnly< Glib::RefPtr< SocketAddress > > Gio::Socket::property_remote_address ( ) const

The remote address the socket is connected to.

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_timeout() [1/2]

Glib::PropertyProxy< guint > Gio::Socket::property_timeout ( )

The timeout in seconds on socket I/O.

Since glibmm 2.26:

Default value: 0

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_timeout() [2/2]

Glib::PropertyProxy_ReadOnly< guint > Gio::Socket::property_timeout ( ) const

The timeout in seconds on socket I/O.

Since glibmm 2.26:

Default value: 0

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_ttl() [1/2]

Glib::PropertyProxy< guint > Gio::Socket::property_ttl ( )

Time-to-live for outgoing unicast packets.

Since glibmm 2.32:

Default value: 0

Returns: A PropertyProxy that allows you to get or set the value of the property, or receive notification when the value of the property changes.

◆ property_ttl() [2/2]

Glib::PropertyProxy_ReadOnly< guint > Gio::Socket::property_ttl ( ) const

Time-to-live for outgoing unicast packets.

Since glibmm 2.32:

Default value: 0

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ property_type()

Glib::PropertyProxy_ReadOnly< SocketType > Gio::Socket::property_type ( ) const

The sockets type.

Default value: SOCKET_TYPE_STREAM

Returns: A PropertyProxy_ReadOnly that allows you to get the value of the property, or receive notification when the value of the property changes.

◆ receive() [1/2]

gssize Gio::Socket::receive	(	char *	buffer,
		gsize	size
	)

A receive() convenience overload.

◆ receive() [2/2]

gssize Gio::Socket::receive	(	char *	buffer,
		gsize	size,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Receive data (up to size bytes) from a socket.

This is mainly used by connection-oriented sockets; it is identical to g_socket_receive_from() with address set to nullptr.

For SOCKET_TYPE_DATAGRAM and SOCKET_TYPE_SEQPACKET sockets, g_socket_receive() will always read either 0 or 1 complete messages from the socket. If the received message is too large to fit in buffer, then the data beyond size bytes will be discarded, without any explicit indication that this has occurred.

For SOCKET_TYPE_STREAM sockets, g_socket_receive() can return any number of bytes, up to size. If more than size bytes have been received, the additional data will be returned in future calls to g_socket_receive().

If the socket is in blocking mode the call will block until there is some data to receive, the connection is closed, or there is an error. If there is no data available and the socket is in non-blocking mode, a IO_ERROR_WOULD_BLOCK error will be returned. To be notified when data is available, wait for the IO_IN condition.

On error -1 is returned and error is set accordingly.

Since glibmm 2.22:

Parameters

buffer	A buffer to read data into (which should be at least size bytes long).
size	The number of bytes you want to read from the socket.
cancellable	A Cancellable or `nullptr`.

Returns: Number of bytes read, or 0 if the connection was closed by the peer, or -1 on error.

Exceptions

Glib::Error

◆ receive_from() [1/2]

gssize Gio::Socket::receive_from	(	Glib::RefPtr< SocketAddress > &	address,
		char *	buffer,
		gsize	size
	)

◆ receive_from() [2/2]

gssize Gio::Socket::receive_from	(	Glib::RefPtr< SocketAddress > &	address,
		char *	buffer,
		gsize	size,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

◆ receive_with_blocking()

gssize Gio::Socket::receive_with_blocking	(	gchar *	buffer,
		gsize	size,
		bool	blocking,
		const Glib::RefPtr< Cancellable > &	cancellable = `Glib::RefPtr< Cancellable >()`
	)

This behaves exactly the same as g_socket_receive(), except that the choice of blocking or non-blocking behavior is determined by the blocking argument rather than by socket's properties.

Since glibmm 2.26:

Parameters

buffer	A buffer to read data into (which should be at least size bytes long).
size	The number of bytes you want to read from the socket.
blocking	Whether to do blocking or non-blocking I/O.
cancellable	A Cancellable or `nullptr`.

Returns: Number of bytes read, or 0 if the connection was closed by the peer, or -1 on error.

◆ send() [1/2]

gssize Gio::Socket::send	(	const gchar *	buffer,
		gsize	size
	)

A send() convenience overload.

◆ send() [2/2]

gssize Gio::Socket::send	(	const gchar *	buffer,
		gsize	size,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Tries to send size bytes from buffer on the socket.

This is mainly used by connection-oriented sockets; it is identical to g_socket_send_to() with address set to nullptr.

If the socket is in blocking mode the call will block until there is space for the data in the socket queue. If there is no space available and the socket is in non-blocking mode a IO_ERROR_WOULD_BLOCK error will be returned. To be notified when space is available, wait for the IO_OUT condition. Note though that you may still receive IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously notified of a IO_OUT condition. (On Windows in particular, this is very common due to the way the underlying APIs work.)

On error -1 is returned and error is set accordingly.

Since glibmm 2.22:

Parameters

buffer	The buffer containing the data to send.
size	The number of bytes to send.
cancellable	A Cancellable or `nullptr`.

Returns: Number of bytes written (which may be less than size), or -1 on error.

Exceptions

Glib::Error

◆ send_to() [1/2]

gssize Gio::Socket::send_to	(	const Glib::RefPtr< SocketAddress > &	address,
		const char *	buffer,
		gsize	size
	)

A send_to() convenience overload.

◆ send_to() [2/2]

gssize Gio::Socket::send_to	(	const Glib::RefPtr< SocketAddress > &	address,
		const char *	buffer,
		gsize	size,
		const Glib::RefPtr< Cancellable > &	cancellable
	)

Tries to send size bytes from buffer to address.

If address is nullptr then the message is sent to the default receiver (set by g_socket_connect()).

See g_socket_send() for additional information.

Since glibmm 2.22:

Parameters

address	A SocketAddress, or `nullptr`.
buffer	The buffer containing the data to send.
size	The number of bytes to send.
cancellable	A Cancellable or `nullptr`.

Returns: Number of bytes written (which may be less than size), or -1 on error.

Exceptions

Glib::Error

◆ send_with_blocking()

gssize Gio::Socket::send_with_blocking	(	gchar *	buffer,
		gsize	size,
		bool	blocking,
		const Glib::RefPtr< Cancellable > &	cancellable = `Glib::RefPtr< Cancellable >()`
	)

This behaves exactly the same as g_socket_send(), except that the choice of blocking or non-blocking behavior is determined by the blocking argument rather than by socket's properties.

Since glibmm 2.26:

Parameters

buffer	The buffer containing the data to send.
size	The number of bytes to send.
blocking	Whether to do blocking or non-blocking I/O.
cancellable	A Cancellable or `nullptr`.

Returns: Number of bytes written (which may be less than size), or -1 on error.

◆ set_blocking()

void Gio::Socket::set_blocking ( bool blocking )

Sets the blocking mode of the socket.

In blocking mode all operations (which don’t take an explicit blocking parameter) block until they succeed or there is an error. In non-blocking mode all functions return results immediately or with a IO_ERROR_WOULD_BLOCK error.

All sockets are created in blocking mode. However, note that the platform level socket is always non-blocking, and blocking mode is a GSocket level feature.

Since glibmm 2.22:

Parameters

blocking Whether to use blocking I/O or not.

◆ set_broadcast()

void Gio::Socket::set_broadcast ( bool broadcast )

Sets whether socket should allow sending to broadcast addresses.

This is false by default.

Since glibmm 2.32:

Parameters

broadcast Whether socket should allow sending to broadcast addresses.

◆ set_keepalive()

void Gio::Socket::set_keepalive ( bool keepalive )

Sets or unsets the SO_KEEPALIVE flag on the underlying socket.

When this flag is set on a socket, the system will attempt to verify that the remote socket endpoint is still present if a sufficiently long period of time passes with no data being exchanged. If the system is unable to verify the presence of the remote endpoint, it will automatically close the connection.

This option is only functional on certain kinds of sockets. (Notably, SOCKET_PROTOCOL_TCP sockets.)

The exact time between pings is system- and protocol-dependent, but will normally be at least two hours. Most commonly, you would set this flag on a server socket if you want to allow clients to remain idle for long periods of time, but also want to ensure that connections are eventually garbage-collected if clients crash or become unreachable.

Since glibmm 2.22:

Parameters

keepalive Value for the keepalive flag.

◆ set_listen_backlog()

void Gio::Socket::set_listen_backlog ( int backlog )

Sets the maximum number of outstanding connections allowed when listening on this socket.

If more clients than this are connecting to the socket and the application is not handling them on time then the new connections will be refused.

Note that this must be called before g_socket_listen() and has no effect if called after that.

Since glibmm 2.22:

Parameters

backlog The maximum number of pending connections.

◆ set_multicast_loopback()

void Gio::Socket::set_multicast_loopback ( bool loopback )

Sets whether outgoing multicast packets will be received by sockets listening on that multicast address on the same host.

This is true by default.

Since glibmm 2.32:

Parameters

loopback Whether socket should receive messages sent to its multicast groups from the local host.

◆ set_multicast_ttl()

void Gio::Socket::set_multicast_ttl ( guint ttl )

Sets the time-to-live for outgoing multicast datagrams on socket.

By default, this is 1, meaning that multicast packets will not leave the local network.

Since glibmm 2.32:

Parameters

ttl	The time-to-live value for all multicast datagrams on socket.

◆ set_option()

bool Gio::Socket::set_option	(	int	level,
		int	optname,
		int	value
	)

Sets the value of an integer-valued option on socket, as with setsockopt().

(If you need to set a non-integer-valued option, you will need to call setsockopt() directly.)

The [<gio/gnetworking.h>][gio-gnetworking.h] header pulls in system headers that will define most of the standard/portable socket options. For unusual socket protocols or platform-dependent options, you may need to include additional headers.

Since glibmm 2.36:

Parameters

level	The "API level" of the option (eg, `SOL_SOCKET`).
optname	The "name" of the option (eg, `SO_BROADCAST`).
value	The value to set the option to.

Returns: Success or failure. On failure, error will be set, and the system error value (errno or WSAGetLastError()) will still be set to the result of the setsockopt() call.

Exceptions

Glib::Error

◆ set_timeout()

void Gio::Socket::set_timeout ( guint timeout )

Sets the time in seconds after which I/O operations on socket will time out if they have not yet completed.

On a blocking socket, this means that any blocking Socket operation will time out after timeout seconds of inactivity, returning IO_ERROR_TIMED_OUT.

On a non-blocking socket, calls to g_socket_condition_wait() will also fail with IO_ERROR_TIMED_OUT after the given time. Sources created with g_socket_create_source() will trigger after timeout seconds of inactivity, with the requested condition set, at which point calling g_socket_receive(), g_socket_send(), g_socket_check_connect_result(), etc, will fail with IO_ERROR_TIMED_OUT.

If timeout is 0 (the default), operations will never time out on their own.

Note that if an I/O operation is interrupted by a signal, this may cause the timeout to be reset.

Since glibmm 2.26:

Parameters

timeout The timeout for socket, in seconds, or 0 for none.

◆ set_ttl()

void Gio::Socket::set_ttl ( guint ttl )

Sets the time-to-live for outgoing unicast packets on socket.

By default the platform-specific default value is used.

Since glibmm 2.32:

Parameters

ttl	The time-to-live value for all unicast packets on socket.

◆ shutdown()

void Gio::Socket::shutdown	(	bool	shutdown_read,
		bool	shutdown_write
	)

Shut down part or all of a full-duplex connection.

If shutdown_read is true then the receiving side of the connection is shut down, and further reading is disallowed.

If shutdown_write is true then the sending side of the connection is shut down, and further writing is disallowed.

It is allowed for both shutdown_read and shutdown_write to be true.

One example where it is useful to shut down only one side of a connection is graceful disconnect for TCP connections where you close the sending side, then wait for the other side to close the connection, thus ensuring that the other side saw all sent data.

Since glibmm 2.22:

Parameters

shutdown_read	Whether to shut down the read side.
shutdown_write	Whether to shut down the write side.

Exceptions

Glib::Error

◆ speaks_ipv4()

bool Gio::Socket::speaks_ipv4 ( ) const

Checks if a socket is capable of speaking IPv4.

IPv4 sockets are capable of speaking IPv4. On some operating systems and under some combinations of circumstances IPv6 sockets are also capable of speaking IPv4. See RFC 3493 section 3.7 for more information.

No other types of sockets are currently considered as being capable of speaking IPv4.

Since glibmm 2.22:

Returns: true if this socket can be used with IPv4.

Friends And Related Function Documentation

◆ wrap()

Glib::RefPtr< Gio::Socket > wrap	(	GSocket *	object,
		bool	take_copy = `false`
	)

Parameters

object	The C instance.
take_copy	False if the result should take ownership of the C instance. True if it should take a new copy or ref.

Returns: A C++ instance that wraps this C instance.

Public Member Functions

Static Public Member Functions

Protected Member Functions

Related Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Socket() [1/3]

◆ ~Socket()

◆ Socket() [2/3]

◆ Socket() [3/3]

Member Function Documentation

◆ accept() [1/2]

◆ accept() [2/2]

◆ bind()

◆ check_connect_result()

◆ close()

◆ condition_check()

◆ condition_timed_wait() [1/2]

◆ condition_timed_wait() [2/2]

◆ condition_wait() [1/2]

◆ condition_wait() [2/2]

◆ connect() [1/2]

◆ connect() [2/2]

◆ create()

◆ create_from_fd()

◆ create_source()

◆ get_available_bytes()

◆ get_blocking()

◆ get_broadcast()

◆ get_credentials() [1/2]

◆ get_credentials() [2/2]

◆ get_family()

◆ get_fd()

◆ get_keepalive()

◆ get_listen_backlog()

◆ get_local_address()

◆ get_multicast_loopback()

◆ get_multicast_ttl()

◆ get_option()

◆ get_protocol()

◆ get_remote_address()

◆ get_socket_type()

◆ get_timeout()

◆ get_ttl()

◆ get_type()

◆ gobj() [1/2]

◆ gobj() [2/2]

◆ gobj_copy()

◆ is_closed()

◆ is_connected()

◆ join_multicast_group() [1/2]

◆ join_multicast_group() [2/2]

◆ leave_multicast_group() [1/2]

◆ leave_multicast_group() [2/2]

◆ listen()

◆ operator=()

◆ property_blocking() [1/2]

◆ property_blocking() [2/2]

◆ property_broadcast() [1/2]

◆ property_broadcast() [2/2]

◆ property_family()

◆ property_fd()

◆ property_keepalive() [1/2]

◆ property_keepalive() [2/2]

◆ property_listen_backlog() [1/2]

◆ property_listen_backlog() [2/2]

◆ property_local_address()

◆ property_multicast_loopback() [1/2]

◆ property_multicast_loopback() [2/2]

◆ property_multicast_ttl() [1/2]

◆ property_multicast_ttl() [2/2]

◆ property_protocol()

◆ property_remote_address()

◆ property_timeout() [1/2]

◆ property_timeout() [2/2]

◆ property_ttl() [1/2]

◆ property_ttl() [2/2]

◆ property_type()

◆ receive() [1/2]