Introduction
This plugin uses the MCU to write all the dock firmware components. The MCU version is provided by the DMC bcdDevice.
This plugin supports the following protocol ID:
com.qsi.dock
GUID Generation
These devices use the standard USB DeviceInstanceId values, e.g.
USB\VID_047D&PID_808D&REV_0001USB\VID_047D&PID_808DUSB\VID_047D
Update Behavior
The device usually presents in runtime mode, but on detach re-enumerates with the same USB PID in an unlocked mode. On attach the device again re-enumerates back to the runtime locked mode.
Vendor ID Security
The vendor ID is set from the USB vendor.
External Interface Access
This plugin requires read/write access to /dev/bus/usb.