Introduction
The EP963x is a generic MCU used in many different products.
Firmware Format
The daemon will decompress the cabinet archive and extract a firmware blob in a packed binary file format.
This plugin supports the following protocol ID:
tw.com.exploretech.ep963x
GUID Generation
These devices use the standard USB DeviceInstanceId values, e.g.
USB\VID_17EF&PID_7226&REV_0001USB\VID_17EF&PID_7226USB\VID_17EF
Update Behavior
The device usually presents in runtime mode, but on detach re-enumerates with the same USB PID in an unlocked mode. On attach the device again re-enumerates back to the runtime locked mode.
Vendor ID Security
The vendor ID is set from the USB vendor, in this instance set to USB:0x17EF
External Interface Access
This plugin requires read/write access to /dev/bus/usb.