17. DPDK Release 18.08

17.1. New Features

  • Added support for Hyper-V netvsc PMD.

    The new netvsc poll mode driver provides native support for networking on Hyper-V. See the Netvsc poll mode driver NIC driver guide for more details on this new driver.

  • Added Flow API support for CXGBE PMD.

    Flow API support has been added to CXGBE Poll Mode Driver to offload flows to Chelsio T5/T6 NICs. Support added for:

    • Wildcard (LE-TCAM) and Exact (HASH) match filters.

    • Match items: physical ingress port, IPv4, IPv6, TCP and UDP.

    • Action items: queue, drop, count, and physical egress port redirect.

  • Added ixgbe preferred Rx/Tx parameters.

    Rather than applications providing explicit Rx and Tx parameters such as queue and burst sizes, they can request that the EAL instead uses preferred values provided by the PMD, falling back to defaults within the EAL if the PMD does not provide any. The provision of such tuned values now includes the ixgbe PMD.

  • Added descriptor status check support for fm10k.

    The rte_eth_rx_descriptor_status and rte_eth_tx_descriptor_status APIs are now supported by fm10K.

  • Updated the enic driver.

    • Add low cycle count Tx handler for no-offload Tx.

    • Add low cycle count Rx handler for non-scattered Rx.

    • Minor performance improvements to scattered Rx handler.

    • Add handlers to add/delete VxLAN port number.

    • Add devarg to specify ingress VLAN rewrite mode.

  • Updated mlx5 driver.

    Updated the mlx5 driver including the following changes:

    • Added port representors support.

    • Added Flow API support for e-switch rules. Added support for ACTION_PORT_ID, ACTION_DROP, ACTION_OF_POP_VLAN, ACTION_OF_PUSH_VLAN, ACTION_OF_SET_VLAN_VID, ACTION_OF_SET_VLAN_PCP and ITEM_PORT_ID.

    • Added support for 32-bit compilation.

  • Added TSO support for the mlx4 driver.

    Added TSO support for the mlx4 drivers from MLNX_OFED_4.4 and above.

  • SoftNIC PMD rework.

    The SoftNIC PMD infrastructure has been restructured to use the Packet Framework, which makes it more flexible, modular and easier to add new functionality in the future.

  • Updated the AESNI MB PMD.

    The AESNI MB PMD has been updated with additional support for:

    • 3DES for 8, 16 and 24 byte keys.

  • Added a new compression PMD using Intel’s QuickAssist (QAT) device family.

    Added the new QAT compression driver, for compression and decompression operations in software. See the Intel(R) QuickAssist (QAT) Compression Poll Mode Driver compression driver guide for details on this new driver.

  • Updated the ISA-L PMD.

    Added support for chained mbufs (input and output).

17.2. API Changes

  • The path to the runtime config file has changed. The new path is determined as follows:

    • If DPDK is running as root, /var/run/dpdk/<prefix>/config

    • If DPDK is not running as root:

      • If $XDG_RUNTIME_DIR is set, ${XDG_RUNTIME_DIR}/dpdk/<prefix>/config

      • Otherwise, /tmp/dpdk/<prefix>/config

  • eal: The function rte_eal_mbuf_default_mempool_ops was deprecated and is removed in 18.08. It shall be replaced by rte_mbuf_best_mempool_ops.

  • mempool: Following functions were deprecated and are removed in 18.08:

    • rte_mempool_populate_iova_tab

    • rte_mempool_populate_phys_tab

    • rte_mempool_populate_phys (rte_mempool_populate_iova should be used)

    • rte_mempool_virt2phy (rte_mempool_virt2iova should be used)

    • rte_mempool_xmem_create

    • rte_mempool_xmem_size

    • rte_mempool_xmem_usage

  • ethdev: The old offload API is removed:

    • Rx per-port rte_eth_conf.rxmode.[bit-fields]

    • Tx per-queue rte_eth_txconf.txq_flags

    • ETH_TXQ_FLAGS_NO*

    The transition bits are removed:

    • rte_eth_conf.rxmode.ignore_offload_bitfield

    • ETH_TXQ_FLAGS_IGNORE

  • cryptodev: The following API changes have been made in 18.08:

    • In struct struct rte_cryptodev_info, field rte_pci_device *pci_dev has been replaced with field struct rte_device *device.

    • Value 0 is accepted in sym.max_nb_sessions, meaning that a device supports an unlimited number of sessions.

    • Two new fields of type uint16_t have been added: min_mbuf_headroom_req and min_mbuf_tailroom_req. These parameters specify the recommended headroom and tailroom for mbufs to be processed by the PMD.

  • cryptodev: The following functions were deprecated and are removed in 18.08:

    • rte_cryptodev_queue_pair_start

    • rte_cryptodev_queue_pair_stop

    • rte_cryptodev_queue_pair_attach_sym_session

    • rte_cryptodev_queue_pair_detach_sym_session

  • cryptodev: The following functions were deprecated and are replaced by other functions in 18.08:

    • rte_cryptodev_get_header_session_size is replaced with rte_cryptodev_sym_get_header_session_size

    • rte_cryptodev_get_private_session_size is replaced with rte_cryptodev_sym_get_private_session_size

  • cryptodev: Feature flag RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER is replaced with the following more explicit flags:

    • RTE_CRYPTODEV_FF_IN_PLACE_SGL

    • RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT

    • RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT

    • RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT

    • RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT

  • cryptodev: Renamed cryptodev experimental APIs:

    Used user_data instead of private_data in following APIs to avoid confusion with the existing session parameter sess_private_data[] and related APIs.

    • rte_cryptodev_sym_session_set_private_data() changed to rte_cryptodev_sym_session_set_user_data()

    • rte_cryptodev_sym_session_get_private_data() changed to rte_cryptodev_sym_session_get_user_data()

  • compressdev: Feature flag RTE_COMP_FF_MBUF_SCATTER_GATHER is replaced with the following more explicit flags:

    • RTE_COMP_FF_OOP_SGL_IN_SGL_OUT

    • RTE_COMP_FF_OOP_SGL_IN_LB_OUT

    • RTE_COMP_FF_OOP_LB_IN_SGL_OUT

17.3. Shared Library Versions

The libraries prepended with a plus sign were incremented in this version.

  librte_acl.so.2
  librte_bbdev.so.1
  librte_bitratestats.so.2
  librte_bpf.so.1
  librte_bus_dpaa.so.1
  librte_bus_fslmc.so.1
  librte_bus_pci.so.1
  librte_bus_vdev.so.1
+ librte_bus_vmbus.so.1
  librte_cfgfile.so.2
  librte_cmdline.so.2
  librte_common_octeontx.so.1
  librte_compressdev.so.1
+ librte_cryptodev.so.5
  librte_distributor.so.1
+ librte_eal.so.8
+ librte_ethdev.so.10
+ librte_eventdev.so.5
  librte_flow_classify.so.1
  librte_gro.so.1
  librte_gso.so.1
  librte_hash.so.2
  librte_ip_frag.so.1
  librte_jobstats.so.1
  librte_kni.so.2
  librte_kvargs.so.1
  librte_latencystats.so.1
  librte_lpm.so.2
  librte_mbuf.so.4
+ librte_mempool.so.5
  librte_meter.so.2
  librte_metrics.so.1
  librte_net.so.1
  librte_pci.so.1
  librte_pdump.so.2
  librte_pipeline.so.3
  librte_pmd_bnxt.so.2
  librte_pmd_bond.so.2
  librte_pmd_i40e.so.2
  librte_pmd_ixgbe.so.2
  librte_pmd_dpaa2_cmdif.so.1
  librte_pmd_dpaa2_qdma.so.1
  librte_pmd_ring.so.2
  librte_pmd_softnic.so.1
  librte_pmd_vhost.so.2
  librte_port.so.3
  librte_power.so.1
  librte_rawdev.so.1
  librte_reorder.so.1
  librte_ring.so.2
  librte_sched.so.1
  librte_security.so.1
  librte_table.so.3
  librte_timer.so.1
  librte_vhost.so.3

17.4. Tested Platforms

  • Intel(R) platforms with Intel(R) NICs combinations

    • CPU

      • Intel(R) Atom(TM) CPU C3858 @ 2.00GHz

      • Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz

      • Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz

      • Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz

      • Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz

      • Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz

      • Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz

      • Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz

      • Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz

    • OS:

      • CentOS 7.4

      • Fedora 25

      • Fedora 27

      • Fedora 28

      • FreeBSD 11.1

      • Red Hat Enterprise Linux Server release 7.5

      • SUSE Enterprise Linux 12

      • Wind River Linux 8

      • Ubuntu 14.04

      • Ubuntu 16.04

      • Ubuntu 16.10

      • Ubuntu 17.10

      • Ubuntu 18.04

    • NICs:

      • Intel(R) 82599ES 10 Gigabit Ethernet Controller

        • Firmware version: 0x61bf0001

        • Device id (pf/vf): 8086:10fb / 8086:10ed

        • Driver version: 5.2.3 (ixgbe)

      • Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T

        • Firmware version: 0x800003e7

        • Device id (pf/vf): 8086:15ad / 8086:15a8

        • Driver version: 4.4.6 (ixgbe)

      • Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)

        • Firmware version: 6.01 0x80003221

        • Device id (pf/vf): 8086:1572 / 8086:154c

        • Driver version: 2.4.6 (i40e)

      • Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)

        • Firmware version: 3.33 0x80000fd5 0.0.0

        • Device id (pf/vf): 8086:37d0 / 8086:37cd

        • Driver version: 2.4.3 (i40e)

      • Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G)

        • Firmware version: 6.01 0x80003221

        • Device id (pf/vf): 8086:158b / 8086:154c

        • Driver version: 2.4.6 (i40e)

      • Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)

        • Firmware version: 6.01 0x8000321c

        • Device id (pf/vf): 8086:1583 / 8086:154c

        • Driver version: 2.4.6 (i40e)

      • Intel(R) Corporation I350 Gigabit Network Connection

        • Firmware version: 1.63, 0x80000dda

        • Device id (pf/vf): 8086:1521 / 8086:1520

        • Driver version: 5.4.0-k (igb)

  • Intel(R) platforms with Mellanox(R) NICs combinations

    • CPU:

      • Intel(R) Xeon(R) Gold 6154 CPU @ 3.00GHz

      • Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz

      • Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz

      • Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz

      • Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz

      • Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz

      • Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz

    • OS:

      • Red Hat Enterprise Linux Server release 7.5 (Maipo)

      • Red Hat Enterprise Linux Server release 7.4 (Maipo)

      • Red Hat Enterprise Linux Server release 7.3 (Maipo)

      • Red Hat Enterprise Linux Server release 7.2 (Maipo)

      • Ubuntu 18.04

      • Ubuntu 17.10

      • Ubuntu 16.04

      • SUSE Linux Enterprise Server 15

    • MLNX_OFED: 4.3-2.0.2.0

    • MLNX_OFED: 4.4-2.0.1.0

    • NICs:

      • Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1007

        • Firmware version: 2.42.5000

      • Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)

        • Host interface: PCI Express 3.0 x16

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)

        • Host interface: PCI Express 3.0 x16

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)

        • Host interface: PCI Express 3.0 x16

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)

        • Host interface: PCI Express 3.0 x16

        • Device ID: 15b3:1013

        • Firmware version: 12.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1015

        • Firmware version: 14.21.1000 and above

      • Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1015

        • Firmware version: 14.21.1000 and above

      • Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)

        • Host interface: PCI Express 3.0 x16

        • Device ID: 15b3:1017

        • Firmware version: 16.21.1000 and above

      • Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)

        • Host interface: PCI Express 4.0 x16

        • Device ID: 15b3:1019

        • Firmware version: 16.21.1000 and above

  • ARM platforms with Mellanox(R) NICs combinations

    • CPU:

      • Qualcomm ARM 1.1 2500MHz

    • OS:

      • Red Hat Enterprise Linux Server release 7.5 (Maipo)

    • NICs:

      • Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)

        • Host interface: PCI Express 3.0 x8

        • Device ID: 15b3:1015

        • Firmware version: 14.23.1000

      • Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)

        • Host interface: PCI Express 3.0 x16

        • Device ID: 15b3:1017

        • Firmware version: 16.23.1000

  • Mellanox BlueField SmartNIC

    • Mellanox(R) BlueField SmartNIC MT416842 (2x25G)
      • Host interface: PCI Express 3.0 x16

      • Device ID: 15b3:a2d2

      • Firmware version: 18.99.3950

    • SoC ARM cores running OS: * CentOS Linux release 7.4.1708 (AltArch) * Mellanox MLNX_OFED 4.2-1.4.21.0

    • DPDK application running on ARM cores inside SmartNIC

    • BlueField representors support planned for next release.