Uses of Class javax.print.attribute.standard.PrinterStateReason

The printer object is connecting to the device.

One or more covers of the printer device are open.

The printer device is out of developer.

The printer device is low on developer.

One or more doors of the printer device are open.

The fuser of the printer device is over temperature.

The fuser of the printer device is under the needed temperature.

One or more input trays are missing in the printer device.

One or more interlocks of the printer device are open.

An interpreter resource (e.g. font) is unavailable.

The printer device is out of marker supply.

The printer device is low on marker supply.

The marker waste bin of the printer device is almost full.

The marker waste bin of the printer device is full.

The printer device is out of media.

A media jam occured in the printer device.

The printer device is low on media.

A media tray has run out of media.

Indicates that the printer has been paused by the pause printer operation and is currently moving to the pause state.

The optical photo conductor has reached its end of life.

The optical photo conductor is near its end of life (EOL).

Any state other state not listed here.

One or more output areas of the printer device are almost full.

One or more output areas of the printer device are full.

One or more output trays are missing in the printer device.

The printer device has be paused by the pause printer operation.

The printer device has been shutdown or removed from service.

The printers spool area is currently full.

The printer object has stopped partly.

The printer object is stopping the printer device.

The connection to the device has timed out.

The printer device is out of toner.

The printer device is low on toner.

Puts the given reason object associated with the given severity object into the set.