gnu.javax.print.ipp.attribute.supported

Class FinishingsSupported

Implemented Interfaces:
Attribute, Cloneable, Serializable, SupportedValuesAttribute

public final class FinishingsSupported
extends EnumSyntax
implements SupportedValuesAttribute

The FinishingsSupported attribute provides the supported values for finishings of a job.
See Also:
Serialized Form

Field Summary

static FinishingsSupported
BIND
This value indicates that a binding is to be applied to the document.
static FinishingsSupported
COVER
Cover a document
static FinishingsSupported
EDGE_STITCH
Bind the document(s) with one or more staples (wire stitches) along one edge.
static FinishingsSupported
EDGE_STITCH_BOTTOM
Bind the document(s) with one or more staples (wire stitches) along the bottom edge.
static FinishingsSupported
EDGE_STITCH_LEFT
Bind the document(s) with one or more staples (wire stitches) along the left edge.
static FinishingsSupported
EDGE_STITCH_RIGHT
Bind the document(s) with one or more staples (wire stitches) along the right edge.
static FinishingsSupported
EDGE_STITCH_TOP
Bind the document(s) with one or more staples (wire stitches) along the top edge.
static FinishingsSupported
NONE
No finishing.
static FinishingsSupported
SADDLE_STITCH
Bind the document(s) with one or more staples (wire stitches) along the middle fold.
static FinishingsSupported
STAPLE
Staple the document(s)
static FinishingsSupported
STAPLE_BOTTOM_LEFT
Bind the document(s) with one or more staples in the bottom left corner.
static FinishingsSupported
STAPLE_BOTTOM_RIGHT
Bind the document(s) with one or more staples in the bottom right corner.
static FinishingsSupported
STAPLE_DUAL_BOTTOM
Bind the document(s) with two staples (wire stitches) along the bottom edge assuming a portrait document.
static FinishingsSupported
STAPLE_DUAL_LEFT
Bind the document(s) with two staples (wire stitches) along the left edge assuming a portrait document.
static FinishingsSupported
STAPLE_DUAL_RIGHT
Bind the document(s) with two staples (wire stitches) along the right edge assuming a portrait document.
static FinishingsSupported
STAPLE_DUAL_TOP
Bind the document(s) with two staples (wire stitches) along the top edge assuming a portrait document.
static FinishingsSupported
STAPLE_TOP_LEFT
Bind the document(s) with one or more staples in the top left corner.
static FinishingsSupported
STAPLE_TOP_RIGHT
Bind the document(s) with one or more staples in the top right corner.

Constructor Summary

FinishingsSupported(int value)
Constructs a FinishingsSupported object.

Method Summary

Class
extends Attribute> getCategory()
Returns category of this class.
Finishings
getAssociatedAttribute()
Returns the equally enum of the standard attribute class of this SupportedValuesAttribute enum.
static Finishings[]
getAssociatedAttributeArray(Set set)
Constructs an array from a set of -supported attributes.
protected EnumSyntax[]
getEnumValueTable()
Returns a table with the enumeration values for this object.
String
getName()
Returns the name of this attribute.
protected int
getOffset()
Returns the lowest used value by the enumerations of this class.
protected String[]
getStringTable()
Returns a table with the enumeration values represented as strings for this object.

Methods inherited from class javax.print.attribute.EnumSyntax

clone, getEnumValueTable, getOffset, getStringTable, getValue, hashCode, readResolve, toString

Methods inherited from class java.lang.Object

clone, equals, extends Object> getClass, finalize, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Details

BIND

public static final FinishingsSupported BIND
This value indicates that a binding is to be applied to the document. The type and placement of the binding is site-defined.

COVER

public static final FinishingsSupported COVER
Cover a document

EDGE_STITCH

public static final FinishingsSupported EDGE_STITCH
Bind the document(s) with one or more staples (wire stitches) along one edge.

EDGE_STITCH_BOTTOM

public static final FinishingsSupported EDGE_STITCH_BOTTOM
Bind the document(s) with one or more staples (wire stitches) along the bottom edge.

EDGE_STITCH_LEFT

public static final FinishingsSupported EDGE_STITCH_LEFT
Bind the document(s) with one or more staples (wire stitches) along the left edge.

EDGE_STITCH_RIGHT

public static final FinishingsSupported EDGE_STITCH_RIGHT
Bind the document(s) with one or more staples (wire stitches) along the right edge.

EDGE_STITCH_TOP

public static final FinishingsSupported EDGE_STITCH_TOP
Bind the document(s) with one or more staples (wire stitches) along the top edge.

NONE

public static final FinishingsSupported NONE
No finishing.

SADDLE_STITCH

public static final FinishingsSupported SADDLE_STITCH
Bind the document(s) with one or more staples (wire stitches) along the middle fold.

STAPLE

public static final FinishingsSupported STAPLE
Staple the document(s)

STAPLE_BOTTOM_LEFT

public static final FinishingsSupported STAPLE_BOTTOM_LEFT
Bind the document(s) with one or more staples in the bottom left corner.

STAPLE_BOTTOM_RIGHT

public static final FinishingsSupported STAPLE_BOTTOM_RIGHT
Bind the document(s) with one or more staples in the bottom right corner.

STAPLE_DUAL_BOTTOM

public static final FinishingsSupported STAPLE_DUAL_BOTTOM
Bind the document(s) with two staples (wire stitches) along the bottom edge assuming a portrait document.

STAPLE_DUAL_LEFT

public static final FinishingsSupported STAPLE_DUAL_LEFT
Bind the document(s) with two staples (wire stitches) along the left edge assuming a portrait document.

STAPLE_DUAL_RIGHT

public static final FinishingsSupported STAPLE_DUAL_RIGHT
Bind the document(s) with two staples (wire stitches) along the right edge assuming a portrait document.

STAPLE_DUAL_TOP

public static final FinishingsSupported STAPLE_DUAL_TOP
Bind the document(s) with two staples (wire stitches) along the top edge assuming a portrait document.

STAPLE_TOP_LEFT

public static final FinishingsSupported STAPLE_TOP_LEFT
Bind the document(s) with one or more staples in the top left corner.

STAPLE_TOP_RIGHT

public static final FinishingsSupported STAPLE_TOP_RIGHT
Bind the document(s) with one or more staples in the top right corner.

Constructor Details

FinishingsSupported

protected FinishingsSupported(int value)
Constructs a FinishingsSupported object.
Parameters:
value - the value

Method Details

extends Attribute> getCategory

public Classextends Attribute> getCategory()
Returns category of this class.
Returns:
the class FinishingsSupported itself

getAssociatedAttribute

public Finishings getAssociatedAttribute()
Returns the equally enum of the standard attribute class of this SupportedValuesAttribute enum.
Returns:
The enum of the standard attribute class.

getAssociatedAttributeArray

public static Finishings[] getAssociatedAttributeArray(Set set)
Constructs an array from a set of -supported attributes.
Parameters:
set - set to process
Returns:
The constructed array.

getEnumValueTable

protected EnumSyntax[] getEnumValueTable()
Returns a table with the enumeration values for this object.
Overrides:
getEnumValueTable in interface EnumSyntax
Returns:
The enumeration values.

getName

public String getName()
Returns the name of this attribute.
Specified by:
getName in interface Attribute
Returns:
The name "finishings-supported".

getOffset

protected int getOffset()
Returns the lowest used value by the enumerations of this class. .
Overrides:
getOffset in interface EnumSyntax
Returns:
The lowest value used.

getStringTable

protected String[] getStringTable()
Returns a table with the enumeration values represented as strings for this object.
Overrides:
getStringTable in interface EnumSyntax
Returns:
The enumeration values as strings.

FinishingsSupported.java -- Copyright (C) 2006 Free Software Foundation, Inc. This file is part of GNU Classpath. GNU Classpath is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Classpath is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Classpath; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Linking this library statically or dynamically with other modules is making a combined work based on this library. Thus, the terms and conditions of the GNU General Public License cover the whole combination. As a special exception, the copyright holders of this library give you permission to link this library with independent modules to produce an executable, regardless of the license terms of these independent modules, and to copy and distribute the resulting executable under terms of your choice, provided that you also meet, for each linked independent module, the terms and conditions of the license of that module. An independent module is a module which is not derived from or based on this library. If you modify this library, you may extend this exception to your version of the library, but you are not obligated to do so. If you do not wish to do so, delete this exception statement from your version.