The xsh_geom_ifu recipe =============================================================== .. data:: xsh_geom_ifu Synopsis -------- Produces the spatial geometry of the IFU pattern on the sky Description ----------- This recipe Produces the spatial geometry of the IFU pattern on the sky Input Frames : - A set of n science frames ( n == 1 or >=3, Tag = TRACE_arm) - [UVB,VIS] A master bias frame (Tag = MASTER_BIAS_arm) - [OPTIONAL] A master dark frame (Tag = MASTER_DARK_arm) - A master flat frame (Tag = MASTER_FLAT_IFU_arm) - An AFC corrected model order edges table for IFU frame (Tag = ORDER_TAB_AFC_IFU_arm) - [PHYSMOD] An AFC corrected model cfg frame (Tag = XSH_MOD_CFG_OPT_AFC_arm) - [POLY] An AFC corrected model wavesol frame (Tag = WAVE_TAB_AFC_arm) - An AFC corrected dispersion solution frame (Tag = DISP_TAB_AFC_arm) - [OPTIONAL] A badpixel map (Tag = BADPIXEL_MAP_arm) Products : - A set of shift offset tables (Tag = OFFSET_TAB_slitlet_IFU_arm) Constructor ----------- .. method:: cpl.Recipe("xsh_geom_ifu") :noindex: Create an object for the recipe xsh_geom_ifu. :: import cpl xsh_geom_ifu = cpl.Recipe("xsh_geom_ifu") Parameters ---------- .. py:attribute:: xsh_geom_ifu.param.keep_temp If 'no', temporary files are deleted. (str; default: 'no') [default="no"]. .. py:attribute:: xsh_geom_ifu.param.debug_level Additional xshooter debug level. One of 'none', 'low', 'medium', 'high' (str; default: 'none') [default="none"]. .. py:attribute:: xsh_geom_ifu.param.time_stamp Add timestamp to product file name. (bool; default: False) [default=False]. .. py:attribute:: xsh_geom_ifu.param.decode_bp Integer representation of the bits to be considered bad when decoding the bad pixel mask pixel values. Most frequent codes relevant for the user: 0: good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel, 4096: A/D converted saturation, 32768: non linear pixel, 1048576: extrapolated flux in NIR, 4194304: Interpolated flux during extraction. (int; default: 2144337919) [default=2144337919]. .. py:attribute:: xsh_geom_ifu.param.pre_overscan_corr pre-overscan correction. 0: no correction 1: mean overscan correction 2: mean prescan correction 3: (mean pre+mean overscan)/2 correction (int; default: 1) [default=1]. .. py:attribute:: xsh_geom_ifu.param.stack_method Method used to build master frame. (str; default: 'median') [default="median"]. .. py:attribute:: xsh_geom_ifu.param.klow Kappa used to clip low level values, when method is set to 'mean' (float; default: 5.0) [default=5.0]. .. py:attribute:: xsh_geom_ifu.param.khigh Kappa used to clip high level values, when method is set to 'mean' (float; default: 5.0) [default=5.0]. .. py:attribute:: xsh_geom_ifu.param.crh_clip_kappa Kappa value in sigma clipping during CRH rejection using multiple frames (float; default: 5.0) [default=5.0]. .. py:attribute:: xsh_geom_ifu.param.crh_clip_niter Number of iterations in sigma clipping during CRH rejection using multiple frames (int; default: 5) [default=5]. .. py:attribute:: xsh_geom_ifu.param.crh_clip_frac Minimal ratio of points accepted / total in sigma clipping during CRH rejection using multiple frames (float; default: 0.7) [default=0.7]. .. py:attribute:: xsh_geom_ifu.param.background_edges_margin X margin to order edge to define background sampling points (int; default: 1) [default=1]. .. py:attribute:: xsh_geom_ifu.param.background_poly_deg_y Poly mode fit deg along Y. (int; default: 9) [default=9]. .. py:attribute:: xsh_geom_ifu.param.background_poly_deg_x Poly mode fit deg along X. (int; default: 9) [default=9]. .. py:attribute:: xsh_geom_ifu.param.background_poly_kappa Poly mode kappa value of kappa-sigma-clip outliers removal. (float; default: 10.0) [default=10.0]. .. py:attribute:: xsh_geom_ifu.param.removecrhsingle_sigmalim Poisson fluctuation threshold to flag CRHs (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 5.0) [default=5.0]. .. py:attribute:: xsh_geom_ifu.param.removecrhsingle_flim Minimum contrast between the Laplacian image and the fine structure image that a point must have to be flagged as CRH. (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 2.0) [default=2.0]. .. py:attribute:: xsh_geom_ifu.param.removecrhsingle_niter Max number of iterations (int; default: 4) [default=4]. .. py:attribute:: xsh_geom_ifu.param.rectify_kernel Name of the Interpolation Kernel Used. Possible values are: tanh, sinc, sinc2, lanczos, hamming, hann. (str; default: 'tanh') [default="tanh"]. .. py:attribute:: xsh_geom_ifu.param.rectify_radius Rectify Interpolation radius [bin units]. (float; default: 4.0) [default=4.0]. .. py:attribute:: xsh_geom_ifu.param.rectify_bin_lambda Wavelength step in the output spectrum [nm] (float; default: -1.0) [default=-1.0]. .. py:attribute:: xsh_geom_ifu.param.rectify_bin_slit Spatial step along the slit in the output spectrum [arcsec] (float; default: -1.0) [default=-1.0]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_bckg_deg Degree (<=2) of the polynomial component in the cross-dispersion profile fit (int; default: 50) [default=50]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_smooth_hsize Half-size of the median filter for smoothing the cross-dispersion profile prior to localization (int; default: 3) [default=3]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_wavelet_nscales Number of scales used for wavelet a trous algorithm (int; default: 5) [default=5]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_wavelet_hf_skip Number of high frequency scales skipped from the wavelet decomposition (int; default: 2) [default=2]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_sigma_low Gaussian fits of the cross-dispersion profile whose FWHM is lower than this value are rejected (float; default: 0.05) [default=0.05]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_sigma_up Gaussian fits of the cross-dispersion profile whose FWHM is larger than this value are rejected (float; default: 0.95) [default=0.95]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_snr_low Gaussian fits of the cross-dispersion profile whose SNR is lower than this value are rejected (float; default: 0.05) [default=0.05]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_snr_up Gaussian fits of the cross-dispersion profile whose SNR is larger than this value are rejected (float; default: 0.95) [default=0.95]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_slitlow_edges_mask in arsec (float; default: 0.0) [default=0.0]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_slitup_edges_mask in arsec (float; default: 0.0) [default=0.0]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_use_skymask TRUE if we want to mask sky lines using SKY_LINE_LIST file. (bool; default: False) [default=False]. .. py:attribute:: xsh_geom_ifu.param.localizeifu_chunk_hsize Half size of chunk [bin] (int; default: 0) [default=0]. .. py:attribute:: xsh_geom_ifu.param.correctifu_niter Number of iterations in computing the localization shifts of the IFU slitlets (int; default: 3) [default=3]. .. py:attribute:: xsh_geom_ifu.param.correctifu_lambdaref Reference wavelength where the reference localization on the slit is chosen (float; default: -1.0) [default=-1.0]. .. py:attribute:: xsh_geom_ifu.param.correctifu_lambdaref_hsize HAlf size in nm to estimate reference wavelength (float; default: 2.5) [default=2.5]. .. py:attribute:: xsh_geom_ifu.param.do_cube if TRUE creates a data cube (bool; default: False) [default=False]. .. py:attribute:: xsh_geom_ifu.param.compute_map if TRUE recompute (wave and slit) maps from the dispersion solution. (bool; default: True) [default=True]. .. py:attribute:: xsh_geom_ifu.param.check_afc Input AFC corrected model/wave solution and science frame check.If TRUE the recipe verify that the input mode/wave solution is AFC corrected, its INS.OPTIi.NAME is 'Pin_0.5 ', and its OBS.ID and OBS.TARG.NAME values matches with the corresponding values of the science frame. (bool; default: True) [default=True]. .. py:attribute:: xsh_geom_ifu.param.flat_method method adopted for flat: (str; default: 'blaze') [default="blaze"]. The following code snippet shows the default settings for the available parameters. :: import cpl xsh_geom_ifu = cpl.Recipe("xsh_geom_ifu") xsh_geom_ifu.param.keep_temp = "no" xsh_geom_ifu.param.debug_level = "none" xsh_geom_ifu.param.time_stamp = False xsh_geom_ifu.param.decode_bp = 2144337919 xsh_geom_ifu.param.pre_overscan_corr = 1 xsh_geom_ifu.param.stack_method = "median" xsh_geom_ifu.param.klow = 5.0 xsh_geom_ifu.param.khigh = 5.0 xsh_geom_ifu.param.crh_clip_kappa = 5.0 xsh_geom_ifu.param.crh_clip_niter = 5 xsh_geom_ifu.param.crh_clip_frac = 0.7 xsh_geom_ifu.param.background_edges_margin = 1 xsh_geom_ifu.param.background_poly_deg_y = 9 xsh_geom_ifu.param.background_poly_deg_x = 9 xsh_geom_ifu.param.background_poly_kappa = 10.0 xsh_geom_ifu.param.removecrhsingle_sigmalim = 5.0 xsh_geom_ifu.param.removecrhsingle_flim = 2.0 xsh_geom_ifu.param.removecrhsingle_niter = 4 xsh_geom_ifu.param.rectify_kernel = "tanh" xsh_geom_ifu.param.rectify_radius = 4.0 xsh_geom_ifu.param.rectify_bin_lambda = -1.0 xsh_geom_ifu.param.rectify_bin_slit = -1.0 xsh_geom_ifu.param.localizeifu_bckg_deg = 50 xsh_geom_ifu.param.localizeifu_smooth_hsize = 3 xsh_geom_ifu.param.localizeifu_wavelet_nscales = 5 xsh_geom_ifu.param.localizeifu_wavelet_hf_skip = 2 xsh_geom_ifu.param.localizeifu_sigma_low = 0.05 xsh_geom_ifu.param.localizeifu_sigma_up = 0.95 xsh_geom_ifu.param.localizeifu_snr_low = 0.05 xsh_geom_ifu.param.localizeifu_snr_up = 0.95 xsh_geom_ifu.param.localizeifu_slitlow_edges_mask = 0.0 xsh_geom_ifu.param.localizeifu_slitup_edges_mask = 0.0 xsh_geom_ifu.param.localizeifu_use_skymask = False xsh_geom_ifu.param.localizeifu_chunk_hsize = 0 xsh_geom_ifu.param.correctifu_niter = 3 xsh_geom_ifu.param.correctifu_lambdaref = -1.0 xsh_geom_ifu.param.correctifu_lambdaref_hsize = 2.5 xsh_geom_ifu.param.do_cube = False xsh_geom_ifu.param.compute_map = True xsh_geom_ifu.param.check_afc = True xsh_geom_ifu.param.flat_method = "blaze" You may also set or overwrite some or all parameters by the recipe parameter `param`, as shown in the following example: :: import cpl xsh_geom_ifu = cpl.Recipe("xsh_geom_ifu") [...] res = xsh_geom_ifu( ..., param = {"keep_temp":"no", "debug_level":"none"}) .. seealso:: `cpl.Recipe `_ for more information about the recipe object. Bug reports ----------- Please report any problems to `P.Goldoni, L.Guglielmi, R. Haigron, F. Royer `_. Alternatively, you may send a report to the `ESO User Support Department `_. Copyright --------- This file is part of the X-shooter Instrument Pipeline Copyright (C) 2006 European Southern Observatory This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA .. codeauthor:: P.Goldoni, L.Guglielmi, R. Haigron, F. Royer