cs_rad_transfer_wall_flux.h File Reference

Go to the source code of this file.

Functions
void	cs_rad_transfer_wall_flux (int nvar, int ivart, int isothp[], cs_real_t *tmin, cs_real_t *tmax, cs_real_t *tx, cs_real_t *rcodcl, cs_real_t tparop[], cs_real_t qincip[], cs_real_t textp[], cs_real_t tintp[], cs_real_t xlamp[], cs_real_t epap[], cs_real_t epsp[], cs_real_t hfconp[], cs_real_t flconp[], cs_real_t tempkp[])
	Wall temperature computation with flux balance. More...

Function Documentation

cs_rad_transfer_wall_flux()

void cs_rad_transfer_wall_flux	(	int	nvar,
		int	ivart,
		int	isothp[],
		cs_real_t *	tmin,
		cs_real_t *	tmax,
		cs_real_t *	tx,
		cs_real_t *	rcodcl,
		cs_real_t	tparop[],
		cs_real_t	qincip[],
		cs_real_t	textp[],
		cs_real_t	tintp[],
		cs_real_t	xlamp[],
		cs_real_t	epap[],
		cs_real_t	epsp[],
		cs_real_t	hfconp[],
		cs_real_t	flconp[],
		cs_real_t	tempkp[]
	)

Wall temperature computation with flux balance.

Parameters

[in]	nvar	number of variable BC's
[in]	ivart	variable id of thermal variable
[in]	isothp	list of isothermal boundaries
[in]	rcodcl	boundary condition values rcodcl[0] = Dirichlet value rcodcl[1] = exchange coefficient value. (infinite if no exchange) rcodcl[2] = flux density value (negative if gain) in w/m2 or rugosity height (m) if icodcl=6, for velocities, (vistl+visct)*gradu for pressure, dt*gradp, for scalars, cp*(viscls+visct/turb_schmidt)*gradt
[out]	tparop	wall temperature in Kelvin
[in]	qincip	radiative flux density at boundaries
[in]	textp	exterior boundary temperature in degrees C
[in]	tintp	interior boundary temperature in degrees C
[in]	xlamp	thermal conductivity coefficient of wall faces (w/m/k)
[in]	epap	wall thickness (m)
[in]	epsp	wall emissivity
[in]	hfconp	boundary fluid exchange coefficient
[in]	flconp	boundary convective flux density
[in]	tempkp	temperature in Kelvin
[in]	nvar	number of variable BC's
[in]	ivart	variable id of thermal variable
[in]	isothp	list of isothermal boundaries
[in]	rcodcl	boundary condition values rcodcl[0] = Dirichlet value rcodcl[1] = exchange coefficient value. (infinite if no exchange) rcodcl[2] = flux density value (negative if gain) in w/m2 or rugosity height (m) if icodcl=6, for velocities, (vistl+visct)*gradu for pressure, dt*gradp, for scalars, cp*(viscls+visct/turb_schmidt)*gradt
[out]	tparop	wall temperature in Kelvin
[in]	qincip	dradiative flux density at boundaries
[in]	textp	exterior boundary temperature in degrees C
[in]	tintp	interior boundary temperature in degrees C
[in]	xlamp	thermal conductivity coefficient of wall faces (w/m/k)
[in]	epap	wall thickness (m)
[in]	epsp	wall emissivity
[in]	hfconp	boundary fluid exchange coefficient
[in]	flconp	boundary convective flux density
[in]	tempkp	temperature in Kelvin