3.10 Access Types

Discussion: A name denotes an entity; an access value designates an entity. The “dereference” of an access value X, written “X.all”, is a name that denotes the entity designated by X. 

{AI05-0299-1} Access values should always be well defined (barring uses of certain unchecked features of Clause 13). In particular, uninitialized access variables should be prevented by compile-time rules.

Implementation Note: The value of an access type will typically be a machine address. However, a value of a pool-specific access type can be represented as an offset (or index) relative to its storage pool, since it can point only to the elements of that pool. 

Glossary entry: An aliased view of an object is one that can be designated by an access value. Objects allocated by allocators are aliased. Objects can also be explicitly declared as aliased with the reserved word aliased. The Access attribute can be used to create an access value designating an aliased object.

Ramification: The current instance of a nonlimited type is not aliased.

The object created by an allocator is aliased, but not its subcomponents, except of course for those that themselves have aliased in their component_definition.

The renaming of an aliased object is aliased.

Slices are never aliased. See 4.1.2 for more discussion. 

Reason: {AI95-00225-01} The current instance of a limited type is defined to be aliased so that an access discriminant of a component can be initialized with T'Access inside the definition of T. Note that we don't want this to apply to a type that could become nonlimited later within its immediate scope, so we require the full definition to be limited.

A formal parameter of a tagged type is defined to be aliased so that a (tagged) parameter X may be passed to an access parameter P by using P => X'Access. Access parameters are most important for tagged types because of dispatching-on-access-parameters (see 3.9.2). By restricting this to formal parameters, we minimize problems associated with allowing components that are not declared aliased to be pointed-to from within the same record.

A view conversion of an aliased view is aliased so that the type of an access parameter can be changed without first converting to a named access type. For example:

This paragraph was deleted.{AI95-00363-01}

We considered making more kinds of objects aliased by default. In particular, any object of a by-reference type will pretty much have to be allocated at an addressable location, so it can be passed by reference without using bit-field pointers. Therefore, one might wish to allow the Access and Unchecked_Access attributes for such objects. However, private parts are transparent to the definition of “by-reference type”, so if we made all objects of a by-reference type aliased, we would be violating the privacy of private parts. Instead, we would have to define a concept of “visibly by-reference” and base the rule on that. This seemed to complicate the rules more than it was worth, especially since there is no way to declare an untagged limited private type to be by-reference, since the full type might by nonlimited.

Discussion: Note that we do not use the term “aliased” to refer to formal parameters that are referenced through multiple access paths (see 6.2). 

To be honest: The type of the designated subtype is called the designated type. 

Reason: The modifier all was picked to suggest that values of a general access type could point into “all” storage pools, as well as to objects declared aliased, and that “all” access (both read and update) to the designated object was provided. We couldn't think of any use for pool-specific access-to-constant types, so any access type defined with the modifier constant is considered a general access type, and can point into any storage pool or at other (appropriate) aliased objects. 

Implementation Note: The predefined generic Unchecked_Deallocation can be instantiated for any named access-to-variable type. There is no (language-defined) support for deallocating objects designated by a value of an access-to-constant type. Because of this, an allocator for an access-to-constant type can allocate out of a storage pool with no support for deallocation. Frequently, the allocation can be done at link-time, if the size and initial value are known then. 

Discussion: For the purpose of generic formal type matching, the relevant subclasses of access types are access-to-subprogram types, access-to-constant types, and (named) access-to-variable types, with its subclass (named) general access-to-variable types. Pool-specific access-to-variable types are not a separately matchable subclass of types, since they don't have any “extra” operations relative to all (named) access-to-variable types. 

Ramification: The calling convention protected is in italics to emphasize that it cannot be specified explicitly by the user. This is a consequence of it being a reserved word. 

Implementation Note: {AI95-00254-01} For a named access-to-subprogram type, the representation of an access value might include implementation-defined information needed to support up-level references — for example, a static link. The accessibility rules (see 3.10.2) ensure that in a "global-display-based" implementation model (as opposed to a static-link-based model), a named access-to-(unprotected)-subprogram value need consist only of the address of the subprogram. The global display is guaranteed to be properly set up any time the designated subprogram is called. Even in a static-link-based model, the only time a static link is definitely required is for an access-to-subprogram type declared in a scope nested at least two levels deep within subprogram or task bodies, since values of such a type might designate subprograms nested a smaller number of levels. For the normal case of a named access-to-subprogram type declared at the outermost (library) level, a code address by itself should be sufficient to represent the access value in many implementations.

For access-to-protected-subprogram, the access values will necessarily include both an address (or other identification) of the code of the subprogram, as well as the address of the associated protected object. This could be thought of as a static link, but it will be needed even for global-display-based implementation models. It corresponds to the value of the “implicit parameter” that is passed into every call of a protected operation, to identify the current instance of the protected type on which they are to operate.

Any Elaboration_Check is performed when a call is made through an access value, rather than when the access value is first "created" via a 'Access. For implementation models that normally put that check at the call-site, an access value will have to point to a separate entry point that does the check. Alternatively, the access value could point to a "subprogram descriptor" that consisted of two words (or perhaps more), the first being the address of the code, the second being the elaboration bit. Or perhaps more efficiently, just the address of the code, but using the trick that the descriptor is initialized to point to a Raise-Program-Error routine initially, and then set to point to the "real" code when the body is elaborated.

For implementations that share code between generic instantiations, the extra level of indirection suggested above to support Elaboration_Checks could also be used to provide a pointer to the per-instance data area normally required when calling shared code. The trick would be to put a pointer to the per-instance data area into the subprogram descriptor, and then make sure that the address of the subprogram descriptor is loaded into a "known" register whenever an indirect call is performed. Once inside the shared code, the address of the per-instance data area can be retrieved out of the subprogram descriptor, by indexing off the "known" register.

This paragraph was deleted.{AI95-00344-01}

{AI95-00254-01} Note that access parameters of an anonymous access-to-subprogram type are permitted. Such parameters represent full “downward” closures, meaning that in an implementation that uses a per-task (global) display, the display will have to be passed as a hidden parameter, and reconstructed at the point of call. 

This paragraph was deleted.{AI95-00231-01}

This paragraph was deleted.{AI95-00231-01}

Reason: {AI95-00231-01} An access_definition used in a controlling parameter excludes null because it is necessary to read the tag to dispatch, and null has no tag. We would have preferred to require not null to be specified for such parameters, but that would have been too incompatible with Ada 95 code to require.

{AI95-00416-01} Note that we considered imposing a similar implicit null exclusion for controlling access results, but chose not to do that, because there is no Ada 95 compatibility issue, and there is no automatic null check inherent in the use of a controlling access result. If a null check is necessary, it is because there is a dereference of the result, or because the value is passed to a parameter whose subtype excludes null. If there is no dereference of the result, a null return value is perfectly acceptable, and can be a useful indication of a particular status of the call. 

Proof: The Legality Rules on range_constraints (see 3.5) do not permit the subtype_mark of the subtype_indication to denote an access-to-scalar type, only a scalar type. The Legality Rules on index_constraints (see 3.6.1) and discriminant_constraints (see 3.7.1) both permit access-to-composite types in a subtype_indication with such _constraints. Note that an access-to-access-to-composite is never permitted in a subtype_indication with a constraint.

Reason: {AI95-00363-01} Only composite_constraints are permitted for an access type, and only on access-to-composite types. A constraint on an access-to-scalar or access-to-access type might be violated due to assignments via other access paths that were not so constrained. By contrast, if the designated subtype is an array or discriminated type without defaults, the constraint could not be violated by unconstrained assignments, since array objects are always constrained, and discriminated objects are also constrained when the type does not have defaults for its discriminants. Constraints are not allowed on general access-to-unconstrained discriminated types if the type has defaults for its discriminants; constraints on pool-specific access types are usually allowed because allocated objects are usually constrained by their initial value. 

To be honest: {AI95-00231-01} This means “directly allowed in”; we are not talking about a null_exclusion that occurs in an access_definition in one of these constructs (for an access_definition, the subtype_mark in such an access_definition is not restricted). 

Reason: {AI95-00231-01} This is similar to doubly constraining a composite subtype, which we also don't allow. 

The syntax for access_type_definition is changed to support general access types (including access-to-constants) and access-to-subprograms. The syntax rules for general_access_modifier and access_definition are new. 

{AI05-0190-1} We use the term "storage pool" to talk about the data area from which allocation takes place. The term "collection" is only used for finalization. ("Collection" and "storage pool" are not the same thing because multiple unrelated access types can share the same storage pool; see 13.11 for more discussion.) 

{AI95-00231-01} Access discriminants and noncontrolling access parameters no longer exclude null. A program which passed null to such an access discriminant or access parameter and expected it to raise Constraint_Error may fail when compiled with Ada 2005. One hopes that there no such programs outside of the ACATS. (Of course, a program which actually wants to pass null will work, which is far more likely.)

{AI95-00363-01} Most unconstrained aliased objects with defaulted discriminants are no longer constrained by their initial values. This means that a program that raised Constraint_Error from an attempt to change the discriminants will no longer do so. The change only affects programs that depended on the raising of Constraint_Error in this case, so the inconsistency is unlikely to occur outside of the ACATS. This change may however cause compilers to implement these objects differently, possibly taking additional memory or time. This is unlikely to be worse than the differences caused by any major compiler upgrade. 

{AI95-00225-01} Amendment Correction: The rule defining when a current instance of a limited type is considered to be aliased has been tightened to apply only to types that cannot become nonlimited. A program that attempts to take 'Access of the current instance of a limited type that can become nonlimited will be illegal in Ada 2005. While original Ada 95 allowed the current instance of any limited type to be treated as aliased, this was inconsistently implemented in compilers, and was likely to not work as expected for types that are ultimately nonlimited. 

{AI95-00231-01} The null_exclusion is new. It can be used in both anonymous and named access type definitions. It is most useful to declare that parameters cannot be null, thus eliminating the need for checks on use.

{AI95-00231-01} {AI95-00254-01} {AI95-00404-01} The kinds of anonymous access types allowed were increased by adding anonymous access-to-constant and anonymous access-to-subprogram types. Anonymous access-to-subprogram types used as parameters allow passing of subprograms at any level. 

{8652/0012} {AI95-00062-01} Corrigendum: Added accidentally-omitted wording that says that a derived access type shares its storage pool with its parent type. This was clearly intended, both because of a note in 3.4, and because anything else would have been incompatible with Ada 83.

{8652/0013} {AI95-00012-01} Corrigendum: Fixed typographical errors in the description of when access types are constrained.

{AI95-00230-01} The wording was fixed to allow allocators and the literal null for anonymous access types. The former was clearly intended by Ada 95; see the Implementation Advice in 13.11.

{AI95-00363-01} The rules about aliased objects being constrained by their initial values now apply only to allocated objects, and thus have been moved to 4.8, “Allocators”. 

{AI05-0053-1} {AI05-0277-1} Correction: The rule about a current instance being aliased now is worded in terms of immutably limited types. Wording was also added to make extended return object declarations that have the keyword aliased be considered aliased. This latter was a significant oversight in Ada 2005 — technically, the keyword aliased had no effect. But of course implementations followed the intent, not the letter of the Standard.

{AI05-0142-4} Explicitly aliased parameters (see 6.1) are defined to be aliased.