NAME

install-tl - TeX Live cross-platform installer

SYNOPSIS

install-tl [option]...

install-tl-windows.bat [option]...

DESCRIPTION

This installer creates a runnable TeX Live installation from various media, including over the network, from local hard disk, a DVD, etc. The installer works on all platforms supported by TeX Live. For information on initially downloading TeX Live, see https://tug.org/texlive/acquire.html.

The basic idea of TeX Live installation is for you to choose one of the top-level schemes, each of which is defined as a different set of collections and packages, where a collection is a set of packages, and a package is what contains actual files. Each package is in exactly one collection, while schemes can contain any combination of packages and collections.

Within the installer, you can choose a scheme, and further customize the set of collections to install, but not the set of the packages. To work at the package level, use tlmgr (reference just below) after the initial installation is complete.

The default is scheme-full, which installs everything, and this is highly recommended.

REFERENCES

Post-installation configuration, package updates, and more, are handled through tlmgr(1), the TeX Live Manager (https://tug.org/texlive/tlmgr.html).

The most up-to-date version of this installer documentation is on the Internet at https://tug.org/texlive/doc/install-tl.html.

For step-by-step instructions, see https://tug.org/texlive/quickinstall.html.

For the full documentation of TeX Live, see https://tug.org/texlive/doc.

EXAMPLES

With no options, install-tl drops you into an interactive menu where essentially all default settings can be changed. With options, you can initialize the settings in various ways, or perform the installation without interaction. Some examples:

install-tl --paper=letter

Initialize paper size setting. The only values allowed are letter and (the default) a4.

install-tl --scheme scheme

Initialize the installation scheme; the default is full. For a list of schemes, see the interactive S menu.

install-tl --no-interaction

Perform the installation immediately after parsing options, without entering the interactive menu.

install-tl --profile texlive.profile

Install, without interaction, according to the given TL profile file; see "PROFILES" below. To initialize from the profile and then enter the interactive menu, add --init-from-profile.

Full documentation follows.

OPTIONS

As usual, all options can be specified in any order, and with either a leading - or --. An argument value can be separated from its option by either a space or =.

The options relating to customization of the installation can also be selected in the interactive installation menus (GUI or text).

-gui [[=]module]
-no-gui

If no module is given, starts the Tcl/Tk (see below) GUI installer.

If module is given loads the given installer module. Currently the following modules are supported:

text

The text mode user interface (default on Unix systems, including Macs). Same as the -no-gui option.

tcl (or "perltk" or "wizard" or "expert" or nothing)

The Tcl/Tk user interface (default on Windows). It starts with a small number of configuration options, roughly equivalent to what the former wizard option offers, but a button Advanced takes you to a screen with roughly the same options as the former perltk interface.

The default GUI requires Tcl/Tk. This was standard on Macs, but has been removed in the latest macOS releases. It's often already installed on GNU/Linux, or can be easily installed through a distro package manager. For Windows, TeX Live provides a Tcl/Tk runtime.

-lang llcode

By default, the Tcl GUI uses the language detection built into Tcl/Tk. If that fails you can select a different language by giving this option with a language code (based on ISO 639-1). Currently supported (but not necessarily completely translated) are: English (en, default), Czech (cs), German (de), French (fr), Italian (it), Japanese (ja), Dutch (nl), Polish (pl), Brazilian Portuguese (pt_BR), Russian (ru), Slovak (sk), Slovenian (sl), Serbian (sr), Ukrainian (uk), Vietnamese (vi), simplified Chinese (zh_CN), and traditional Chinese (zh_TW).

-repository url|path

Specify the package repository to be used as the source of the installation. In short, this can be a directory name or a url using http(s), ftp, or scp. The documentation for tlmgr has the details (https://tug.org/texlive/doc/tlmgr.html#OPTIONS).

For installation, the default is to pick a mirror automatically, using https://mirror.ctan.org/systems/texlive/tlnet; the chosen mirror is then used for the entire download. You can use the special argument ctan as an abbreviation for this. (See https://ctan.org for more about CTAN and its mirrors.)

After installation is complete, you can use that installation as the repository for another installation. If you chose to install less than the full scheme containing all packages, the list of available schemes will be adjusted accordingly.

-select-repository

This option allows you to choose a particular mirror from the current list of active CTAN mirrors. This option is supported in the text and gui installer modes, and will also offer to install from local media if available, or from a repository specified on the command line. It's useful when the (default) automatic redirection does not choose a good host for you.

-all-options

Normally options not relevant to the current platform are not shown (e.g., when running on Unix, Windows-specific options are omitted). Giving this command line option allows configuring such "foreign" settings.

-custom-bin path

If you have built your own set of TeX Live binaries (e.g., because precompiled binaries were not provided by TL for your platform), this option allows you to specify the path to a directory where the binaries for the current system are present. The installation will continue as usual, but at the end all files from path are copied over to bin/custom/ under your installation directory and this bin/custom/ directory is what will be added to the path for the post-install actions. To install multiple custom binary sets, manually rename custom before doing each.

For more information on custom binaries, see https://tug.org/texlive/custom-bin.html. For general information on building TeX Live, see https://tug.org/texlive/build.html.

-debug-fakenet

Pretend we're doing a network install. This is for the sole purpose of testing the code to handle broken downloads, via moving package files aside in a tlnet mirror hierarchy.

-debug-setup-vars

Print final values of directory variables; for more debugging information on how they were set, also specify -v.

-debug-translation

In the former Perl/Tk GUI modes, this option reported any missing, or more likely untranslated, messages to standard error. Not yet implemented for the Tcl interface. Helpful for translators to see what remains to be done.

-force-platform platform

Instead of auto-detecting the current platform, use platform. Binaries for this platform must be present in bin/platform/ and they must be runnable, or installation will fail. -force-arch is a synonym.

-help, --help, -?

Display this help and exit. (This help is also on the web at https://tug.org/texlive/doc/install-tl.html). Sometimes the perldoc and/or PAGER programs on the system have problems, possibly resulting in control characters being literally output. This can't always be detected, but you can set the NOPERLDOC environment variable and perldoc will not be used.

-in-place

This is a quick-and-dirty installation option in case you already have an rsync or svn checkout of TeX Live. It will use the checkout as-is and will just do the necessary post-install. Be warned that the file tlpkg/texlive.tlpdb may be rewritten, that removal has to be done manually, and that the only realistic way to maintain this installation is to redo it from time to time. This option is not available via the installer interfaces. USE AT YOUR OWN RISK.

-init-from-profile profile_file

Similar to -profile (see "PROFILES" below), but only initializes the installation configuration from profile_file and then starts a normal interactive session. Environment variables are not ignored.

-logfile file

Write both all messages (informational, debugging, warnings) to file, in addition to standard output or standard error.

If this option is not given, the installer will create a log file in the root of the writable installation tree, for example, /usr/local/texlive/YYYY/install-tl.log for the YYYY release.

-no-cls

For the text mode installer only: do not clear the screen when entering a new menu. For debugging.

-no-continue

Quit early on installation failure of a non-core package.

By default, a few core packages are installed first; then, a failed installation of any other (non-core) package is noted, but does not stop the installation. Any such failed packages are retried, once.

If the retry also fails, by default the installer proceeds to completion anyway, with the idea that it was a transient network problem and reinstallation will succeed later. If this option is specified, and the retry fails, the installer aborts.

-no-doc-install
-no-src-install

Do not install the documentation resp. source package files, both for the immediate installation and for future updates. After installation, inclusion of the doc/src files can be re-enabled via tlmgr:

tlmgr option docfiles 1
tlmgr option srcfiles 1

If you later find that you want the doc/src files for a package that has been installed without them, you can get them like this (using the fontspec package as the example):

tlmgr install --reinstall --with-doc --with-src fontspec

The source files mentioned here are those relating to TeX packages, such as .dtx files. The sources that are compiled to make the binaries are available separately: see https://tug.org/texlive/svn/.

-no-installation

Do not perform any installation. This is for debugging the initialization and setup routines without touching the disk.

-no-interaction

Do not enter the interactive menu; immediately perform the installation after initialization and option parsing. Also omit the check for a previous installation and asking about importing previous settings.

-no-persistent-downloads
-persistent-downloads

For network installs, activating this option makes the installer try to set up a persistent connection using the LWP Perl module. This opens only one connection between your computer and the server per session and reuses it, instead of initiating a new download for each package, which typically yields a significant speed-up.

This option is turned on by default, and the installation program will fall back to using wget if this is not possible. To disable usage of LWP and persistent connections, use -no-persistent-downloads.

-no-verify-downloads

By default, if a GnuPG gpg binary is found in PATH, downloads are verified against a cryptographic signature. This option disables such verification. The full description is in the Crytographic Verification section of the tlmgr documentation, e.g., https://tug.org/texlive/doc/tlmgr.html#CRYPTOGRAPHIC-VERIFICATION

-non-admin

For Windows only: configure for the current user, not for all users.

-paper a4|letter

Set the default paper size for all TeX Live programs, as specified. The default is a4. The paper size can be set after installation with the tlmgr paper command.

-portable

Install for portable use, e.g., on a USB stick. See the instopt_portable description below for details.

Print the TeX Live identifier for the detected platform (hardware/operating system) combination to standard output, and exit. -print-arch is a synonym.

-profile profile_file

Load profile_file and do the installation with no user interaction, that is, a batch (unattended) install. Environment variables are ignored. See "PROFILES" below.

-q

Omit normal informational messages.

-scheme scheme

Schemes are the highest level of package grouping in TeX Live; the default is to use the full scheme, which includes everything. This option overrides that default. The scheme argument value may optionally have a prefix scheme-. The list of supported scheme names depends on what your package repository provides; see the interactive menu list.

-texdir dir

Specify the system installation directory; the default is /usr/local/texlive/YYYY for release YYYY. Specifying this option also causes the TEXMFLOCAL, TEXMFSYSCONFIG, and TEXMFSYSVAR directories to be set as subdirectories of dir, so they don't have to be set individually.

There is a brief summary of these directories trees at "DIRECTORY TREES" below; for details on the trees set up by default, and their intended usage, see the main TeX Live documentation at https://tug.org/texlive/doc.

-texuserdir dir

Specify the user installation directory; the default is ~/.texliveYYYY (except on Macs, where there is no leading dot). Specifying this also causes the TEXMFHOME, TEXMFCONFIG, and TEXMFVAR directories to be set as subdirectories of dir.

-texmflocal dir

Specify the TEXMFLOCAL directory; the default is /usr/local/texlive/texmf-local, that is, one level up from the main installation. This is so locally-installed packages can be easily used across releases, which is usually desirable. Specifying the -texdir option changes this, putting TEXMFLOCAL under the main tree. The -texmflocal option can be used to specify an explicit directory.

Anything installed here must follow the TeX directory structure (TDS), e.g., TEXMFHOME/tex/latex/mypkg/mypkg.sty. TDS reference: https://tug.org/tds.

-texmfhome dir

Specify the TEXMFHOME directory; the default is ~/texmf, except on Macs, where it is ~/Library/texmf. Analogously to TEXMFLOCAL, the -texuserdir option changes this default.

Also as with TEXMFLOCAL, anything installed here must follow the TDS.

-texmfsysconfig dir
-texmfsysvar dir

Specify the TEXMFSYSCONFIG and TEXMFSYSVAR system directories.

-texmfconfig dir
-texmfvar dir

Specify the TEXMFCONFIG and TEXMFVAR user directories. The defaults are ~/.texliveYYYY/texmf-{config,var}, except on Macs, where the leading dot is omitted (~/texliveYYYY/...).

-v

Include verbose debugging messages; repeat for maximum debugging: -v -v. (Further repeats are accepted but ignored.)

-version, --version

Output version information and exit. If -v is also given, the versions of the TeX Live modules used are also reported.

PROFILES

A profile file normally contains all the values needed to perform an installation. After a normal installation has finished, a profile for that exact installation is written to the file tlpkg/texlive.profile. In addition, from the text menu one can select P to save the current setup as a profile at any time. These are small text files; feel free to peruse and edit them according to your needs.

Such a profile file can be given as the argument to -profile, for example to redo the exact same installation on a different system. Alternatively, you can use a custom profile, most easily created by starting from a generated one and changing values. An empty profile file will cause the installer to use the defaults.

As mentioned above, the installer only supports selection by scheme and collections, not individual packages, so packages cannot be specified in profile files either. Use tlmgr to work at the package level.

Within a profile file, each line consists of

variable [value]

except for comment lines starting with #. The possible variable names are listed below. Values, when present, are either 0 or 1 for booleans, or strings (which must be specified without any quote characters). Leading whitespace is ignored.

If the variable selected_scheme is defined and no collection variables at all are defined, then the collections required by the specified scheme (which might change over time) are installed, without explicitly listing them. This eases maintenance of profile files. If any collections are specified in a profile, though, then the scheme is ignored and all desired collections must be given explicitly.

For example, a line

selected_scheme scheme-small

along with definitions for the installation directories (given below under "path options") suffices to install the "small" scheme with all default options. The schemes are described in the S menu in the text installer, or equivalent.

In addition to selected_scheme, here are the other variable names supported in a profile:

collection options (prefix collection-)

Collections are specified with a variable name with the prefix collection- followed by a collection name; there is no value. For instance, collection-basic. The collections are described in the C menu.

Schemes and collections (and packages) are ultimately defined by the files in the tlpkg/tlpsrc/ source directory.

path options

It is best to define all of these, even though they may not be used in a given installation, so as to avoid unintentionally getting a default value that could cause problems later.

TEXDIR
TEXMFLOCAL
TEXMFSYSCONFIG
TEXMFSYSVAR
TEXMFCONFIG
TEXMFVAR
TEXMFHOME

installer options (prefix instopt_)

instopt_adjustpath (default 0 on Unix, 1 on Windows)

Adjust PATH environment variable.

instopt_adjustrepo (default 1)

Set remote repository to a multiplexed CTAN mirror after installation; see -repository above.

instopt_letter (default 0)

Set letter size paper as the default, instead of a4.

instopt_portable (default 0)

Install for portable use, e.g., on a USB stick, without touching the host system. Specifically, this forces the user directories TEXMFHOME, TEXMFCONFIG, TEXMFVAR to be identical to the system directories TEXMFLOCAL, TEXMFSYSCONFIG, TEXMFSYSVAR, respectively (regardless of other options and environment variable.)

In addition, on Windows, it disables the desktop integration, path adjustment, and file associations actions usually performed.

instopt_write18_restricted (default 1)

Enable \write18 for a restricted set of programs.

tlpdb options (prefix tlpdbopt_)

The definitive list is given in tlpkg/TeXLive/TLConfig.pm, in the hash %TeXLive::TLConfig::TLPDBOptions, together with explanations. All items given there except for tlpdbopt_location can be specified. Here is the current list:

tlpdbopt_autobackup
tlpdbopt_backupdir
tlpdbopt_create_formats
tlpdbopt_desktop_integration
tlpdbopt_file_assocs
tlpdbopt_generate_updmap
tlpdbopt_install_docfiles
tlpdbopt_install_srcfiles
tlpdbopt_post_code
tlpdbopt_sys_bin
tlpdbopt_sys_info
tlpdbopt_sys_man
tlpdbopt_w32_multi_user

platform options (prefix binary_)

For each supported platform in TeX Live (directories under bin/), the variable binary_PLATFORM can be set with value 1. For example:

binary_x86_64-linux 1

If no binary_ settings are made, the default is whatever the current machine is running.

In releases before 2017, many profile variables had different names (not documented here; see the install-tl source). They are accepted and transformed to the names given above. When a profile is written, the names above are always used.

For more details on all of the above options, consult the TeX Live installation manual, linked from https://tug.org/texlive/doc.

ENVIRONMENT VARIABLES

For ease in scripting and debugging, install-tl looks for the following environment variables. They are not of interest for normal user installations.

NOPERLDOC

Don't try to run the --help message through perldoc.

TEXLIVE_DOWNLOADER
TL_DOWNLOAD_PROGRAM
TL_DOWNLOAD_ARGS

These override the normal choice of a download program; see the tlmgr documentation, e.g., https://tug.org/texlive/doc/tlmgr.html#ENVIRONMENT-VARIABLES.

TEXLIVE_INSTALL_ENV_NOCHECK

Omit the check for environment variables containing the string tex. People developing TeX-related software are likely to have many such variables.

TEXLIVE_INSTALL_NO_CONTEXT_CACHE

Omit creating the ConTeXt cache. This is useful for redistributors.

TEXLIVE_INSTALL_NO_DISKCHECK

If set to 1, omit free disk space check. By default, if a POSIX-compliant df program (supporting -P) is available, the installer checks for available disk space in the selected installation location, and will abort installation if there is insufficient disk space, plus a margin of 100MB. An equivalent check is made on Windows (not involving df).

TEXLIVE_INSTALL_NO_RESUME

Omit check for installing on top of a previous installation and then asking about importing previous settings.

TEXLIVE_INSTALL_NO_WELCOME

Omit printing the welcome message after successful installation, e.g., when testing.

TEXLIVE_INSTALL_PAPER

Set the default paper size for all relevant programs; must be either letter or a4. The default is a4.

TEXLIVE_INSTALL_PREFIX
TEXLIVE_INSTALL_TEXMFCONFIG
TEXLIVE_INSTALL_TEXMFVAR
TEXLIVE_INSTALL_TEXMFHOME
TEXLIVE_INSTALL_TEXMFLOCAL
TEXLIVE_INSTALL_TEXMFSYSCONFIG
TEXLIVE_INSTALL_TEXMFSYSVAR

Specify the respective directories. TEXLIVE_INSTALL_PREFIX defaults to /usr/local/texlive. All the defaults can be seen by running the installer interactively and then typing D for the directory menu.

The various command line options for specifying directories override these environment variables; since specifying both is usually accidental, a warning is given if the values are different.

DIRECTORY TREES

There are a plethora of ways to specify the plethora of directory trees used by TeX Live. By far the simplest, and recommended, approach is not to change anything. The defaults suffice for the vast majority of installations.

But, for the sake of explanation, here is a table of the trees and the command line options that change them. The first group of three are system directories, and the second group of three are user directories; the two groups are quite analogous.

+----------------+--------------------------------------+--------------+------------------+
|    tree        | default                              | group change | single change    |
+----------------+--------------------------------------+--------------+------------------+
| TEXMFLOCAL     | /usr/local/texlive/texmf-local       | --texdir     | --texmflocal     |
| TEXMFSYSVAR    | /usr/local/texlive/YYYY/texmf-var    | --texdir     | --texmfsysvar    |
| TEXMFSYSCONFIG | /usr/local/texlive/YYYY/texmf-config | --texdir     | --texmfsysconfig |
+----------------+--------------------------------------+--------------+------------------+
| TEXMFHOME      | ~/texmf                              | --texuserdir | --texmfhome      |
| TEXMFVAR       | ~/.texliveYYYY/texmf-var             | --texuserdir | --texmfvar       |
| TEXMFCONFIG    | ~/.texliveYYYY/texmf-config          | --texuserdir | --texmfconfig    |
+----------------+--------------------------------------+--------------+------------------+

In addition, as mentioned in the previous section, each tree has an environment variable TEXLIVE_INSTALL_tree which overrides the default; command line and profile settings both override environment variable settings.

The defaults vary slightly on Macs, as explained above in "OPTIONS".

For the user trees, the default value uses ~, and this is left as a literal ~ in texmf.cnf. That way, each user can have their own TEXMFHOME, etc., as intended. On the other hand, for the system trees, if ~ is used during the installation, this is assumed to simply be a typing shorthand, and the expanded home directory is written in texmf.cnf, since it doesn't make sense to have user-specific system directories.

For more on the directory trees and their intended usage, see the main TeX Live documentation at https://tug.org/texlive/doc.

BUGS

The install-tl script copies itself into the installed tree. Usually, it can be run from there, using the installed tree as the source for another installation. Occasionally, however, there may be incompatibilities in the code of the new install-tl and the infrastructure, resulting in (probably) inscrutable Perl errors. The way forward is to run install-tl out of the installer package (install-tl-unx.tar.gz or install-tl.zip) instead of the installation. Feel free to also report the issue; usually the code can be easily synced up again.

By the way, do not try to use install-tl to adjust options or installed packages in an existing installed tree. Use tlmgr instead.

AUTHORS AND COPYRIGHT

This script and its documentation were written for the TeX Live distribution (https://tug.org/texlive) and both are licensed under the GNU General Public License Version 2 or later.

$Id: install-tl 63919 2022-07-17 17:49:31Z karl $