QTransform Class
class Qt3DCore::QTransformUsed to perform transforms on meshes. More...
| Header: | #include <QTransform> |
| qmake: | QT += 3dcore |
| Since: | Qt 5.6 |
| Instantiated By: | Transform |
| Inherits: | Qt3DCore::QComponent |
This class was introduced in Qt 5.6.
Properties
|
Public Functions
| QTransform(Qt3DCore::QNode *parent = nullptr) | |
| QMatrix4x4 | matrix() const |
| QQuaternion | rotation() const |
| float | rotationX() const |
| float | rotationY() const |
| float | rotationZ() const |
| float | scale() const |
| QVector3D | scale3D() const |
| QVector3D | translation() const |
| QMatrix4x4 | worldMatrix() const |
Public Slots
| void | setMatrix(const QMatrix4x4 &matrix) |
| void | setRotation(const QQuaternion &rotation) |
| void | setRotationX(float rotationX) |
| void | setRotationY(float rotationY) |
| void | setRotationZ(float rotationZ) |
| void | setScale(float scale) |
| void | setScale3D(const QVector3D &scale) |
| void | setTranslation(const QVector3D &translation) |
Signals
| void | matrixChanged() |
| void | rotationChanged(const QQuaternion &rotation) |
| void | rotationXChanged(float rotationX) |
| void | rotationYChanged(float rotationY) |
| void | rotationZChanged(float rotationZ) |
| void | scale3DChanged(const QVector3D &scale) |
| void | scaleChanged(float scale) |
| void | translationChanged(const QVector3D &translation) |
| void | worldMatrixChanged(const QMatrix4x4 &worldMatrix) |
Static Public Members
| QQuaternion | fromAxes(const QVector3D &xAxis, const QVector3D &yAxis, const QVector3D &zAxis) |
| QQuaternion | fromAxesAndAngles(const QVector3D &axis1, float angle1, const QVector3D &axis2, float angle2) |
| QQuaternion | fromAxesAndAngles(const QVector3D &axis1, float angle1, const QVector3D &axis2, float angle2, const QVector3D &axis3, float angle3) |
| QQuaternion | fromAxisAndAngle(const QVector3D &axis, float angle) |
| QQuaternion | fromAxisAndAngle(float x, float y, float z, float angle) |
| QQuaternion | fromEulerAngles(const QVector3D &eulerAngles) |
| QQuaternion | fromEulerAngles(float pitch, float yaw, float roll) |
| QMatrix4x4 | rotateAround(const QVector3D &point, float angle, const QVector3D &axis) |
| QMatrix4x4 | rotateFromAxes(const QVector3D &xAxis, const QVector3D &yAxis, const QVector3D &zAxis) |
Detailed Description
The QTransform component is not shareable between multiple QEntity's. The transformation is held as QVector3D scale, QQuaternion rotation and QVector3D translation components. The transformations are applied to the mesh in that order. When QTransform::matrix property is set, it is decomposed to these transform components and corresponding signals are emitted.
Several helper functions are provided to set up the QTransform; fromAxisAndAngle and fromAxesAndAngles can be used to set the rotation around specific axes, fromEulerAngles can be used to set the rotation based on euler angles and rotateAround can be used to rotate the object around specific point relative to local origin.
Property Documentation
matrix : QMatrix4x4
Holds the QMatrix4x4 of the transform.
Note: When the matrix property is set, it is decomposed to translation, rotation and scale components.
Access functions:
| QMatrix4x4 | matrix() const |
| void | setMatrix(const QMatrix4x4 &matrix) |
Notifier signal:
| void | matrixChanged() |
rotation : QQuaternion
Holds the rotation of the transform as QQuaternion.
Access functions:
| QQuaternion | rotation() const |
| void | setRotation(const QQuaternion &rotation) |
Notifier signal:
| void | rotationChanged(const QQuaternion &rotation) |
rotationX : float
Holds the x rotation of the transform as Euler angle.
Access functions:
| float | rotationX() const |
| void | setRotationX(float rotationX) |
Notifier signal:
| void | rotationXChanged(float rotationX) |
rotationY : float
Holds the y rotation of the transform as Euler angle.
Access functions:
| float | rotationY() const |
| void | setRotationY(float rotationY) |
Notifier signal:
| void | rotationYChanged(float rotationY) |
rotationZ : float
Holds the z rotation of the transform as Euler angle.
Access functions:
| float | rotationZ() const |
| void | setRotationZ(float rotationZ) |
Notifier signal:
| void | rotationZChanged(float rotationZ) |
scale : float
Holds the uniform scale of the transform. If the scale has been set with setScale3D, holds the x value only.
Access functions:
| float | scale() const |
| void | setScale(float scale) |
Notifier signal:
| void | scaleChanged(float scale) |
scale3D : QVector3D
Holds the scale of the transform as QVector3D.
Access functions:
| QVector3D | scale3D() const |
| void | setScale3D(const QVector3D &scale) |
Notifier signal:
| void | scale3DChanged(const QVector3D &scale) |
translation : QVector3D
Holds the translation of the transform as QVector3D.
Access functions:
| QVector3D | translation() const |
| void | setTranslation(const QVector3D &translation) |
Notifier signal:
| void | translationChanged(const QVector3D &translation) |
worldMatrix : const QMatrix4x4
Holds the world transformation matrix for the transform. This assumes the QTransform component is being referenced by a QEntity. This makes it more convenient to identify when a QEntity part of a subtree has been transformed in the world even though its local transformation might not have changed.
This property was introduced in Qt 5.14.
Access functions:
| QMatrix4x4 | worldMatrix() const |
Notifier signal:
| void | worldMatrixChanged(const QMatrix4x4 &worldMatrix) |
Member Function Documentation
QTransform::QTransform(Qt3DCore::QNode *parent = nullptr)
Constructs a new QTransform with parent.
[static] QQuaternion QTransform::fromAxes(const QVector3D &xAxis, const QVector3D &yAxis, const QVector3D &zAxis)
Creates a QQuaterniom definining a rotation from the axes xAxis, yAxis and zAxis.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
This function was introduced in Qt 5.11.
[static] QQuaternion QTransform::fromAxesAndAngles(const QVector3D &axis1, float angle1, const QVector3D &axis2, float angle2)
Creates a QQuaternion from axis1, angle1, axis2, and angle2. Returns the resulting QQuaternion.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QQuaternion QTransform::fromAxesAndAngles(const QVector3D &axis1, float angle1, const QVector3D &axis2, float angle2, const QVector3D &axis3, float angle3)
Creates a QQuaternion from axis1, angle1, axis2, angle2, axis3, and angle3. Returns the resulting QQuaternion.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QQuaternion QTransform::fromAxisAndAngle(const QVector3D &axis, float angle)
Creates a QQuaternion from axis and angle. Returns the resulting QQuaternion.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QQuaternion QTransform::fromAxisAndAngle(float x, float y, float z, float angle)
Creates a QQuaternion from x, y, z, and angle. Returns the resulting QQuaternion.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QQuaternion QTransform::fromEulerAngles(const QVector3D &eulerAngles)
Creates a QQuaternion from eulerAngles. Returns the resulting QQuaternion.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QQuaternion QTransform::fromEulerAngles(float pitch, float yaw, float roll)
Creates a QQuaternion from pitch, yaw, and roll. Returns the resulting QQuaternion.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QMatrix4x4 QTransform::rotateAround(const QVector3D &point, float angle, const QVector3D &axis)
Creates a rotation matrix from axis and angle around point. Returns the resulting QMatrix4x4.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[static] QMatrix4x4 QTransform::rotateFromAxes(const QVector3D &xAxis, const QVector3D &yAxis, const QVector3D &zAxis)
Returns a rotation matrix defined from the axes xAxis, yAxis, zAxis.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
This function was introduced in Qt 5.11.
QMatrix4x4 QTransform::worldMatrix() const
Returns the world transformation matrix associated to the QTransform when referenced by a QEntity which may be part of a QEntity hierarchy.
Note: Getter function for property worldMatrix.
This function was introduced in Qt 5.14.