Internal API#

Here we document the odds and ends that are more helpful for creating your own interfaces or listeners but generally shouldn’t be required to interact with python-can.

BusABC#

The BusABC class, as the name suggests, provides an abstraction of a CAN bus. The bus provides a wrapper around a physical or virtual CAN Bus.

An interface specific instance of the BusABC is created by the Bus class, see Bus for the user facing API.

Extending the BusABC class#

Concrete implementations must implement the following:
  • send() to send individual messages

  • _recv_internal() to receive individual messages (see note below!)

  • set the channel_info attribute to a string describing the underlying bus and/or channel

They might implement the following:
  • flush_tx_buffer() to allow discarding any messages yet to be sent

  • shutdown() to override how the bus should shut down

  • _send_periodic_internal() to override the software based periodic sending and push it down to the kernel or hardware.

  • _apply_filters() to apply efficient filters to lower level systems like the OS kernel or hardware.

  • _detect_available_configs() to allow the interface to report which configurations are currently available for new connections.

  • state() property to allow reading and/or changing the bus state.

Note

TL;DR: Only override _recv_internal(), never recv() directly.

Previously, concrete bus classes had to override recv() directly instead of _recv_internal(), but that has changed to allow the abstract base class to handle in-software message filtering as a fallback. All internal interfaces now implement that new behaviour. Older (custom) interfaces might still be implemented like that and thus might not provide message filtering:

Concrete instances are usually created by can.Bus which takes the users configuration into account.

Bus Internals#

Several methods are not documented in the main can.Bus as they are primarily useful for library developers as opposed to library users. This is the entire ABC bus class with all internal methods:

class can.BusABC(channel, can_filters=None, **kwargs)[source]#

The CAN Bus Abstract Base Class that serves as the basis for all concrete interfaces.

This class may be used as an iterator over the received messages and as a context manager for auto-closing the bus when done using it.

Please refer to Error Handling for possible exceptions that may be thrown by certain operations on this bus.

Construct and open a CAN bus instance of the specified type.

Subclasses should call though this method with all given parameters as it handles generic tasks like applying filters.

Parameters
  • channel (Any) – The can interface identifier. Expected type is backend dependent.

  • can_filters (Optional[Sequence[Union[can.typechecking.CanFilter, can.typechecking.CanFilterExtended]]]) – See set_filters() for details.

  • kwargs (dict) – Any backend dependent configurations are passed in this dictionary

Raises
RECV_LOGGING_LEVEL = 9#

Log level for received messages

abstract __init__(channel, can_filters=None, **kwargs)[source]#

Construct and open a CAN bus instance of the specified type.

Subclasses should call though this method with all given parameters as it handles generic tasks like applying filters.

Parameters
  • channel (Any) – The can interface identifier. Expected type is backend dependent.

  • can_filters (Optional[Sequence[Union[can.typechecking.CanFilter, can.typechecking.CanFilterExtended]]]) – See set_filters() for details.

  • kwargs (dict) – Any backend dependent configurations are passed in this dictionary

Raises
__iter__()[source]#

Allow iteration on messages as they are received.

>>> for msg in bus:
...     print(msg)
Yields

Message msg objects.

Return type

Iterator[can.message.Message]

__str__()[source]#

Return str(self).

Return type

str

__weakref__#

list of weak references to the object (if defined)

_apply_filters(filters)[source]#

Hook for applying the filters to the underlying kernel or hardware if supported/implemented by the interface.

Parameters

filters (Optional[Sequence[Union[can.typechecking.CanFilter, can.typechecking.CanFilterExtended]]]) – See set_filters() for details.

Return type

None

static _detect_available_configs()[source]#

Detect all configurations/channels that this interface could currently connect with.

This might be quite time consuming.

May not to be implemented by every interface on every platform.

Returns

an iterable of dicts, each being a configuration suitable for usage in the interface’s bus constructor.

Return type

List[can.typechecking.AutoDetectedConfig]

_matches_filters(msg)[source]#

Checks whether the given message matches at least one of the current filters. See set_filters() for details on how the filters work.

This method should not be overridden.

Parameters

msg (can.message.Message) – the message to check if matching

Returns

whether the given message matches at least one filter

Return type

bool

_recv_internal(timeout)[source]#

Read a message from the bus and tell whether it was filtered. This methods may be called by recv() to read a message multiple times if the filters set by set_filters() do not match and the call has not yet timed out.

New implementations should always override this method instead of recv(), to be able to take advantage of the software based filtering provided by recv() as a fallback. This method should never be called directly.

Note

This method is not an @abstractmethod (for now) to allow older external implementations to continue using their existing recv() implementation.

Note

The second return value (whether filtering was already done) may change over time for some interfaces, like for example in the Kvaser interface. Thus it cannot be simplified to a constant value.

Parameters

timeout (float) – seconds to wait for a message, see send()

Returns

  1. a message that was read or None on timeout

  2. a bool that is True if message filtering has already been done and else False

Raises
Return type

Tuple[Optional[can.message.Message], bool]

_send_periodic_internal(msgs, period, duration=None)[source]#

Default implementation of periodic message sending using threading.

Override this method to enable a more efficient backend specific approach.

Parameters
Returns

A started task instance. Note the task can be stopped (and depending on the backend modified) by calling the stop() method.

Return type

can.broadcastmanager.CyclicSendTaskABC

channel_info = 'unknown'#

a string describing the underlying bus and/or channel

property filters: Optional[Sequence[Union[can.typechecking.CanFilter, can.typechecking.CanFilterExtended]]]#

Modify the filters of this bus. See set_filters() for details.

flush_tx_buffer()[source]#

Discard every message that may be queued in the output buffer(s).

Return type

None

recv(timeout=None)[source]#

Block waiting for a message from the Bus.

Parameters

timeout (Optional[float]) – seconds to wait for a message or None to wait indefinitely

Returns

None on timeout or a Message object.

Raises

CanOperationError – If an error occurred while reading

Return type

Optional[can.message.Message]

abstract send(msg, timeout=None)[source]#

Transmit a message to the CAN bus.

Override this method to enable the transmit path.

Parameters
  • msg (Message) – A message object.

  • timeout (Optional[float]) – If > 0, wait up to this many seconds for message to be ACK’ed or for transmit queue to be ready depending on driver implementation. If timeout is exceeded, an exception will be raised. Might not be supported by all interfaces. None blocks indefinitely.

Raises

CanOperationError – If an error occurred while sending

Return type

None

send_periodic(msgs, period, duration=None, store_task=True)[source]#

Start sending messages at a given period on this bus.

The task will be active until one of the following conditions are met:

  • the (optional) duration expires

  • the Bus instance goes out of scope

  • the Bus instance is shutdown

  • stop_all_periodic_tasks() is called

  • the task’s stop() method is called.

Parameters
  • msgs (Union[can.message.Message, Sequence[can.message.Message]]) – Message(s) to transmit

  • period (float) – Period in seconds between each message

  • duration (Optional[float]) – Approximate duration in seconds to continue sending messages. If no duration is provided, the task will continue indefinitely.

  • store_task (bool) – If True (the default) the task will be attached to this Bus instance. Disable to instead manage tasks manually.

Returns

A started task instance. Note the task can be stopped (and depending on the backend modified) by calling the task’s stop() method.

Return type

can.broadcastmanager.CyclicSendTaskABC

Note

Note the duration before the messages stop being sent may not be exactly the same as the duration specified by the user. In general the message will be sent at the given rate until at least duration seconds.

Note

For extremely long running Bus instances with many short lived tasks the default api with store_task==True may not be appropriate as the stopped tasks are still taking up memory as they are associated with the Bus instance.

set_filters(filters=None)[source]#

Apply filtering to all messages received by this Bus.

All messages that match at least one filter are returned. If filters is None or a zero length sequence, all messages are matched.

Calling without passing any filters will reset the applied filters to None.

Parameters

filters (Optional[Sequence[Union[can.typechecking.CanFilter, can.typechecking.CanFilterExtended]]]) –

A iterable of dictionaries each containing a “can_id”, a “can_mask”, and an optional “extended” key.

>>> [{"can_id": 0x11, "can_mask": 0x21, "extended": False}]

A filter matches, when <received_can_id> & can_mask == can_id & can_mask. If extended is set as well, it only matches messages where <received_is_extended> == extended. Else it matches every messages based only on the arbitration ID and mask.

Return type

None

shutdown()[source]#

Called to carry out any interface specific cleanup required in shutting down a bus.

Return type

None

property state: can.bus.BusState#

Return the current state of the hardware

stop_all_periodic_tasks(remove_tasks=True)[source]#

Stop sending any messages that were started using send_periodic().

Note

The result is undefined if a single task throws an exception while being stopped.

Parameters

remove_tasks (bool) – Stop tracking the stopped tasks.

Return type

None

About the IO module#

Handling of the different file formats is implemented in can.io. Each file/IO type is within a separate module and ideally implements both a Reader and a Writer. The reader usually extends can.io.generic.BaseIOHandler, while the writer often additionally extends can.Listener, to be able to be passed directly to a can.Notifier.

Adding support for new file formats#

This assumes that you want to add a new file format, called canstore. Ideally add both reading and writing support for the new file format, although this is not strictly required.

  1. Create a new module: can/io/canstore.py (or simply copy some existing one like can/io/csv.py)

  2. Implement a reader CanstoreReader (which often extends can.io.generic.BaseIOHandler, but does not have to). Besides from a constructor, only __iter__(self) needs to be implemented.

  3. Implement a writer CanstoreWriter (which often extends can.io.generic.BaseIOHandler and can.Listener, but does not have to). Besides from a constructor, only on_message_received(self, msg) needs to be implemented.

  4. Add a case to can.io.player.LogReader’s __new__().

  5. Document the two new classes (and possibly additional helpers) with docstrings and comments. Please mention features and limitations of the implementation.

  6. Add a short section to the bottom of doc/listeners.rst.

  7. Add tests where appropriate, for example by simply adding a test case called class TestCanstoreFileFormat(ReaderWriterTest) to test/logformats_test.py. That should already handle all of the general testing. Just follow the way the other tests in there do it.

  8. Add imports to can/__init__py and can/io/__init__py so that the new classes can be simply imported as from can import CanstoreReader, CanstoreWriter.

IO Utilities#

Contains generic base classes for file IO.

class can.io.generic.BaseIOHandler(file, mode='rt', *args, **kwargs)[source]#

A generic file handler that can be used for reading and writing.

Can be used as a context manager.

Attr file

the file-like object that is kept internally, or None if none was opened

Parameters
  • file (Optional[Union[TextIO, BinaryIO, gzip.GzipFile]]) – a path-like object to open a file, a file-like object to be used as a file or None to not use a file at all

  • mode (str) – the mode that should be used to open the file, see open(), ignored if file is None

  • args (Any) –

  • kwargs (Any) –

Return type

None

stop()[source]#

Closes the underlying file-like object and flushes it, if it was opened in write mode.

Return type

None

class can.io.generic.FileIOMessageWriter(file, mode='wt', *args, **kwargs)[source]#

A specialized base class for all writers with file descriptors.

Parameters
  • file (Union[TextIO, BinaryIO, gzip.GzipFile]) – a path-like object to open a file, a file-like object to be used as a file or None to not use a file at all

  • mode (str) – the mode that should be used to open the file, see open(), ignored if file is None

  • args (Any) –

  • kwargs (Any) –

Return type

None

file_size()[source]#

Return an estimate of the current file size in bytes.

Return type

int

class can.io.generic.MessageReader(file, mode='rt', *args, **kwargs)[source]#

The base class for all readers.

Parameters
  • file (Optional[Union[TextIO, BinaryIO, gzip.GzipFile]]) – a path-like object to open a file, a file-like object to be used as a file or None to not use a file at all

  • mode (str) – the mode that should be used to open the file, see open(), ignored if file is None

  • args (Any) –

  • kwargs (Any) –

Return type

None

class can.io.generic.MessageWriter(file, mode='rt', *args, **kwargs)[source]#

The base class for all writers.

Parameters
  • file (Optional[Union[TextIO, BinaryIO, gzip.GzipFile]]) – a path-like object to open a file, a file-like object to be used as a file or None to not use a file at all

  • mode (str) – the mode that should be used to open the file, see open(), ignored if file is None

  • args (Any) –

  • kwargs (Any) –

Return type

None

Other Utilities#

Utilities and configuration file parsing.

can.util.channel2int(channel)[source]#

Try to convert the channel to an integer.

Parameters

channel (Optional[Union[int, str]]) – Channel string (e.g. “can0”, “CAN1”) or an integer

Returns

Channel integer or None if unsuccessful

Return type

Optional[int]

can.util.deprecated_args_alias(**aliases)[source]#

Allows to rename/deprecate a function kwarg(s) and optionally have the deprecated kwarg(s) set as alias(es)

Example:

@deprecated_args_alias(oldArg="new_arg", anotherOldArg="another_new_arg")
def library_function(new_arg, another_new_arg):
    pass

@deprecated_args_alias(oldArg="new_arg", obsoleteOldArg=None)
def library_function(new_arg):
    pass
can.util.dlc2len(dlc)[source]#

Calculate the data length from DLC.

Parameters

dlc (int) – DLC (0-15)

Returns

Data length in number of bytes (0-64)

Return type

int

can.util.len2dlc(length)[source]#

Calculate the DLC from data length.

Parameters

length (int) – Length in number of bytes (0-64)

Returns

DLC (0-15)

Return type

int

can.util.load_config(path=None, config=None, context=None)[source]#

Returns a dict with configuration details which is loaded from (in this order):

  • config

  • can.rc

  • Environment variables CAN_INTERFACE, CAN_CHANNEL, CAN_BITRATE

  • Config files /etc/can.conf or ~/.can or ~/.canrc where the latter may add or replace values of the former.

Interface can be any of the strings from can.VALID_INTERFACES for example: kvaser, socketcan, pcan, usb2can, ixxat, nican, virtual.

Note

The key bustype is copied to interface if that one is missing and does never appear in the result.

Parameters
  • path (Optional[Union[TextIO, BinaryIO, gzip.GzipFile, str, os.PathLike[str]]]) – Optional path to config file.

  • config (Optional[Dict[str, Any]]) – A dict which may set the ‘interface’, and/or the ‘channel’, or neither. It may set other values that are passed through.

  • context (Optional[str]) – Extra ‘context’ pass to config sources. This can be use to section other than ‘default’ in the configuration file.

Returns

A config dictionary that should contain ‘interface’ & ‘channel’:

{
    'interface': 'python-can backend interface to use',
    'channel': 'default channel to use',
    # possibly more
}

Note None will be used if all the options are exhausted without finding a value.

All unused values are passed from config over to this.

Raises

CanInterfaceNotImplementedError if the interface name isn’t recognized

Return type

can.typechecking.BusConfig

can.util.load_environment_config(context=None)[source]#

Loads config dict from environmental variables (if set):

  • CAN_INTERFACE

  • CAN_CHANNEL

  • CAN_BITRATE

  • CAN_CONFIG

if context is supplied, “_{context}” is appended to the environment variable name we will look at. For example if context=”ABC”:

  • CAN_INTERFACE_ABC

  • CAN_CHANNEL_ABC

  • CAN_BITRATE_ABC

  • CAN_CONFIG_ABC

Parameters

context (Optional[str]) –

Return type

Dict[str, str]

can.util.load_file_config(path=None, section='default')[source]#

Loads configuration from file with following content:

[default]
interface = socketcan
channel = can0
Parameters
Return type

Dict[str, str]

can.util.set_logging_level(level_name)[source]#

Set the logging level for the “can” logger.

Parameters

level_name (str) – One of: ‘critical’, ‘error’, ‘warning’, ‘info’, ‘debug’, ‘subdebug’, or the value None (=default). Defaults to ‘debug’.

Return type

None

can.util.time_perfcounter_correlation()[source]#

Get the perf_counter value nearest to when time.time() is updated

Computed if the default timer used by time.time on this platform has a resolution higher than 10μs, otherwise the current time and perf_counter is directly returned. This was chosen as typical timer resolution on Linux/macOS is ~1μs, and the Windows platform can vary from ~500μs to 10ms.

Note this value is based on when time.time() is observed to update from Python, it is not directly returned by the operating system.

Returns

(t, performance_counter) time.time value and time.perf_counter value when the time.time is updated

Return type

Tuple[float, float]