#

Note

This documents the development version of NetworkX. Documentation for the current release can be found here.

#

Source code for networkx.generators.community

"""Generators for classes of graphs used in studying social networks."""
import itertools
import math
import networkx as nx
from networkx.utils import py_random_state

# Accommodates for both SciPy and non-SciPy implementations..
try:
    from scipy.special import zeta as _zeta

    def zeta(x, q, tolerance):
        return _zeta(x, q)


except ImportError:

    def zeta(x, q, tolerance):
        """The Hurwitz zeta function, or the Riemann zeta function of two
        arguments.

        ``x`` must be greater than one and ``q`` must be positive.

        This function repeatedly computes subsequent partial sums until
        convergence, as decided by ``tolerance``.
        """
        z = 0
        z_prev = -float("inf")
        k = 0
        while abs(z - z_prev) > tolerance:
            z_prev = z
            z += 1 / ((k + q) ** x)
            k += 1
        return z


__all__ = [
    "caveman_graph",
    "connected_caveman_graph",
    "relaxed_caveman_graph",
    "random_partition_graph",
    "planted_partition_graph",
    "gaussian_random_partition_graph",
    "ring_of_cliques",
    "windmill_graph",
    "stochastic_block_model",
    "LFR_benchmark_graph",
]


[docs]def caveman_graph(l, k): """Returns a caveman graph of `l` cliques of size `k`. Parameters ---------- l : int Number of cliques k : int Size of cliques Returns ------- G : NetworkX Graph caveman graph Notes ----- This returns an undirected graph, it can be converted to a directed graph using :func:`nx.to_directed`, or a multigraph using ``nx.MultiGraph(nx.caveman_graph(l, k))``. Only the undirected version is described in [1]_ and it is unclear which of the directed generalizations is most useful. Examples -------- >>> G = nx.caveman_graph(3, 3) See also -------- connected_caveman_graph References ---------- .. [1] Watts, D. J. 'Networks, Dynamics, and the Small-World Phenomenon.' Amer. J. Soc. 105, 493-527, 1999. """ # l disjoint cliques of size k G = nx.empty_graph(l * k) if k > 1: for start in range(0, l * k, k): edges = itertools.combinations(range(start, start + k), 2) G.add_edges_from(edges) return G
[docs]def connected_caveman_graph(l, k): """Returns a connected caveman graph of `l` cliques of size `k`. The connected caveman graph is formed by creating `n` cliques of size `k`, then a single edge in each clique is rewired to a node in an adjacent clique. Parameters ---------- l : int number of cliques k : int size of cliques (k at least 2 or NetworkXError is raised) Returns ------- G : NetworkX Graph connected caveman graph Raises ------ NetworkXError If the size of cliques `k` is smaller than 2. Notes ----- This returns an undirected graph, it can be converted to a directed graph using :func:`nx.to_directed`, or a multigraph using ``nx.MultiGraph(nx.caveman_graph(l, k))``. Only the undirected version is described in [1]_ and it is unclear which of the directed generalizations is most useful. Examples -------- >>> G = nx.connected_caveman_graph(3, 3) References ---------- .. [1] Watts, D. J. 'Networks, Dynamics, and the Small-World Phenomenon.' Amer. J. Soc. 105, 493-527, 1999. """ if k < 2: raise nx.NetworkXError( "The size of cliques in a connected caveman graph " "must be at least 2." ) G = nx.caveman_graph(l, k) for start in range(0, l * k, k): G.remove_edge(start, start + 1) G.add_edge(start, (start - 1) % (l * k)) return G
[docs]@py_random_state(3) def relaxed_caveman_graph(l, k, p, seed=None): """Returns a relaxed caveman graph. A relaxed caveman graph starts with `l` cliques of size `k`. Edges are then randomly rewired with probability `p` to link different cliques. Parameters ---------- l : int Number of groups k : int Size of cliques p : float Probabilty of rewiring each edge. seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. Returns ------- G : NetworkX Graph Relaxed Caveman Graph Raises ------ NetworkXError If p is not in [0,1] Examples -------- >>> G = nx.relaxed_caveman_graph(2, 3, 0.1, seed=42) References ---------- .. [1] Santo Fortunato, Community Detection in Graphs, Physics Reports Volume 486, Issues 3-5, February 2010, Pages 75-174. https://arxiv.org/abs/0906.0612 """ G = nx.caveman_graph(l, k) nodes = list(G) for (u, v) in G.edges(): if seed.random() < p: # rewire the edge x = seed.choice(nodes) if G.has_edge(u, x): continue G.remove_edge(u, v) G.add_edge(u, x) return G
[docs]@py_random_state(3) def random_partition_graph(sizes, p_in, p_out, seed=None, directed=False): """Returns the random partition graph with a partition of sizes. A partition graph is a graph of communities with sizes defined by s in sizes. Nodes in the same group are connected with probability p_in and nodes of different groups are connected with probability p_out. Parameters ---------- sizes : list of ints Sizes of groups p_in : float probability of edges with in groups p_out : float probability of edges between groups directed : boolean optional, default=False Whether to create a directed graph seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. Returns ------- G : NetworkX Graph or DiGraph random partition graph of size sum(gs) Raises ------ NetworkXError If p_in or p_out is not in [0,1] Examples -------- >>> G = nx.random_partition_graph([10, 10, 10], 0.25, 0.01) >>> len(G) 30 >>> partition = G.graph["partition"] >>> len(partition) 3 Notes ----- This is a generalization of the planted-l-partition described in [1]_. It allows for the creation of groups of any size. The partition is store as a graph attribute 'partition'. References ---------- .. [1] Santo Fortunato 'Community Detection in Graphs' Physical Reports Volume 486, Issue 3-5 p. 75-174. https://arxiv.org/abs/0906.0612 """ # Use geometric method for O(n+m) complexity algorithm # partition = nx.community_sets(nx.get_node_attributes(G, 'affiliation')) if not 0.0 <= p_in <= 1.0: raise nx.NetworkXError("p_in must be in [0,1]") if not 0.0 <= p_out <= 1.0: raise nx.NetworkXError("p_out must be in [0,1]") # create connection matrix num_blocks = len(sizes) p = [[p_out for s in range(num_blocks)] for r in range(num_blocks)] for r in range(num_blocks): p[r][r] = p_in return stochastic_block_model( sizes, p, nodelist=None, seed=seed, directed=directed, selfloops=False, sparse=True, )
[docs]@py_random_state(4) def planted_partition_graph(l, k, p_in, p_out, seed=None, directed=False): """Returns the planted l-partition graph. This model partitions a graph with n=l*k vertices in l groups with k vertices each. Vertices of the same group are linked with a probability p_in, and vertices of different groups are linked with probability p_out. Parameters ---------- l : int Number of groups k : int Number of vertices in each group p_in : float probability of connecting vertices within a group p_out : float probability of connected vertices between groups seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. directed : bool,optional (default=False) If True return a directed graph Returns ------- G : NetworkX Graph or DiGraph planted l-partition graph Raises ------ NetworkXError If p_in,p_out are not in [0,1] or Examples -------- >>> G = nx.planted_partition_graph(4, 3, 0.5, 0.1, seed=42) See Also -------- random_partition_model References ---------- .. [1] A. Condon, R.M. Karp, Algorithms for graph partitioning on the planted partition model, Random Struct. Algor. 18 (2001) 116-140. .. [2] Santo Fortunato 'Community Detection in Graphs' Physical Reports Volume 486, Issue 3-5 p. 75-174. https://arxiv.org/abs/0906.0612 """ return random_partition_graph([k] * l, p_in, p_out, seed=seed, directed=directed)
[docs]@py_random_state(6) def gaussian_random_partition_graph(n, s, v, p_in, p_out, directed=False, seed=None): """Generate a Gaussian random partition graph. A Gaussian random partition graph is created by creating k partitions each with a size drawn from a normal distribution with mean s and variance s/v. Nodes are connected within clusters with probability p_in and between clusters with probability p_out[1] Parameters ---------- n : int Number of nodes in the graph s : float Mean cluster size v : float Shape parameter. The variance of cluster size distribution is s/v. p_in : float Probabilty of intra cluster connection. p_out : float Probability of inter cluster connection. directed : boolean, optional default=False Whether to create a directed graph or not seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. Returns ------- G : NetworkX Graph or DiGraph gaussian random partition graph Raises ------ NetworkXError If s is > n If p_in or p_out is not in [0,1] Notes ----- Note the number of partitions is dependent on s,v and n, and that the last partition may be considerably smaller, as it is sized to simply fill out the nodes [1] See Also -------- random_partition_graph Examples -------- >>> G = nx.gaussian_random_partition_graph(100, 10, 10, 0.25, 0.1) >>> len(G) 100 References ---------- .. [1] Ulrik Brandes, Marco Gaertler, Dorothea Wagner, Experiments on Graph Clustering Algorithms, In the proceedings of the 11th Europ. Symp. Algorithms, 2003. """ if s > n: raise nx.NetworkXError("s must be <= n") assigned = 0 sizes = [] while True: size = int(seed.gauss(s, float(s) / v + 0.5)) if size < 1: # how to handle 0 or negative sizes? continue if assigned + size >= n: sizes.append(n - assigned) break assigned += size sizes.append(size) return random_partition_graph(sizes, p_in, p_out, seed=seed, directed=directed)
[docs]def ring_of_cliques(num_cliques, clique_size): """Defines a "ring of cliques" graph. A ring of cliques graph is consisting of cliques, connected through single links. Each clique is a complete graph. Parameters ---------- num_cliques : int Number of cliques clique_size : int Size of cliques Returns ------- G : NetworkX Graph ring of cliques graph Raises ------ NetworkXError If the number of cliques is lower than 2 or if the size of cliques is smaller than 2. Examples -------- >>> G = nx.ring_of_cliques(8, 4) See Also -------- connected_caveman_graph Notes ----- The `connected_caveman_graph` graph removes a link from each clique to connect it with the next clique. Instead, the `ring_of_cliques` graph simply adds the link without removing any link from the cliques. """ if num_cliques < 2: raise nx.NetworkXError("A ring of cliques must have at least " "two cliques") if clique_size < 2: raise nx.NetworkXError("The cliques must have at least two nodes") G = nx.Graph() for i in range(num_cliques): edges = itertools.combinations( range(i * clique_size, i * clique_size + clique_size), 2 ) G.add_edges_from(edges) G.add_edge( i * clique_size + 1, (i + 1) * clique_size % (num_cliques * clique_size) ) return G
[docs]def windmill_graph(n, k): """Generate a windmill graph. A windmill graph is a graph of `n` cliques each of size `k` that are all joined at one node. It can be thought of as taking a disjoint union of `n` cliques of size `k`, selecting one point from each, and contracting all of the selected points. Alternatively, one could generate `n` cliques of size `k-1` and one node that is connected to all other nodes in the graph. Parameters ---------- n : int Number of cliques k : int Size of cliques Returns ------- G : NetworkX Graph windmill graph with n cliques of size k Raises ------ NetworkXError If the number of cliques is less than two If the size of the cliques are less than two Examples -------- >>> G = nx.windmill_graph(4, 5) Notes ----- The node labeled `0` will be the node connected to all other nodes. Note that windmill graphs are usually denoted `Wd(k,n)`, so the parameters are in the opposite order as the parameters of this method. """ if n < 2: msg = "A windmill graph must have at least two cliques" raise nx.NetworkXError(msg) if k < 2: raise nx.NetworkXError("The cliques must have at least two nodes") G = nx.disjoint_union_all( itertools.chain( [nx.complete_graph(k)], (nx.complete_graph(k - 1) for _ in range(n - 1)) ) ) G.add_edges_from((0, i) for i in range(k, G.number_of_nodes())) return G
[docs]@py_random_state(3) def stochastic_block_model( sizes, p, nodelist=None, seed=None, directed=False, selfloops=False, sparse=True ): """Returns a stochastic block model graph. This model partitions the nodes in blocks of arbitrary sizes, and places edges between pairs of nodes independently, with a probability that depends on the blocks. Parameters ---------- sizes : list of ints Sizes of blocks p : list of list of floats Element (r,s) gives the density of edges going from the nodes of group r to nodes of group s. p must match the number of groups (len(sizes) == len(p)), and it must be symmetric if the graph is undirected. nodelist : list, optional The block tags are assigned according to the node identifiers in nodelist. If nodelist is None, then the ordering is the range [0,sum(sizes)-1]. seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. directed : boolean optional, default=False Whether to create a directed graph or not. selfloops : boolean optional, default=False Whether to include self-loops or not. sparse: boolean optional, default=True Use the sparse heuristic to speed up the generator. Returns ------- g : NetworkX Graph or DiGraph Stochastic block model graph of size sum(sizes) Raises ------ NetworkXError If probabilities are not in [0,1]. If the probability matrix is not square (directed case). If the probability matrix is not symmetric (undirected case). If the sizes list does not match nodelist or the probability matrix. If nodelist contains duplicate. Examples -------- >>> sizes = [75, 75, 300] >>> probs = [[0.25, 0.05, 0.02], [0.05, 0.35, 0.07], [0.02, 0.07, 0.40]] >>> g = nx.stochastic_block_model(sizes, probs, seed=0) >>> len(g) 450 >>> H = nx.quotient_graph(g, g.graph["partition"], relabel=True) >>> for v in H.nodes(data=True): ... print(round(v[1]["density"], 3)) ... 0.245 0.348 0.405 >>> for v in H.edges(data=True): ... print(round(1.0 * v[2]["weight"] / (sizes[v[0]] * sizes[v[1]]), 3)) ... 0.051 0.022 0.07 See Also -------- random_partition_graph planted_partition_graph gaussian_random_partition_graph gnp_random_graph References ---------- .. [1] Holland, P. W., Laskey, K. B., & Leinhardt, S., "Stochastic blockmodels: First steps", Social networks, 5(2), 109-137, 1983. """ # Check if dimensions match if len(sizes) != len(p): raise nx.NetworkXException("'sizes' and 'p' do not match.") # Check for probability symmetry (undirected) and shape (directed) for row in p: if len(p) != len(row): raise nx.NetworkXException("'p' must be a square matrix.") if not directed: p_transpose = [list(i) for i in zip(*p)] for i in zip(p, p_transpose): for j in zip(i[0], i[1]): if abs(j[0] - j[1]) > 1e-08: raise nx.NetworkXException("'p' must be symmetric.") # Check for probability range for row in p: for prob in row: if prob < 0 or prob > 1: raise nx.NetworkXException("Entries of 'p' not in [0,1].") # Check for nodelist consistency if nodelist is not None: if len(nodelist) != sum(sizes): raise nx.NetworkXException("'nodelist' and 'sizes' do not match.") if len(nodelist) != len(set(nodelist)): raise nx.NetworkXException("nodelist contains duplicate.") else: nodelist = range(0, sum(sizes)) # Setup the graph conditionally to the directed switch. block_range = range(len(sizes)) if directed: g = nx.DiGraph() block_iter = itertools.product(block_range, block_range) else: g = nx.Graph() block_iter = itertools.combinations_with_replacement(block_range, 2) # Split nodelist in a partition (list of sets). size_cumsum = [sum(sizes[0:x]) for x in range(0, len(sizes) + 1)] g.graph["partition"] = [ set(nodelist[size_cumsum[x] : size_cumsum[x + 1]]) for x in range(0, len(size_cumsum) - 1) ] # Setup nodes and graph name for block_id, nodes in enumerate(g.graph["partition"]): for node in nodes: g.add_node(node, block=block_id) g.name = "stochastic_block_model" # Test for edge existence parts = g.graph["partition"] for i, j in block_iter: if i == j: if directed: if selfloops: edges = itertools.product(parts[i], parts[i]) else: edges = itertools.permutations(parts[i], 2) else: edges = itertools.combinations(parts[i], 2) if selfloops: edges = itertools.chain(edges, zip(parts[i], parts[i])) for e in edges: if seed.random() < p[i][j]: g.add_edge(*e) else: edges = itertools.product(parts[i], parts[j]) if sparse: if p[i][j] == 1: # Test edges cases p_ij = 0 or 1 for e in edges: g.add_edge(*e) elif p[i][j] > 0: while True: try: logrand = math.log(seed.random()) skip = math.floor(logrand / math.log(1 - p[i][j])) # consume "skip" edges next(itertools.islice(edges, skip, skip), None) e = next(edges) g.add_edge(*e) # __safe except StopIteration: break else: for e in edges: if seed.random() < p[i][j]: g.add_edge(*e) # __safe return g
def _zipf_rv_below(gamma, xmin, threshold, seed): """Returns a random value chosen from the bounded Zipf distribution. Repeatedly draws values from the Zipf distribution until the threshold is met, then returns that value. """ result = nx.utils.zipf_rv(gamma, xmin, seed) while result > threshold: result = nx.utils.zipf_rv(gamma, xmin, seed) return result def _powerlaw_sequence(gamma, low, high, condition, length, max_iters, seed): """Returns a list of numbers obeying a constrained power law distribution. ``gamma`` and ``low`` are the parameters for the Zipf distribution. ``high`` is the maximum allowed value for values draw from the Zipf distribution. For more information, see :func:`_zipf_rv_below`. ``condition`` and ``length`` are Boolean-valued functions on lists. While generating the list, random values are drawn and appended to the list until ``length`` is satisfied by the created list. Once ``condition`` is satisfied, the sequence generated in this way is returned. ``max_iters`` indicates the number of times to generate a list satisfying ``length``. If the number of iterations exceeds this value, :exc:`~networkx.exception.ExceededMaxIterations` is raised. seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. """ for i in range(max_iters): seq = [] while not length(seq): seq.append(_zipf_rv_below(gamma, low, high, seed)) if condition(seq): return seq raise nx.ExceededMaxIterations("Could not create power law sequence") # TODO Needs documentation. def _generate_min_degree(gamma, average_degree, max_degree, tolerance, max_iters): """Returns a minimum degree from the given average degree.""" min_deg_top = max_degree min_deg_bot = 1 min_deg_mid = (min_deg_top - min_deg_bot) / 2 + min_deg_bot itrs = 0 mid_avg_deg = 0 while abs(mid_avg_deg - average_degree) > tolerance: if itrs > max_iters: raise nx.ExceededMaxIterations("Could not match average_degree") mid_avg_deg = 0 for x in range(int(min_deg_mid), max_degree + 1): mid_avg_deg += (x ** (-gamma + 1)) / zeta(gamma, min_deg_mid, tolerance) if mid_avg_deg > average_degree: min_deg_top = min_deg_mid min_deg_mid = (min_deg_top - min_deg_bot) / 2 + min_deg_bot else: min_deg_bot = min_deg_mid min_deg_mid = (min_deg_top - min_deg_bot) / 2 + min_deg_bot itrs += 1 # return int(min_deg_mid + 0.5) return round(min_deg_mid) def _generate_communities(degree_seq, community_sizes, mu, max_iters, seed): """Returns a list of sets, each of which represents a community. ``degree_seq`` is the degree sequence that must be met by the graph. ``community_sizes`` is the community size distribution that must be met by the generated list of sets. ``mu`` is a float in the interval [0, 1] indicating the fraction of intra-community edges incident to each node. ``max_iters`` is the number of times to try to add a node to a community. This must be greater than the length of ``degree_seq``, otherwise this function will always fail. If the number of iterations exceeds this value, :exc:`~networkx.exception.ExceededMaxIterations` is raised. seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. The communities returned by this are sets of integers in the set {0, ..., *n* - 1}, where *n* is the length of ``degree_seq``. """ # This assumes the nodes in the graph will be natural numbers. result = [set() for _ in community_sizes] n = len(degree_seq) free = list(range(n)) for i in range(max_iters): v = free.pop() c = seed.choice(range(len(community_sizes))) # s = int(degree_seq[v] * (1 - mu) + 0.5) s = round(degree_seq[v] * (1 - mu)) # If the community is large enough, add the node to the chosen # community. Otherwise, return it to the list of unaffiliated # nodes. if s < community_sizes[c]: result[c].add(v) else: free.append(v) # If the community is too big, remove a node from it. if len(result[c]) > community_sizes[c]: free.append(result[c].pop()) if not free: return result msg = "Could not assign communities; try increasing min_community" raise nx.ExceededMaxIterations(msg)
[docs]@py_random_state(11) def LFR_benchmark_graph( n, tau1, tau2, mu, average_degree=None, min_degree=None, max_degree=None, min_community=None, max_community=None, tol=1.0e-7, max_iters=500, seed=None, ): r"""Returns the LFR benchmark graph. This algorithm proceeds as follows: 1) Find a degree sequence with a power law distribution, and minimum value ``min_degree``, which has approximate average degree ``average_degree``. This is accomplished by either a) specifying ``min_degree`` and not ``average_degree``, b) specifying ``average_degree`` and not ``min_degree``, in which case a suitable minimum degree will be found. ``max_degree`` can also be specified, otherwise it will be set to ``n``. Each node *u* will have `\mu \mathrm{deg}(u)` edges joining it to nodes in communities other than its own and `(1 - \mu) \mathrm{deg}(u)` edges joining it to nodes in its own community. 2) Generate community sizes according to a power law distribution with exponent ``tau2``. If ``min_community`` and ``max_community`` are not specified they will be selected to be ``min_degree`` and ``max_degree``, respectively. Community sizes are generated until the sum of their sizes equals ``n``. 3) Each node will be randomly assigned a community with the condition that the community is large enough for the node's intra-community degree, `(1 - \mu) \mathrm{deg}(u)` as described in step 2. If a community grows too large, a random node will be selected for reassignment to a new community, until all nodes have been assigned a community. 4) Each node *u* then adds `(1 - \mu) \mathrm{deg}(u)` intra-community edges and `\mu \mathrm{deg}(u)` inter-community edges. Parameters ---------- n : int Number of nodes in the created graph. tau1 : float Power law exponent for the degree distribution of the created graph. This value must be strictly greater than one. tau2 : float Power law exponent for the community size distribution in the created graph. This value must be strictly greater than one. mu : float Fraction of intra-community edges incident to each node. This value must be in the interval [0, 1]. average_degree : float Desired average degree of nodes in the created graph. This value must be in the interval [0, *n*]. Exactly one of this and ``min_degree`` must be specified, otherwise a :exc:`NetworkXError` is raised. min_degree : int Minimum degree of nodes in the created graph. This value must be in the interval [0, *n*]. Exactly one of this and ``average_degree`` must be specified, otherwise a :exc:`NetworkXError` is raised. max_degree : int Maximum degree of nodes in the created graph. If not specified, this is set to ``n``, the total number of nodes in the graph. min_community : int Minimum size of communities in the graph. If not specified, this is set to ``min_degree``. max_community : int Maximum size of communities in the graph. If not specified, this is set to ``n``, the total number of nodes in the graph. tol : float Tolerance when comparing floats, specifically when comparing average degree values. max_iters : int Maximum number of iterations to try to create the community sizes, degree distribution, and community affiliations. seed : integer, random_state, or None (default) Indicator of random number generation state. See :ref:`Randomness<randomness>`. Returns ------- G : NetworkX graph The LFR benchmark graph generated according to the specified parameters. Each node in the graph has a node attribute ``'community'`` that stores the community (that is, the set of nodes) that includes it. Raises ------ NetworkXError If any of the parameters do not meet their upper and lower bounds: - ``tau1`` and ``tau2`` must be strictly greater than 1. - ``mu`` must be in [0, 1]. - ``max_degree`` must be in {1, ..., *n*}. - ``min_community`` and ``max_community`` must be in {0, ..., *n*}. If not exactly one of ``average_degree`` and ``min_degree`` is specified. If ``min_degree`` is not specified and a suitable ``min_degree`` cannot be found. ExceededMaxIterations If a valid degree sequence cannot be created within ``max_iters`` number of iterations. If a valid set of community sizes cannot be created within ``max_iters`` number of iterations. If a valid community assignment cannot be created within ``10 * n * max_iters`` number of iterations. Examples -------- Basic usage:: >>> from networkx.generators.community import LFR_benchmark_graph >>> n = 250 >>> tau1 = 3 >>> tau2 = 1.5 >>> mu = 0.1 >>> G = LFR_benchmark_graph( ... n, tau1, tau2, mu, average_degree=5, min_community=20, seed=10 ... ) Continuing the example above, you can get the communities from the node attributes of the graph:: >>> communities = {frozenset(G.nodes[v]["community"]) for v in G} Notes ----- This algorithm differs slightly from the original way it was presented in [1]. 1) Rather than connecting the graph via a configuration model then rewiring to match the intra-community and inter-community degrees, we do this wiring explicitly at the end, which should be equivalent. 2) The code posted on the author's website [2] calculates the random power law distributed variables and their average using continuous approximations, whereas we use the discrete distributions here as both degree and community size are discrete. Though the authors describe the algorithm as quite robust, testing during development indicates that a somewhat narrower parameter set is likely to successfully produce a graph. Some suggestions have been provided in the event of exceptions. References ---------- .. [1] "Benchmark graphs for testing community detection algorithms", Andrea Lancichinetti, Santo Fortunato, and Filippo Radicchi, Phys. Rev. E 78, 046110 2008 .. [2] http://santo.fortunato.googlepages.com/inthepress2 """ # Perform some basic parameter validation. if not tau1 > 1: raise nx.NetworkXError("tau1 must be greater than one") if not tau2 > 1: raise nx.NetworkXError("tau2 must be greater than one") if not 0 <= mu <= 1: raise nx.NetworkXError("mu must be in the interval [0, 1]") # Validate parameters for generating the degree sequence. if max_degree is None: max_degree = n elif not 0 < max_degree <= n: raise nx.NetworkXError("max_degree must be in the interval (0, n]") if not ((min_degree is None) ^ (average_degree is None)): raise nx.NetworkXError( "Must assign exactly one of min_degree and" " average_degree" ) if min_degree is None: min_degree = _generate_min_degree( tau1, average_degree, max_degree, tol, max_iters ) # Generate a degree sequence with a power law distribution. low, high = min_degree, max_degree def condition(seq): return sum(seq) % 2 == 0 def length(seq): return len(seq) >= n deg_seq = _powerlaw_sequence(tau1, low, high, condition, length, max_iters, seed) # Validate parameters for generating the community size sequence. if min_community is None: min_community = min(deg_seq) if max_community is None: max_community = max(deg_seq) # Generate a community size sequence with a power law distribution. # # TODO The original code incremented the number of iterations each # time a new Zipf random value was drawn from the distribution. This # differed from the way the number of iterations was incremented in # `_powerlaw_degree_sequence`, so this code was changed to match # that one. As a result, this code is allowed many more chances to # generate a valid community size sequence. low, high = min_community, max_community def condition(seq): return sum(seq) == n def length(seq): return sum(seq) >= n comms = _powerlaw_sequence(tau2, low, high, condition, length, max_iters, seed) # Generate the communities based on the given degree sequence and # community sizes. max_iters *= 10 * n communities = _generate_communities(deg_seq, comms, mu, max_iters, seed) # Finally, generate the benchmark graph based on the given # communities, joining nodes according to the intra- and # inter-community degrees. G = nx.Graph() G.add_nodes_from(range(n)) for c in communities: for u in c: while G.degree(u) < round(deg_seq[u] * (1 - mu)): v = seed.choice(list(c)) G.add_edge(u, v) while G.degree(u) < deg_seq[u]: v = seed.choice(range(n)) if v not in c: G.add_edge(u, v) G.nodes[u]["community"] = c return G