Using Sessions

Using Sessions

Introduction

The keystoneauth1.session.Session class was introduced into keystoneauth1 as an attempt to bring a unified interface to the various OpenStack clients that share common authentication and request parameters between a variety of services.

The model for using a Session and auth plugin as well as the general terms used have been heavily inspired by the requests library. However neither the Session class nor any of the authentication plugins rely directly on those concepts from the requests library so you should not expect a direct translation.

Features

  • Common client authentication

    Authentication is handled by one of a variety of authentication plugins and then this authentication information is shared between all the services that use the same Session object.

  • Security maintenance

    Security code is maintained in a single place and reused between all clients such that in the event of problems it can be fixed in a single location.

  • Standard service and version discovery

    Clients are not expected to have any knowledge of an identity token or any other form of identification credential. Service, endpoint, major version discovery, and microversion support discovery are handled by the Session and plugins. Discovery information is automatically cached in memory, so the user need not worry about excessive use of discovery metadata.

  • Safe logging of HTTP interactions

    Clients need to be able to enable logging of the HTTP interactions, but some things, such as the token or secrets, need to be ommitted.

Sessions for Users

The Session object is the contact point to your OpenStack cloud services. It stores the authentication credentials and connection information required to communicate with OpenStack such that it can be reused to communicate with many services. When creating services this Session object is passed to the client so that it may use this information.

A Session will authenticate on demand. When a request that requires authentication passes through the Session the authentication plugin will be asked for a valid token. If a valid token is available it will be used otherwise the authentication plugin may attempt to contact the authentication service and fetch a new one.

An example using keystoneclient to wrap a Session:

>>> from keystoneauth1.identity import v3
>>> from keystoneauth1 import session
>>> from keystoneclient.v3 import client

>>> auth = v3.Password(auth_url='https://my.keystone.com:5000/v3',
...                    username='myuser',
...                    password='mypassword',
...                    project_name='proj',
...                    user_domain_id='default',
...                    project_domain_id='default')
>>> sess = session.Session(auth=auth,
...                        verify='/path/to/ca.cert')
>>> ks = client.Client(session=sess)
>>> users = ks.users.list()

As other OpenStack client libraries adopt this means of operating they will be created in a similar fashion by passing the Session object to the client’s constructor.

Sharing Authentication Plugins

A Session can only contain one authentication plugin. However, there is nothing that specifically binds the authentication plugin to that Session - a new Session can be created that reuses the existing authentication plugin:

>>> new_sess = session.Session(auth=sess.auth,
                               verify='/path/to/different-cas.cert')

In this case we cannot know which Session object will be used when the plugin performs the authentication call so the command must be able to succeed with either.

Authentication plugins can also be provided on a per-request basis. This will be beneficial in a situation where a single Session is juggling multiple authentication credentials:

>>> sess.get('https://my.keystone.com:5000/v3',
             auth=my_auth_plugin)

If an auth plugin is provided via parameter then it will override any auth plugin on the Session.

Sessions for Client Developers

Sessions are intended to take away much of the hassle of dealing with authentication data and token formats. Clients should be able to specify filter parameters for selecting the endpoint and have the parsing of the catalog managed for them.

Major Version Discovery and Microversion Support

In OpenStack, the root URLs of available services are distributed to the user in an object called the Service Catalog, which is part of the token they receive. Clients are expected to use the URLs from the Service Catalog rather than have them provided. The root URL of a given service is referred to as the endpoint of the service. The URL of a specific version of a service is referred to as a versioned endpoint. REST requests for a service are made against a given versioned endpoint.

The topic of Major API versions and microversions can be confusing. As keystoneauth provides facilities for discovery of versioned endpoints associated with a Major API Version and for fetching information about the microversions that versioned endpoint supports, it is important to be aware of the distinction between the two.

Conceptually the most important thing to understand is that a Major API Version describes the URL of a discrete versioned endpoint, while a given versioned endpoint might have properties that express that it supports a range of microversions.

When a user wants to make a REST request against a service, the user expresses the Major API version and the type of service so that the appropriate versioned endpoint can be found and used. For example, a user might request version 2 of the compute service from cloud.example.com and end up with a versioned endpoint of https://compute.example.com/v2.

Each service provides a discovery document at the root of each versioned endpoint that contains information about that versioned endpoint. Each service also provides a document at the root of the unversioned endpoint that contains a list of the discovery documents for all of the available versioned endpoints. By examining these documents, it is possible to find the versioned endpoint that corresponds with the user’s desired Major API version.

Each of those documents may also indicate that the given versioned endpoint supports microversions by listing a minimum and maximum microversion that it understands. As a result of having found the versioned endpoint for the requested Major API version, the user will also know which microversions, if any, may be used in requests to that versioned endpoint.

When a client makes REST requests to the Major API version’s endpoint, the client can, optionally, on a request-by-request basis, include a header specifying that the individual request use the behavior defined by the given microversion. If a client does not request a microversion, the service will behave as if the minimum supported microversion was specified.

The overall transaction then has three parts:

  • What is the endpoint for a given Major API version of a given service?

  • What are the minimum and maximum microversions supported at that endpoint?

  • Which one of that range of microversions, if any, does the user want to use for a given request?

keystoneauth provides facilities for discovering the endpoint for a given Major API of a given service, as well as reporting the available microversion ranges that endpoint supports, if any.

More information is available in the API-WG Specs on the topics of Microversions and Consuming the Catalog.

Authentication

When making a request with a Session object you can simply pass the keyword parameter authenticated to indicate whether the argument should contain a token, by default a token is included if an authentication plugin is available:

>>> # In keystone this route is unprotected by default
>>> resp = sess.get('https://my.keystone.com:5000/v3',
                    authenticated=False)

Service Discovery

In general a client does not need to know the full URL for the server that they are communicating with, simply that it should send a request to a path belonging to the correct service.

This is controlled by the endpoint_filter parameter to a request which contains all the information an authentication plugin requires to determine the correct URL to which to send a request. When using this mode only the path for the request needs to be specified:

>>> resp = session.get('/users',
                       endpoint_filter={'service_type': 'identity',
                                        'interface': 'admin',
                                        'region_name': 'myregion',
                                        'min_version': '2.0',
                                        'max_version': '3.4',
                                        'discover_versions': False})

Note

The min_version and max_version arguments in this example indicate acceptable range for finding the endpoint for the given Major API versions. They are in the endpoint_filter, they are not requesting the call to /users be made at a specific microversion.

endpoint_filter accepts a number of arguments with which it can determine an endpoint url:

service_type

the type of service. For example identity, compute, volume or many other predefined identifiers.

interface

the network exposure the interface has. Can also be a list, in which case the first matching interface will be used. Valid values are:

  • public: An endpoint that is available to the wider internet or network.

  • internal: An endpoint that is only accessible within the private network.

  • admin: An endpoint to be used for administrative tasks.

region_name

the name of the region where the endpoint resides.

version

the minimum version, restricted to a given Major API. For instance, a version of 2.2 will match 2.2 and 2.3 but not 2.1 or 3.0. Mutually exclusive with min_version and max_version.

min_version

the minimum version of a given API, intended to be used as the lower bound of a range with max_version. See max_version for examples. Mutually exclusive with version.

max_version

the maximum version of a given API, intended to be used as the upper bound of a range with min_version. For example:

'min_version': '2.2',
'max_version': '3.3'

will match 2.2, 2.10, 3.0, and 3.3, but not 1.42, 2.1, or 3.20. Mutually exclusive with version.

Note

version, min_version and max_version are all used to help determine the endpoint for a given Major API version of a service.

discover_versions

whether or not version discovery should be run, even if not strictly necessary. It is often possible to fulfill an endpoint request purely from the catalog, meaning the version discovery API is a potentially wasted additional call. However, it’s possible that running discovery instead of inference is desired. Defaults to True.

All version arguments (version, min_version and max_version) can be given as:

  • string: '2.0'

  • int: 2

  • float: 2.0

  • tuple of ints: (2, 0)

version and max_version can also be given the string latest, which indicates that the highest available version should be used.

The endpoint filter is a simple key-value filter and can be provided with any number of arguments. It is then up to the auth plugin to correctly use the parameters it understands.

If you want to further limit your service discovery by allowing experimental APIs or disallowing deprecated APIs, you can use the allow parameter:

>>> resp = session.get('/<project-id>/volumes',
                       endpoint_filter={'service_type': 'volume',
                                        'interface': 'public',
                                        'version': 1},
                       allow={'allow_deprecated': False})

The discoverable types of endpoints that allow can recognize are:

  • allow_deprecated: Allow deprecated version endpoints.

  • allow_experimental: Allow experimental version endpoints.

  • allow_unknown: Allow endpoints with an unrecognised status.

The Session object creates a valid request by determining the URL matching the filters and appending it to the provided path. If multiple URL matches are found then any one may be chosen.

While authentication plugins will endeavour to maintain a consistent set of arguments for an endpoint_filter the concept of an authentication plugin is purposefully generic. A specific mechanism may not know how to interpret certain arguments in which case it may ignore them. For example the keystoneauth1.token_endpoint.Token plugin (which is used when you want to always use a specific endpoint and token combination) will always return the same endpoint regardless of the parameters to endpoint_filter or a custom OpenStack authentication mechanism may not have the concept of multiple interface options and choose to ignore that parameter.

There is some expectation on the user that they understand the limitations of the authentication system they are using.

Using Adapters

If the developer would prefer not to provide endpoint_filter with every API call, a keystoneauth1.adapter.Adapter can be created. The Adapter constructor takes the same arguments as endpoint_filter, as well as a Session. An Adapter behaves much like a Session, with the same REST methods, but is “mounted” on the endpoint that would be found by endpoint_filter.

adapter = keystoneauth1.adapter.Adapter(
    session=session,
    service_type='volume',
    interface='public',
    version=1)
response = adapter.get('/volumes')

As with endpoint_filter on a Session, the version, min_version and max_version parameters exist to help determine the appropriate endpoint for a Major API of a service.

Endpoint Metadata

Both keystoneauth1.adapter.Adapter and keystoneauth1.session.Session have a method for getting metadata about the endpoint found for a given service: get_endpoint_data.

On the keystoneauth1.session.Session it takes the same arguments as endpoint_filter.

On the keystoneauth1.adapter.Adapter it does not take arguments, as it returns the information for the Endpoint the Adapter is mounted on.

get_endpoint_data returns an keystoneauth1.discovery.EndpointData object. This object can be used to find information about the Endpoint, including which major api_version was found, or which interface in case of ranges, lists of input values or latest version.

It can also be used to determine the min_microversion and max_microversion supported by the API. If an API does not support microversions, the values for both will be None. It will also contain values for next_min_version and not_before if they exist for the endpoint, or None if they do not. The keystoneauth1.discovery.EndpointData object will always contain microversion related attributes regardless of whether the REST document does or not.

get_endpoint_data makes use of the same cache as the rest of the discovery process, so calling it should incur no undue expense. By default it will make at least one version discovery call so that it can fetch microversion metadata. If the user knows a service does not support microversions and is merely curious as to which major version was discovered, discover_versions can be set to False to prevent fetching microversion metadata.

Requesting a Microversion

A user who wants to specify a microversion for a given request can pass it to the microversion parameter of the request method on the keystoneauth1.session.Session object, or the keystoneauth1.adapter.Adapter object. This will cause keystoneauth to pass the appropriate header to the service informing the service of the microversion the user wants.

resp = session.get('/volumes',
                   microversion='3.15',
                   endpoint_filter={'service_type': 'volume',
                                    'interface': 'public',
                                    'min_version': '3',
                                    'max_version': 'latest'})

If the user is using a keystoneauth1.adapter.Adapter, the service_type, which is a part of the data sent in the microversion header, will be taken from the Adapter’s service_type.

adapter = keystoneauth1.adapter.Adapter(
    session=session,
    service_type='compute',
    interface='public',
    min_version='2.1')
response = adapter.get('/servers', microversion='2.38')

The user can also provide a default_microversion parameter to the Adapter constructor which will be used on all requests where an explicit microversion is not requested.

adapter = keystoneauth1.adapter.Adapter(
    session=session,
    service_type='compute',
    interface='public',
    min_version='2.1',
    default_microversion='2.38')
response = adapter.get('/servers')

If the user is using a keystoneauth1.session.Session, the service_type will be taken from the service_type in endpoint_filter.

If the service_type is the incorrect value to use for the microversion header for the service in question, the parameter microversion_service_type can be given. For instance, although keystoneauth already knows about Cinder, the service_type for Cinder is block-storage but the microversion header expects volume.

# Interactions with cinder do not need to explicitly override the
# microversion_service_type - it is only being used as an example for the
# use of the parameter.
resp = session.get('/volumes',
                   microversion='3.15',
                   microversion_service_type='volume',
                   endpoint_filter={'service_type': 'block-storage',
                                    'interface': 'public',
                                    'min_version': '3',
                                    'max_version': 'latest'})

Logging

The logging system uses standard python logging rooted on the keystoneauth namespace as would be expected. There are two possibilities of where log messages about HTTP interactions will go.

By default, all messages will go to the keystoneauth.session logger.

If the split_loggers option on the keystoneauth1.session.Session constructor is set to True, the HTTP content will be split across four subloggers to allow for fine-grained control of what is logged and how:

keystoneauth.session.request-id

Emits a log entry at the DEBUG level for every http request including information about the URL, service-type and request-id.

keystoneauth.session.request

Emits a log entry at the DEBUG level for every http request including a curl formatted string of the request.

keystoneauth.session.response

Emits a log entry at the DEBUG level for every http response received, including the status code, and the headers received.

keystoneauth.session.body

Emits a log entry at the DEBUG level containing the contents of the response body if the content-type is either text or json.

Using loggers

A full description of how to consume python logging is out of scope of this document, but a few simple examples are provided.

If you would like to configure logging to log keystoneuath at the INFO level with no DEBUG messages:

import keystoneauth1
import logging

logger = logging.getLogger('keystoneauth')
logger.addHandler(logging.StreamHandler())
logger.setLevel(logging.INFO)

If you would like to get a full HTTP debug trace including bodies:

import keystoneauth1
import logging

logger = logging.getLogger('keystoneauth')
logger.addHandler(logging.StreamHandler())
logger.setLevel(logging.DEBUG)

If you would like to get a full HTTP debug trace bug with no bodies:

import keystoneauth1
import keystoneauth1.session
import logging

logger = logging.getLogger('keystoneauth')
logger.addHandler(logging.StreamHandler())
logger.setLevel(logging.DEBUG)
body_logger = logging.getLogger('keystoneauth.session.body')
body_logger.setLevel(logging.WARN)
session = keystoneauth1.session.Session(split_loggers=True)

Finally, if you would like to log request-ids and response headers to one file, request commands, response headers and response bodies to a different file, and everything else to the console:

import keystoneauth1
import keystoneauth1.session
import logging

# Create a handler that outputs only outputs INFO level messages to stdout
stream_handler = logging.StreamHandler()
stream_handler.setLevel(logging.INFO)

# Configure the default behavior of all keystoneauth logging to log at the
# INFO level.
logger = logging.getLogger('keystoneauth')
logger.setLevel(logging.INFO)

# Emit INFO messages from all keystoneauth loggers to stdout
logger.addHandler(stream_handler)

# Create an output formatter that includes logger name and timestamp.
formatter = logging.Formatter('%(asctime)s %(name)s %(message)s')

# Create a file output for request ids and response headers
request_handler = logging.FileHandler('request.log')
request_handler.setFormatter(formatter)

# Create a file output for request commands, response headers and bodies
body_handler = logging.FileHandler('response-body.log')
body_handler.setFormatter(formatter)

# Log all HTTP interactions at the DEBUG level
session_logger = logging.getLogger('keystoneauth.session')
session_logger.setLevel(logging.DEBUG)

# Emit request ids to the request log
request_id_logger = logging.getLogger('keystoneauth.session.request-id')
request_id_logger.addHandler(request_handler)

# Emit response headers to both the request log and the body log
header_logger = logging.getLogger('keystoneauth.session.response')
header_logger.addHandler(request_handler)
header_logger.addHandler(body_handler)

# Emit request commands to the body log
request_logger = logging.getLogger('keystoneauth.session.request')
request_logger.addHandler(body_handler)

# Emit bodies only to the body log
body_logger = logging.getLogger('keystoneauth.session.body')
body_logger.addHandler(body_handler)

session = keystoneauth1.session.Session(split_loggers=True)

The above will produce messages like the following in request.log:

2017-09-19 22:10:09,466 keystoneauth.session.request-id  GET call to volumev2 for http://cloud.example.com/volume/v2/137155c35fb34172a284a3c2540c92ab/volumes/detail used request id req-f4f2058a-9308-4c4a-94e6-5ee1cd6c78bd
2017-09-19 22:10:09,751 keystoneauth.session.response    [200] Date: Tue, 19 Sep 2017 22:10:09 GMT Server: Apache/2.4.18 (Ubuntu) x-compute-request-id: req-2e9181d2-9f3e-404e-a12f-1f1566736ab3 Content-Type: application/json Content-Length: 15 x-openstack-request-id: req-2e9181d2-9f3e-404e-a12f-1f1566736ab3 Connection: close

And content like the following into response-body.log:

2017-09-19 22:10:09,490 keystoneauth.session.request     curl -g -i -X GET http://cloud.example.com/volume/v2/137155c35fb34172a284a3c2540c92ab/volumes/detail?marker=34cd00cf-bf67-4667-a900-5ce233e383d5 -H "User-Agent: os-client-config/1.28.0 shade/1.23.1 keystoneauth1/3.2.0 python-requests/2.18.4 CPython/2.7.12" -H "X-Auth-Token: {SHA1}a1d03d2a4cbee590a55f1786d452e1027d5fd781"
2017-09-19 22:10:09,751 keystoneauth.session.response    [200] Date: Tue, 19 Sep 2017 22:10:09 GMT Server: Apache/2.4.18 (Ubuntu) x-compute-request-id: req-2e9181d2-9f3e-404e-a12f-1f1566736ab3 Content-Type: application/json Content-Length: 15 x-openstack-request-id: req-2e9181d2-9f3e-404e-a12f-1f1566736ab3 Connection: close
2017-09-19 22:10:09,751 keystoneauth.session.body        {"volumes": []}

User Provided Loggers

The HTTP methods (request, get, post, put, etc) on keystoneauth1.session.Session and keystoneauth1.adapter.Adapter all support a logger parameter. A user can provide their own logger which will override the session loggers mentioned above. If a single logger is provided in this manner, request, response and body content will all be logged to that logger at the DEBUG level, and the strings REQ:, RESP: and RESP BODY: will be pre-pended as appropriate.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.