Command line usage

When you install coverage.py, a command-line script called coverage is placed on your path. To help with multi-version installs, it will also create a coverage3 alias, and a coverage-X.Y alias, depending on the version of Python you’re using. For example, when installing on Python 3.7, you will be able to use coverage, coverage3, or coverage-3.7 on the command line.

Coverage.py has a number of commands:

Help is available with the help command, or with the --help switch on any other command:

$ coverage help
$ coverage help run
$ coverage run --help

Version information for coverage.py can be displayed with coverage --version:

$ coverage --version
Coverage.py, version 6.5.0 with C extension
Documentation at https://coverage.readthedocs.io/en/6.5.0

Any command can use a configuration file by specifying it with the --rcfile=FILE command-line switch. Any option you can set on the command line can also be set in the configuration file. This can be a better way to control coverage.py since the configuration file can be checked into source control, and can provide options that other invocation techniques (like test runner plugins) may not offer. See Configuration reference for more details.

Execution: coverage run

You collect execution data by running your Python program with the run command:

$ coverage run my_program.py arg1 arg2
blah blah ..your program's output.. blah blah

Your program runs just as if it had been invoked with the Python command line. Arguments after your file name are passed to your program as usual in sys.argv. Rather than providing a file name, you can use the -m switch and specify an importable module name instead, just as you can with the Python -m switch:

$ coverage run -m packagename.modulename arg1 arg2
blah blah ..your program's output.. blah blah

Note

In most cases, the program to use here is a test runner, not your program you are trying to measure. The test runner will run your tests and coverage will measure the coverage of your code along the way.

There are many options:

$ coverage run --help
Usage: coverage run [options] <pyfile> [program options]

Run a Python program, measuring code execution.

Options:
  -a, --append          Append coverage data to .coverage, otherwise it starts
                        clean each time.
  --branch              Measure branch coverage in addition to statement
                        coverage.
  --concurrency=LIBS    Properly measure code using a concurrency library.
                        Valid values are: eventlet, gevent, greenlet,
                        multiprocessing, thread, or a comma-list of them.
  --context=LABEL       The context label to record for this coverage run.
  --data-file=OUTFILE   Write the recorded coverage data to this file.
                        Defaults to '.coverage'. [env: COVERAGE_FILE]
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  -m, --module          <pyfile> is an importable Python module, not a script
                        path, to be run as 'python -m' would run it.
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  -L, --pylib           Measure coverage even inside the Python installed
                        library, which isn't done by default.
  -p, --parallel-mode   Append the machine name, process id and random number
                        to the data file name to simplify collecting data from
                        many processes.
  --source=SRC1,SRC2,...
                        A list of directories or importable names of code to
                        measure.
  --timid               Use a simpler but slower trace method. Try this if you
                        get seemingly impossible results!
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

If you want branch coverage measurement, use the --branch flag. Otherwise only statement coverage is measured.

You can specify the code to measure with the --source, --include, and --omit switches. See Specifying source files for details of their interpretation. Remember to put options for run after “run”, but before the program invocation:

$ coverage run --source=dir1,dir2 my_program.py arg1 arg2
$ coverage run --source=dir1,dir2 -m packagename.modulename arg1 arg2

Note

Specifying --source on the coverage run command line won’t affect subsequent reporting commands like coverage xml. Use the source setting in the configuration file to apply the setting uniformly to all commands.

Coverage.py can measure multi-threaded programs by default. If you are using more other concurrency support, with the multiprocessing, greenlet, eventlet, or gevent libraries, then coverage.py can get confused. Use the --concurrency switch to properly measure programs using these libraries. Give it a value of multiprocessing, thread, greenlet, eventlet, or gevent. Values other than thread require the C extension.

You can combine multiple values for --concurrency, separated with commas. You can specify thread and also one of eventlet, gevent, or greenlet.

If you are using --concurrency=multiprocessing, you must set other options in the configuration file. Options on the command line will not be passed to the processes that multiprocessing creates. Best practice is to use the configuration file for all options.

If you are measuring coverage in a multi-process program, or across a number of machines, you’ll want the --parallel-mode switch to keep the data separate during measurement. See Combining data files: coverage combine below.

You can specify a static context for a coverage run with --context. This can be any label you want, and will be recorded with the data. See Measurement contexts for more information.

By default, coverage.py does not measure code installed with the Python interpreter, for example, the standard library. If you want to measure that code as well as your own, add the -L (or --pylib) flag.

If your coverage results seem to be overlooking code that you know has been executed, try running coverage.py again with the --timid flag. This uses a simpler but slower trace method, and might be needed in rare cases.

Coverage.py sets an environment variable, COVERAGE_RUN to indicate that your code is running under coverage measurement. The value is not relevant, and may change in the future.

These options can also be set in the [run] section of your .coveragerc file.

Warnings

During execution, coverage.py may warn you about conditions it detects that could affect the measurement process. The possible warnings include:

Couldn’t parse Python file XXX (couldnt-parse)

During reporting, a file was thought to be Python, but it couldn’t be parsed as Python.

Trace function changed, data is likely wrong: XXX (trace-changed)

Coverage measurement depends on a Python setting called the trace function. Other Python code in your product might change that function, which will disrupt coverage.py’s measurement. This warning indicates that has happened. The XXX in the message is the new trace function value, which might provide a clue to the cause.

Module XXX has no Python source (module-not-python)

You asked coverage.py to measure module XXX, but once it was imported, it turned out not to have a corresponding .py file. Without a .py file, coverage.py can’t report on missing lines.

Module XXX was never imported (module-not-imported)

You asked coverage.py to measure module XXX, but it was never imported by your program.

No data was collected (no-data-collected)

Coverage.py ran your program, but didn’t measure any lines as executed. This could be because you asked to measure only modules that never ran, or for other reasons.

To debug this problem, try using run --debug=trace to see the tracing decision made for each file.

Module XXX was previously imported, but not measured (module-not-measured)

You asked coverage.py to measure module XXX, but it had already been imported when coverage started. This meant coverage.py couldn’t monitor its execution.

Already imported a file that will be measured: XXX (already-imported)

File XXX had already been imported when coverage.py started measurement. Your setting for --source or --include indicates that you wanted to measure that file. Lines will be missing from the coverage report since the execution during import hadn’t been measured.

--include is ignored because --source is set (include-ignored)

Both --include and --source were specified while running code. Both are meant to focus measurement on a particular part of your source code, so --include is ignored in favor of --source.

Conflicting dynamic contexts (dynamic-conflict)

The [run] dynamic_context option is set in the configuration file, but something (probably a test runner plugin) is also calling the Coverage.switch_context() function to change the context. Only one of these mechanisms should be in use at a time.

Individual warnings can be disabled with the disable_warnings configuration setting. To silence “No data was collected,” add this to your .coveragerc file:

[run]
disable_warnings = no-data-collected

or pyproject.toml:

[tool.coverage.run]
disable_warnings = ['no-data-collected']

Data file

Coverage.py collects execution data in a file called “.coverage”. If need be, you can set a new file name with the COVERAGE_FILE environment variable. This can include a path to another directory.

By default, each run of your program starts with an empty data set. If you need to run your program multiple times to get complete data (for example, because you need to supply different options), you can accumulate data across runs with the --append flag on the run command.

Combining data files: coverage combine

Often test suites are run under different conditions, for example, with different versions of Python, or dependencies, or on different operating systems. In these cases, you can collect coverage data for each test run, and then combine all the separate data files into one combined file for reporting.

The combine command reads a number of separate data files, matches the data by source file name, and writes a combined data file with all of the data.

Coverage normally writes data to a filed named “.coverage”. The run --parallel-mode switch (or [run] parallel=True configuration option) tells coverage to expand the file name to include machine name, process id, and a random number so that every data file is distinct:

.coverage.Neds-MacBook-Pro.local.88335.316857
.coverage.Geometer.8044.799674

You can also define a new data file name with the [run] data_file option.

Once you have created a number of these files, you can copy them all to a single directory, and use the combine command to combine them into one .coverage data file:

$ coverage combine

You can also name directories or files on the command line:

$ coverage combine data1.dat windows_data_files/

Coverage.py will collect the data from those places and combine them. The current directory isn’t searched if you use command-line arguments. If you also want data from the current directory, name it explicitly on the command line.

When coverage.py combines data files, it looks for files named the same as the data file (defaulting to “.coverage”), with a dotted suffix. Here are some examples of data files that can be combined:

.coverage.machine1
.coverage.20120807T212300
.coverage.last_good_run.ok

An existing combined data file is ignored and re-written. If you want to use combine to accumulate results into the .coverage data file over a number of runs, use the --append switch on the combine command. This behavior was the default before version 4.2.

To combine data for a source file, coverage has to find its data in each of the data files. Different test runs may run the same source file from different locations. For example, different operating systems will use different paths for the same file, or perhaps each Python version is run from a different subdirectory. Coverage needs to know that different file paths are actually the same source file for reporting purposes.

You can tell coverage.py how different source locations relate with a [paths] section in your configuration file (see [paths]). It might be more convenient to use the [run] relative_files setting to store relative file paths (see relative_files).

If any of the data files can’t be read, coverage.py will print a warning indicating the file and the problem.

The original input data files are deleted once they’ve been combined. If you want to keep those files, use the --keep command-line option.

$ coverage combine --help
Usage: coverage combine [options] <path1> <path2> ... <pathN>

Combine data from multiple coverage files collected with 'run -p'.  The
combined results are written to a single file representing the union of the
data. The positional arguments are data files or directories containing data
files. If no paths are provided, data files in the default data file's
directory are combined.

Options:
  -a, --append          Append coverage data to .coverage, otherwise it starts
                        clean each time.
  --data-file=DATAFILE  Base name of the data files to operate on. Defaults to
                        '.coverage'. [env: COVERAGE_FILE]
  --keep                Keep original coverage files, otherwise they are
                        deleted.
  -q, --quiet           Don't print messages about what is happening.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

Erase data: coverage erase

To erase the collected data, use the erase command:

$ coverage erase --help
Usage: coverage erase [options]

Erase previously collected coverage data.

Options:
  --data-file=DATAFILE  Base name of the data files to operate on. Defaults to
                        '.coverage'. [env: COVERAGE_FILE]
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

If your configuration file indicates parallel data collection, erase will remove all of the data files.

Reporting

Coverage.py provides a few styles of reporting, with the report, html, annotate, json, lcov, and xml commands. They share a number of common options.

The command-line arguments are module or file names to report on, if you’d like to report on a subset of the data collected.

The --include and --omit flags specify lists of file name patterns. They control which files to report on, and are described in more detail in Specifying source files.

The -i or --ignore-errors switch tells coverage.py to ignore problems encountered trying to find source files to report on. This can be useful if some files are missing, or if your Python execution is tricky enough that file names are synthesized without real source files.

If you provide a --fail-under value, the total percentage covered will be compared to that value. If it is less, the command will exit with a status code of 2, indicating that the total coverage was less than your target. This can be used as part of a pass/fail condition, for example in a continuous integration server. This option isn’t available for annotate.

These options can also be set in your .coveragerc file. See Configuration: [report].

Coverage summary: coverage report

The simplest reporting is a textual summary produced with report:

$ coverage report
Name                      Stmts   Miss  Cover
---------------------------------------------
my_program.py                20      4    80%
my_module.py                 15      2    86%
my_other_module.py           56      6    89%
---------------------------------------------
TOTAL                        91     12    87%

For each module executed, the report shows the count of executable statements, the number of those statements missed, and the resulting coverage, expressed as a percentage.

$ coverage report --help
Usage: coverage report [options] [modules]

Report coverage statistics on modules.

Options:
  --contexts=REGEX1,REGEX2,...
                        Only display data from lines covered in the given
                        contexts. Accepts Python regexes, which must be
                        quoted.
  --data-file=INFILE    Read coverage data for report generation from this
                        file. Defaults to '.coverage'. [env: COVERAGE_FILE]
  --fail-under=MIN      Exit with a status of 2 if the total coverage is less
                        than MIN.
  -i, --ignore-errors   Ignore errors while reading source files.
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  --precision=N         Number of digits after the decimal point to display
                        for reported coverage percentages.
  --sort=COLUMN         Sort the report by the named column: name, stmts,
                        miss, branch, brpart, or cover. Default is name.
  -m, --show-missing    Show line numbers of statements in each module that
                        weren't executed.
  --skip-covered        Skip files with 100% coverage.
  --no-skip-covered     Disable --skip-covered.
  --skip-empty          Skip files with no code.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

The -m flag also shows the line numbers of missing statements:

$ coverage report -m
Name                      Stmts   Miss  Cover   Missing
-------------------------------------------------------
my_program.py                20      4    80%   33-35, 39
my_module.py                 15      2    86%   8, 12
my_other_module.py           56      6    89%   17-23
-------------------------------------------------------
TOTAL                        91     12    87%

If you are using branch coverage, then branch statistics will be reported in the Branch and BrPart (for Partial Branch) columns, the Missing column will detail the missed branches:

$ coverage report -m
Name                      Stmts   Miss Branch BrPart  Cover   Missing
---------------------------------------------------------------------
my_program.py                20      4     10      2    80%   33-35, 36->38, 39
my_module.py                 15      2      3      0    86%   8, 12
my_other_module.py           56      6      5      1    89%   17-23, 40->45
---------------------------------------------------------------------
TOTAL                        91     12     18      3    87%

You can restrict the report to only certain files by naming them on the command line:

$ coverage report -m my_program.py my_other_module.py
Name                      Stmts   Miss  Cover   Missing
-------------------------------------------------------
my_program.py                20      4    80%   33-35, 39
my_other_module.py           56      6    89%   17-23
-------------------------------------------------------
TOTAL                        76     10    87%

The --skip-covered switch will skip any file with 100% coverage, letting you focus on the files that still need attention. The --no-skip-covered option can be used if needed to see all the files. The --skip-empty switch will skip any file with no executable statements.

If you have recorded contexts, the --contexts option lets you choose which contexts to report on. See Context reporting for details.

The --precision option controls the number of digits displayed after the decimal point in coverage percentages, defaulting to none.

The --sort option is the name of a column to sort the report by.

Other common reporting options are described above in Reporting. These options can also be set in your .coveragerc file. See Configuration: [report].

HTML reporting: coverage html

Coverage.py can annotate your source code to show which lines were executed and which were not. The html command creates an HTML report similar to the report summary, but as an HTML file. Each module name links to the source file decorated to show the status of each line.

Here’s a sample report.

Lines are highlighted green for executed, red for missing, and gray for excluded. The counts at the top of the file are buttons to turn on and off the highlighting.

A number of keyboard shortcuts are available for navigating the report. Click the keyboard icon in the upper right to see the complete list.

$ coverage html --help
Usage: coverage html [options] [modules]

Create an HTML report of the coverage of the files.  Each file gets its own
page, with the source decorated to show executed, excluded, and missed lines.

Options:
  --contexts=REGEX1,REGEX2,...
                        Only display data from lines covered in the given
                        contexts. Accepts Python regexes, which must be
                        quoted.
  -d DIR, --directory=DIR
                        Write the output files to DIR.
  --data-file=INFILE    Read coverage data for report generation from this
                        file. Defaults to '.coverage'. [env: COVERAGE_FILE]
  --fail-under=MIN      Exit with a status of 2 if the total coverage is less
                        than MIN.
  -i, --ignore-errors   Ignore errors while reading source files.
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  --precision=N         Number of digits after the decimal point to display
                        for reported coverage percentages.
  -q, --quiet           Don't print messages about what is happening.
  --show-contexts       Show contexts for covered lines.
  --skip-covered        Skip files with 100% coverage.
  --no-skip-covered     Disable --skip-covered.
  --skip-empty          Skip files with no code.
  --title=TITLE         A text string to use as the title on the HTML.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

The title of the report can be set with the title setting in the [html] section of the configuration file, or the --title switch on the command line.

If you prefer a different style for your HTML report, you can provide your own CSS file to apply, by specifying a CSS file in the [html] section of the configuration file. See [html] extra_css for details.

The -d argument specifies an output directory, defaulting to “htmlcov”:

$ coverage html -d coverage_html

Other common reporting options are described above in Reporting.

Generating the HTML report can be time-consuming. Stored with the HTML report is a data file that is used to speed up reporting the next time. If you generate a new report into the same directory, coverage.py will skip generating unchanged pages, making the process faster.

The --skip-covered switch will skip any file with 100% coverage, letting you focus on the files that still need attention. The --skip-empty switch will skip any file with no executable statements.

The --precision option controls the number of digits displayed after the decimal point in coverage percentages, defaulting to none.

If you have recorded contexts, the --contexts option lets you choose which contexts to report on, and the --show-contexts option will annotate lines with the contexts that ran them. See Context reporting for details.

These options can also be set in your .coveragerc file. See Configuration: [html].

XML reporting: coverage xml

The xml command writes coverage data to a “coverage.xml” file in a format compatible with Cobertura.

$ coverage xml --help
Usage: coverage xml [options] [modules]

Generate an XML report of coverage results.

Options:
  --data-file=INFILE    Read coverage data for report generation from this
                        file. Defaults to '.coverage'. [env: COVERAGE_FILE]
  --fail-under=MIN      Exit with a status of 2 if the total coverage is less
                        than MIN.
  -i, --ignore-errors   Ignore errors while reading source files.
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  -o OUTFILE            Write the XML report to this file. Defaults to
                        'coverage.xml'
  -q, --quiet           Don't print messages about what is happening.
  --skip-empty          Skip files with no code.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

You can specify the name of the output file with the -o switch.

Other common reporting options are described above in Reporting.

To include complete file paths in the output file, rather than just the file name, use [include] vs [source] in your “.coveragerc” file.

For example, use this:

[run]
include =
    foo/*
    bar/*

which will result in

<class filename="bar/hello.py">
<class filename="bar/baz/hello.py">
<class filename="foo/hello.py">

in place of this:

[run]
source =
    foo
    bar

which may result in

<class filename="hello.py">
<class filename="baz/hello.py">

These options can also be set in your .coveragerc file. See Configuration: [xml].

JSON reporting: coverage json

The json command writes coverage data to a “coverage.json” file.

$ coverage json --help
Usage: coverage json [options] [modules]

Generate a JSON report of coverage results.

Options:
  --contexts=REGEX1,REGEX2,...
                        Only display data from lines covered in the given
                        contexts. Accepts Python regexes, which must be
                        quoted.
  --data-file=INFILE    Read coverage data for report generation from this
                        file. Defaults to '.coverage'. [env: COVERAGE_FILE]
  --fail-under=MIN      Exit with a status of 2 if the total coverage is less
                        than MIN.
  -i, --ignore-errors   Ignore errors while reading source files.
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  -o OUTFILE            Write the JSON report to this file. Defaults to
                        'coverage.json'
  --pretty-print        Format the JSON for human readers.
  -q, --quiet           Don't print messages about what is happening.
  --show-contexts       Show contexts for covered lines.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

You can specify the name of the output file with the -o switch. The JSON can be nicely formatted by specifying the --pretty-print switch.

Other common reporting options are described above in Reporting. These options can also be set in your .coveragerc file. See Configuration: [json].

LCOV reporting: coverage lcov

The lcov command writes coverage data to a “coverage.lcov” file.

$ coverage lcov --help
Usage: coverage lcov [options] [modules]

Generate an LCOV report of coverage results.

Options:
  --data-file=INFILE    Read coverage data for report generation from this
                        file. Defaults to '.coverage'. [env: COVERAGE_FILE]
  --fail-under=MIN      Exit with a status of 2 if the total coverage is less
                        than MIN.
  -i, --ignore-errors   Ignore errors while reading source files.
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  -o OUTFILE            Write the LCOV report to this file. Defaults to
                        'coverage.lcov'
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  -q, --quiet           Don't print messages about what is happening.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

Common reporting options are described above in Reporting. Also see Configuration: [lcov].

New in version 6.3.

Text annotation: coverage annotate

Note

The annotate command has been obsoleted by more modern reporting tools, including the html command. annotate will be removed in a future version.

The annotate command produces a text annotation of your source code. With a -d argument specifying an output directory, each Python file becomes a text file in that directory. Without -d, the files are written into the same directories as the original Python files.

Coverage status for each line of source is indicated with a character prefix:

> executed
! missing (not executed)
- excluded

For example:

  # A simple function, never called with x==1

> def h(x):
      """Silly function."""
-     if 0:  # pragma: no cover
-         pass
>     if x == 1:
!         a = 1
>     else:
>         a = 2
$ coverage annotate --help
Usage: coverage annotate [options] [modules]

Make annotated copies of the given files, marking statements that are executed
with > and statements that are missed with !.

Options:
  -d DIR, --directory=DIR
                        Write the output files to DIR.
  --data-file=INFILE    Read coverage data for report generation from this
                        file. Defaults to '.coverage'. [env: COVERAGE_FILE]
  -i, --ignore-errors   Ignore errors while reading source files.
  --include=PAT1,PAT2,...
                        Include only files whose paths match one of these
                        patterns. Accepts shell-style wildcards, which must be
                        quoted.
  --omit=PAT1,PAT2,...  Omit files whose paths match one of these patterns.
                        Accepts shell-style wildcards, which must be quoted.
  --debug=OPTS          Debug options, separated by commas. [env:
                        COVERAGE_DEBUG]
  -h, --help            Get help on this command.
  --rcfile=RCFILE       Specify configuration file. By default '.coveragerc',
                        'setup.cfg', 'tox.ini', and 'pyproject.toml' are
                        tried. [env: COVERAGE_RCFILE]

Other common reporting options are described above in Reporting.

Diagnostics: coverage debug

The debug command shows internal information to help diagnose problems. If you are reporting a bug about coverage.py, including the output of this command can often help:

$ coverage debug sys > please_attach_to_bug_report.txt

A few types of information are available:

  • config: show coverage’s configuration

  • sys: show system configuration

  • data: show a summary of the collected coverage data

  • premain: show the call stack invoking coverage

  • pybehave: show internal flags describing Python behavior

$ coverage debug --help
Usage: coverage debug <topic>

Display information about the internals of coverage.py, for diagnosing
problems. Topics are: 'data' to show a summary of the collected data; 'sys' to
show installation information; 'config' to show the configuration; 'premain'
to show what is calling coverage; 'pybehave' to show internal flags describing
Python behavior.

Options:
  --debug=OPTS     Debug options, separated by commas. [env: COVERAGE_DEBUG]
  -h, --help       Get help on this command.
  --rcfile=RCFILE  Specify configuration file. By default '.coveragerc',
                   'setup.cfg', 'tox.ini', and 'pyproject.toml' are tried.
                   [env: COVERAGE_RCFILE]

--debug

The --debug option is also available on all commands. It instructs coverage.py to log internal details of its operation, to help with diagnosing problems. It takes a comma-separated list of options, each indicating a facet of operation to log:

  • callers: annotate each debug message with a stack trace of the callers to that point.

  • config: before starting, dump all the configuration values.

  • dataio: log when reading or writing any data file.

  • dataop: log when data is added to the CoverageData object.

  • lock: log operations acquiring locks in the data layer.

  • multiproc: log the start and stop of multiprocessing processes.

  • pathmap: log the remapping of paths that happens during coverage combine due to the [paths] setting. See [paths].

  • pid: annotate all warnings and debug output with the process and thread ids.

  • plugin: print information about plugin operations.

  • process: show process creation information, and changes in the current directory.

  • pybehave: show the values of internal flags describing the behavior of the current version of Python.

  • self: annotate each debug message with the object printing the message.

  • sql: log the SQL statements used for recording data.

  • sqldata: when used with debug=sql, also log the full data being used in SQL statements.

  • sys: before starting, dump all the system and environment information, as with coverage debug sys.

  • trace: print every decision about whether to trace a file or not. For files not being traced, the reason is also given.

Debug options can also be set with the COVERAGE_DEBUG environment variable, a comma-separated list of these options, or in the [run] debug section of the .coveragerc file.

The debug output goes to stderr, unless the COVERAGE_DEBUG_FILE environment variable names a different file, which will be appended to. COVERAGE_DEBUG_FILE accepts the special names stdout and stderr to write to those destinations.