/*
 * Copyright (c) 2017
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Author: Sebastien Deronne <sebastien.deronne@gmail.com>
 */

#include "ns3/boolean.h"
#include "ns3/command-line.h"
#include "ns3/config.h"
#include "ns3/enum.h"
#include "ns3/internet-stack-helper.h"
#include "ns3/ipv4-address-helper.h"
#include "ns3/ipv4-global-routing-helper.h"
#include "ns3/log.h"
#include "ns3/mobility-helper.h"
#include "ns3/packet-sink-helper.h"
#include "ns3/ssid.h"
#include "ns3/tuple.h"
#include "ns3/udp-client-server-helper.h"
#include "ns3/uinteger.h"
#include "ns3/yans-wifi-channel.h"
#include "ns3/yans-wifi-helper.h"

// This is an example to show how to configure an IEEE 802.11 Wi-Fi
// network where the AP and the station use different 802.11 standards.
//
// It outputs the throughput for a given configuration: user can specify
// the 802.11 versions for the AP and the station as well as their rate
// adaptation algorithms. It also allows to decide whether the station,
// the AP or both has/have traffic to send.
//
// Example for an IEEE 802.11ac station sending traffic to an 802.11a AP using Ideal rate adaptation
// algorithm:
// ./ns3 run "wifi-backward-compatibility --apVersion=80211a --staVersion=80211ac --staRaa=Ideal"

using namespace ns3;

NS_LOG_COMPONENT_DEFINE("wifi-backward-compatibility");

/**
 * Convert a string (e.g., "80211a") to a pair {WifiStandard, WifiPhyBand}
 *
 * \param version The WiFi standard version.
 * \return a pair of WifiStandard, WifiPhyBand
 */
std::pair<WifiStandard, WifiPhyBand>
ConvertStringToStandardAndBand(std::string version)
{
    WifiStandard standard = WIFI_STANDARD_80211a;
    WifiPhyBand band = WIFI_PHY_BAND_5GHZ;
    if (version == "80211a")
    {
        standard = WIFI_STANDARD_80211a;
        band = WIFI_PHY_BAND_5GHZ;
    }
    else if (version == "80211b")
    {
        standard = WIFI_STANDARD_80211b;
        band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (version == "80211g")
    {
        standard = WIFI_STANDARD_80211g;
        band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (version == "80211p")
    {
        standard = WIFI_STANDARD_80211p;
        band = WIFI_PHY_BAND_5GHZ;
    }
    else if (version == "80211n_2_4GHZ")
    {
        standard = WIFI_STANDARD_80211n;
        band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (version == "80211n_5GHZ")
    {
        standard = WIFI_STANDARD_80211n;
        band = WIFI_PHY_BAND_5GHZ;
    }
    else if (version == "80211ac")
    {
        standard = WIFI_STANDARD_80211ac;
        band = WIFI_PHY_BAND_5GHZ;
    }
    else if (version == "80211ax_2_4GHZ")
    {
        standard = WIFI_STANDARD_80211ax;
        band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (version == "80211ax_5GHZ")
    {
        standard = WIFI_STANDARD_80211ax;
        band = WIFI_PHY_BAND_5GHZ;
    }
    return {standard, band};
}

int
main(int argc, char* argv[])
{
    uint32_t payloadSize = 1472; // bytes
    double simulationTime = 10;  // seconds
    std::string apVersion = "80211a";
    std::string staVersion = "80211n_5GHZ";
    std::string apRaa = "Minstrel";
    std::string staRaa = "MinstrelHt";
    bool apHasTraffic = false;
    bool staHasTraffic = true;

    CommandLine cmd(__FILE__);
    cmd.AddValue("simulationTime", "Simulation time in seconds", simulationTime);
    cmd.AddValue("apVersion",
                 "The standard version used by the AP: 80211a, 80211b, 80211g, 80211p, "
                 "80211n_2_4GHZ, 80211n_5GHZ, 80211ac, 80211ax_2_4GHZ or 80211ax_5GHZ",
                 apVersion);
    cmd.AddValue("staVersion",
                 "The standard version used by the station: 80211a, 80211b, 80211g, 80211_10MHZ, "
                 "80211_5MHZ, 80211n_2_4GHZ, 80211n_5GHZ, 80211ac, 80211ax_2_4GHZ or 80211ax_5GHZ",
                 staVersion);
    cmd.AddValue("apRaa", "Rate adaptation algorithm used by the AP", apRaa);
    cmd.AddValue("staRaa", "Rate adaptation algorithm used by the station", staRaa);
    cmd.AddValue("apHasTraffic", "Enable/disable traffic on the AP", apHasTraffic);
    cmd.AddValue("staHasTraffic", "Enable/disable traffic on the station", staHasTraffic);
    cmd.Parse(argc, argv);

    NodeContainer wifiStaNode;
    wifiStaNode.Create(1);
    NodeContainer wifiApNode;
    wifiApNode.Create(1);

    YansWifiChannelHelper channel = YansWifiChannelHelper::Default();
    YansWifiPhyHelper phy;
    phy.SetChannel(channel.Create());

    WifiMacHelper mac;
    WifiHelper wifi;
    Ssid ssid = Ssid("ns3");
    TupleValue<UintegerValue, UintegerValue, EnumValue, UintegerValue> channelValue;

    const auto& [staStandard, staBand] = ConvertStringToStandardAndBand(staVersion);
    wifi.SetStandard(staStandard);
    wifi.SetRemoteStationManager("ns3::" + staRaa + "WifiManager");

    mac.SetType("ns3::StaWifiMac", "QosSupported", BooleanValue(true), "Ssid", SsidValue(ssid));

    // Workaround needed as long as we do not fully support channel bonding
    uint16_t width = (staVersion == "80211ac" ? 20 : 0);
    channelValue.Set(WifiPhy::ChannelTuple{0, width, staBand, 0});
    phy.Set("ChannelSettings", channelValue);

    NetDeviceContainer staDevice;
    staDevice = wifi.Install(phy, mac, wifiStaNode);

    const auto& [apStandard, apBand] = ConvertStringToStandardAndBand(apVersion);
    wifi.SetStandard(apStandard);
    wifi.SetRemoteStationManager("ns3::" + apRaa + "WifiManager");

    mac.SetType("ns3::ApWifiMac", "QosSupported", BooleanValue(true), "Ssid", SsidValue(ssid));

    // Workaround needed as long as we do not fully support channel bonding
    width = (apVersion == "80211ac" ? 20 : 0);
    channelValue.Set(WifiPhy::ChannelTuple{0, width, apBand, 0});
    phy.Set("ChannelSettings", channelValue);

    NetDeviceContainer apDevice;
    apDevice = wifi.Install(phy, mac, wifiApNode);

    MobilityHelper mobility;
    Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator>();
    positionAlloc->Add(Vector(0.0, 0.0, 0.0));
    positionAlloc->Add(Vector(5.0, 0.0, 0.0));
    mobility.SetPositionAllocator(positionAlloc);
    mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
    mobility.Install(wifiApNode);
    mobility.Install(wifiStaNode);

    InternetStackHelper stack;
    stack.Install(wifiApNode);
    stack.Install(wifiStaNode);

    Ipv4AddressHelper address;
    address.SetBase("192.168.1.0", "255.255.255.0");
    Ipv4InterfaceContainer staNodeInterface;
    Ipv4InterfaceContainer apNodeInterface;

    staNodeInterface = address.Assign(staDevice);
    apNodeInterface = address.Assign(apDevice);

    UdpServerHelper apServer(9);
    ApplicationContainer apServerApp = apServer.Install(wifiApNode.Get(0));
    apServerApp.Start(Seconds(0.0));
    apServerApp.Stop(Seconds(simulationTime + 1));

    UdpServerHelper staServer(5001);
    ApplicationContainer staServerApp = staServer.Install(wifiStaNode.Get(0));
    staServerApp.Start(Seconds(0.0));
    staServerApp.Stop(Seconds(simulationTime + 1));

    if (apHasTraffic)
    {
        UdpClientHelper apClient(staNodeInterface.GetAddress(0), 5001);
        apClient.SetAttribute("MaxPackets", UintegerValue(4294967295U));
        apClient.SetAttribute("Interval", TimeValue(Time("0.00001")));   // packets/s
        apClient.SetAttribute("PacketSize", UintegerValue(payloadSize)); // bytes
        ApplicationContainer apClientApp = apClient.Install(wifiApNode.Get(0));
        apClientApp.Start(Seconds(1.0));
        apClientApp.Stop(Seconds(simulationTime + 1));
    }

    if (staHasTraffic)
    {
        UdpClientHelper staClient(apNodeInterface.GetAddress(0), 9);
        staClient.SetAttribute("MaxPackets", UintegerValue(4294967295U));
        staClient.SetAttribute("Interval", TimeValue(Time("0.00001")));   // packets/s
        staClient.SetAttribute("PacketSize", UintegerValue(payloadSize)); // bytes
        ApplicationContainer staClientApp = staClient.Install(wifiStaNode.Get(0));
        staClientApp.Start(Seconds(1.0));
        staClientApp.Stop(Seconds(simulationTime + 1));
    }

    Ipv4GlobalRoutingHelper::PopulateRoutingTables();

    Simulator::Stop(Seconds(simulationTime + 1));
    Simulator::Run();

    uint64_t rxBytes;
    double throughput;
    bool error = false;
    if (apHasTraffic)
    {
        rxBytes = payloadSize * DynamicCast<UdpServer>(staServerApp.Get(0))->GetReceived();
        throughput = (rxBytes * 8) / (simulationTime * 1000000.0); // Mbit/s
        std::cout << "AP Throughput: " << throughput << " Mbit/s" << std::endl;
        if (throughput == 0)
        {
            error = true;
        }
    }
    if (staHasTraffic)
    {
        rxBytes = payloadSize * DynamicCast<UdpServer>(apServerApp.Get(0))->GetReceived();
        throughput = (rxBytes * 8) / (simulationTime * 1000000.0); // Mbit/s
        std::cout << "STA Throughput: " << throughput << " Mbit/s" << std::endl;
        if (throughput == 0)
        {
            error = true;
        }
    }

    Simulator::Destroy();

    if (error)
    {
        NS_LOG_ERROR("No traffic received!");
        exit(1);
    }

    return 0;
}