btPoint2PointConstraint.cpp

Go to the documentation of this file.

/*
Bullet Continuous Collision Detection and Physics Library
Copyright (c) 2003-2006 Erwin Coumans  https://bulletphysics.org
 
This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, 
including commercial applications, and to alter it and redistribute it freely, 
subject to the following restrictions:
 
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
 
#include "btPoint2PointConstraint.h"
#include "BulletDynamics/Dynamics/btRigidBody.h"
#include <new>
 
btPoint2PointConstraint::btPoint2PointConstraint(btRigidBody& rbA, btRigidBody& rbB, const btVector3& pivotInA, const btVector3& pivotInB)
        : btTypedConstraint(POINT2POINT_CONSTRAINT_TYPE, rbA, rbB), m_pivotInA(pivotInA), m_pivotInB(pivotInB), m_flags(0), m_useSolveConstraintObsolete(false)
{
}
 
btPoint2PointConstraint::btPoint2PointConstraint(btRigidBody& rbA, const btVector3& pivotInA)
        : btTypedConstraint(POINT2POINT_CONSTRAINT_TYPE, rbA), m_pivotInA(pivotInA), m_pivotInB(rbA.getCenterOfMassTransform()(pivotInA)), m_flags(0), m_useSolveConstraintObsolete(false)
{
}
 
void btPoint2PointConstraint::buildJacobian()
{
        {
                m_appliedImpulse = btScalar(0.);
 
                btVector3 normal(0, 0, 0);
 
                for (int i = 0; i < 3; i++)
                {
                        normal[i] = 1;
                        new (&m_jac[i]) btJacobianEntry(
                                m_rbA.getCenterOfMassTransform().getBasis().transpose(),
                                m_rbB.getCenterOfMassTransform().getBasis().transpose(),
                                m_rbA.getCenterOfMassTransform() * m_pivotInA - m_rbA.getCenterOfMassPosition(),
                                m_rbB.getCenterOfMassTransform() * m_pivotInB - m_rbB.getCenterOfMassPosition(),
                                normal,
                                m_rbA.getInvInertiaDiagLocal(),
                                m_rbA.getInvMass(),
                                m_rbB.getInvInertiaDiagLocal(),
                                m_rbB.getInvMass());
                        normal[i] = 0;
                }
        }
}
 
void btPoint2PointConstraint::getInfo1(btConstraintInfo1* info)
{
        getInfo1NonVirtual(info);
}
 
void btPoint2PointConstraint::getInfo1NonVirtual(btConstraintInfo1* info)
{
        if (m_useSolveConstraintObsolete)
        {
                info->m_numConstraintRows = 0;
                info->nub = 0;
        }
        else
        {
                info->m_numConstraintRows = 3;
                info->nub = 3;
        }
}
 
void btPoint2PointConstraint::getInfo2(btConstraintInfo2* info)
{
        getInfo2NonVirtual(info, m_rbA.getCenterOfMassTransform(), m_rbB.getCenterOfMassTransform());
}
 
void btPoint2PointConstraint::getInfo2NonVirtual(btConstraintInfo2* info, const btTransform& body0_trans, const btTransform& body1_trans)
{
        btAssert(!m_useSolveConstraintObsolete);
 
        //retrieve matrices
 
        // anchor points in global coordinates with respect to body PORs.
 
        // set jacobian
        info->m_J1linearAxis[0] = 1;
        info->m_J1linearAxis[info->rowskip + 1] = 1;
        info->m_J1linearAxis[2 * info->rowskip + 2] = 1;
 
        btVector3 a1 = body0_trans.getBasis() * getPivotInA();
        {
                btVector3* angular0 = (btVector3*)(info->m_J1angularAxis);
                btVector3* angular1 = (btVector3*)(info->m_J1angularAxis + info->rowskip);
                btVector3* angular2 = (btVector3*)(info->m_J1angularAxis + 2 * info->rowskip);
                btVector3 a1neg = -a1;
                a1neg.getSkewSymmetricMatrix(angular0, angular1, angular2);
        }
 
        info->m_J2linearAxis[0] = -1;
        info->m_J2linearAxis[info->rowskip + 1] = -1;
        info->m_J2linearAxis[2 * info->rowskip + 2] = -1;
 
        btVector3 a2 = body1_trans.getBasis() * getPivotInB();
 
        {
                //      btVector3 a2n = -a2;
                btVector3* angular0 = (btVector3*)(info->m_J2angularAxis);
                btVector3* angular1 = (btVector3*)(info->m_J2angularAxis + info->rowskip);
                btVector3* angular2 = (btVector3*)(info->m_J2angularAxis + 2 * info->rowskip);
                a2.getSkewSymmetricMatrix(angular0, angular1, angular2);
        }
 
        // set right hand side
        btScalar currERP = (m_flags & BT_P2P_FLAGS_ERP) ? m_erp : info->erp;
        btScalar k = info->fps * currERP;
        int j;
        for (j = 0; j < 3; j++)
        {
                info->m_constraintError[j * info->rowskip] = k * (a2[j] + body1_trans.getOrigin()[j] - a1[j] - body0_trans.getOrigin()[j]);
                //printf("info->m_constraintError[%d]=%f\n",j,info->m_constraintError[j]);
        }
        if (m_flags & BT_P2P_FLAGS_CFM)
        {
                for (j = 0; j < 3; j++)
                {
                        info->cfm[j * info->rowskip] = m_cfm;
                }
        }
 
        btScalar impulseClamp = m_setting.m_impulseClamp;  //
        for (j = 0; j < 3; j++)
        {
                if (m_setting.m_impulseClamp > 0)
                {
                        info->m_lowerLimit[j * info->rowskip] = -impulseClamp;
                        info->m_upperLimit[j * info->rowskip] = impulseClamp;
                }
        }
        info->m_damping = m_setting.m_damping;
}
 
void btPoint2PointConstraint::updateRHS(btScalar timeStep)
{
        (void)timeStep;
}
 
void btPoint2PointConstraint::setParam(int num, btScalar value, int axis)
{
        if (axis != -1)
        {
                btAssertConstrParams(0);
        }
        else
        {
                switch (num)
                {
                        case BT_CONSTRAINT_ERP:
                        case BT_CONSTRAINT_STOP_ERP:
                                m_erp = value;
                                m_flags |= BT_P2P_FLAGS_ERP;
                                break;
                        case BT_CONSTRAINT_CFM:
                        case BT_CONSTRAINT_STOP_CFM:
                                m_cfm = value;
                                m_flags |= BT_P2P_FLAGS_CFM;
                                break;
                        default:
                                btAssertConstrParams(0);
                }
        }
}
 
btScalar btPoint2PointConstraint::getParam(int num, int axis) const
{
        btScalar retVal(SIMD_INFINITY);
        if (axis != -1)
        {
                btAssertConstrParams(0);
        }
        else
        {
                switch (num)
                {
                        case BT_CONSTRAINT_ERP:
                        case BT_CONSTRAINT_STOP_ERP:
                                btAssertConstrParams(m_flags & BT_P2P_FLAGS_ERP);
                                retVal = m_erp;
                                break;
                        case BT_CONSTRAINT_CFM:
                        case BT_CONSTRAINT_STOP_CFM:
                                btAssertConstrParams(m_flags & BT_P2P_FLAGS_CFM);
                                retVal = m_cfm;
                                break;
                        default:
                                btAssertConstrParams(0);
                }
        }
        return retVal;
}