ALSA project - the C library reference
Sequencer interface

General

The ALSA sequencer interface is designed to deliver the MIDI-like events between clients/ports. A typical usage is the MIDI patch-bay. A MIDI application can be connected arbitrarily from/to the other MIDI clients. The routing between clients can be changed dynamically, so the application can handle incoming or outgoing MIDI events regardless of the devices or the application connections.

The sequencer core stuff only takes care of two things: scheduling events and dispatching them to the destination at the right time. All processing of MIDI events has to be done within the clients. The event can be dispatched immediately without queueing, too. The event scheduling can be done either on a MIDI tempo queue or on a wallclock-time queue.

Client and Port

A client is created at each time snd_seq_open() is called. Later on, the attributes of client such as its name string can be changed via snd_seq_set_client_info(). There are helper functions for ease of use, e.g. snd_seq_set_client_name() and snd_seq_set_client_event_filter(). A typical code would be like below:

// create a new client
snd_seq_t *open_client()
{
snd_seq_t *handle;
int err;
err = snd_seq_open(&handle, "default", SND_SEQ_OPEN_INPUT, 0);
if (err < 0)
return NULL;
snd_seq_set_client_name(handle, "My Client");
return handle;
}
int snd_seq_set_client_name(snd_seq_t *seq, const char *name)
set client name
Definition: seqmid.c:228
int snd_seq_open(snd_seq_t **handle, const char *name, int streams, int mode)
Open the ALSA sequencer.
Definition: seq.c:974
#define SND_SEQ_OPEN_INPUT
Definition: seq.h:53
struct _snd_seq snd_seq_t
Definition: seq.h:47

You'll need to know the id number of the client eventually, for example, when accessing to a certain port (see the section Subscription). The client id can be obtained by snd_seq_client_id() function.

A client can have one or more ports to communicate between other clients. A port is corresponding to the MIDI port in the case of MIDI device, but in general it is nothing but the access point between other clients. Each port may have capability flags, which specify the read/write accessibility and subscription permissions of the port. For creation of a port, call snd_seq_create_port() with the appropriate port attribute specified in snd_seq_port_info_t record.

For creating a port for the normal use, there is a helper function snd_seq_create_simple_port(). An example with this function is like below.

// create a new port; return the port id
// port will be writable and accept the write-subscription.
int my_new_port(snd_seq_t *handle)
{
return snd_seq_create_simple_port(handle, "my port",
}
int snd_seq_create_simple_port(snd_seq_t *seq, const char *name, unsigned int caps, unsigned int type)
create a port - simple version
Definition: seqmid.c:73
#define SND_SEQ_PORT_TYPE_MIDI_GENERIC
Definition: seq.h:230
#define SND_SEQ_PORT_CAP_SUBS_WRITE
Definition: seq.h:223
#define SND_SEQ_PORT_CAP_WRITE
Definition: seq.h:215

Memory Pool

Each client owns memory pools on kernel space for each input and output events. Here, input and output mean input (read) from other clients and output (write) to others, respectively. Since memory pool of each client is independent from others, it avoids such a situation that a client eats the whole events pool and interfere other clients' response.

The all scheduled output events or input events from dispatcher are stored on these pools until delivered to other clients or extracted to user space. The size of input/output pools can be changed independently. The output pool has also a room size, which is used to wake up the thread when it falls into sleep in blocking write mode.

Note that ports on the same client share the same memory pool. If a port fills the memory pool, another can't use it any more. For avoiding this, multiple clients can be used.

For chancing the pool size and the condition, access to snd_seq_client_pool_t record. There are helper functions, snd_seq_set_client_pool_output(), snd_seq_set_client_pool_output_room() and snd_seq_set_client_pool_input(), for setting the total output-pool size, the output-room size and the input-pool size, respectively.

Subscription

One of the new features in ALSA sequencer system is subscription of ports. In general, subscription is a connection between two sequencer ports. Even though an event can be delivered to a port without subscription using an explicit destination address, the subscription mechanism provides us more abstraction.

Suppose a MIDI input device which sends events from a keyboard. The port associated with this device has READ capability - which means this port is readable from other ports. If a user program wants to capture events from keyboard and store them as MIDI stream, this program must subscribe itself to the MIDI port for read. Then, a connection from MIDI input port to this program is established. From this time, events from keyboard are automatically sent to this program. Timestamps will be updated according to the subscribed queue.

MIDI input port (keyboard)
|
V
ALSA sequencer - update timestamp
|
V
application port

There is another subscription type for opposite direction: Suppose a MIDI sequencer program which sends events to a MIDI output device. In ALSA system, MIDI device is not opened until the associated MIDI port is accessed. Thus, in order to activate MIDI device, we have to subscribe to MIDI port for write. After this connection is established, events will be properly sent to MIDI output device.

application port
|
V
ALSA sequencer - events are scheduled
|
V
MIDI output port (WaveTable etc.)

From the viewpoint of subscription, the examples above are special cases. Basically, subscription means the connection between two arbitrary ports. For example, imagine a filter application which modifies the MIDI events like program, velocity or chorus effects. This application can accept arbitrary MIDI input and send to arbitrary port, just like a Unix pipe application using stdin and stdout files. We can even connect several filter applications which work individually in order to process the MIDI events. Subscription can be used for this purpose. The connection between ports can be done also by the "third" client. Thus, filter applications have to manage only input and output events regardless of receiver/sender addresses.

sequencer port #1
|
V
ALSA sequencer (scheduled or real-time)
|
V
sequencer port #2

For the detail about subscription, see the section More inside the subscription.

Sequencer Events

Messaging between clients is performed by sending events from one client to another. These events contain high-level MIDI oriented messages or sequencer specific messages.

All the sequencer events are stored in a sequencer event record, snd_seq_event_t type. Application can send and receive these event records to/from other clients via sequencer. An event has several storage types according to its usage. For example, a SYSEX message is stored on the variable length event, and a large synth sample data is delivered using a user-space data pointer.

Structure of an event

An event consists of the following items:

  • The type of the event
  • Event flags. It describes various conditions:
    • time stamp; "real time" / "song ticks"
    • time mode; "absolute" / "relative to current time"
  • Timestamp of the event.
  • Scheduling queue id.
  • Source address of the event, given by the combination of client id and port id numbers.
  • Destination address of the event.
  • The actual event data. (up to 12 bytes)

The actual record is shown in snd_seq_event_t. The type field contains the type of the event (1 byte). The flags field consists of bit flags which describe several conditions of the event (1 byte). It includes the time-stamp mode, data storage type, and scheduling priority. The tag field is an arbitrary tag. This tag can used for removing a distinct event from the event queue via snd_seq_remove_events(). The queue field is the queue id for scheduling. The source and dest fields are source and destination addresses. The data field is a union of event data.

Scheduling queue

An event can be delivered either on scheduled or direct dispatch mode. On the scheduling mode, an event is once stored on the priority queue and delivered later (or even immediately) to the destination, whereas on the direct dispatch mode, an event is passed to the destination without any queue.

For a scheduled delivery, a queue to process the event must exist. Usually, a client creates its own queue by snd_seq_alloc_queue() function. Alternatively, a queue may be shared among several clients. For scheduling an event on the specified queue, a client needs to fill queue field with the preferred queue id.

Meanwhile, for dispatching an event directly, just use SND_SEQ_QUEUE_DIRECT as the target queue id. A macro snd_seq_ev_set_direct() is provided for ease and compatibility.

Note that scheduling at the current or earlier time is different from the direct dispatch mode even though the event is delivered immediately. On the former scheme, an event is once stored on priority queue, then delivered actually. Thus, it acquires a space from memory pool. On the other hand, the latter is passed without using memory pool. Although the direct dispatched event needs less memory, it means also that the event cannot be resent if the destination is unable to receive it momentarily.

Time stamp

The timestamp of the event can either specified in real time or in song ticks. The former means the wallclock time while the latter corresponds to the MIDI ticks. Which format is used is determined by the event flags.

The resolution of real-time value is in nano second. Since 64 bit length is required for the actual time calculation, it is represented by a structure of pair of second and nano second defined as snd_seq_real_time_t type. The song tick is defined simply as a 32 bit integer, defined as snd_seq_tick_time_t type. The time stored in an event record is a union of these two different time values.

Note that the time format used for real time events is very similar to timeval struct used for Unix system time. The absurd resolution of the timestamps allows us to perform very accurate conversions between songposition and real time. Round-off errors can be neglected.

If a timestamp with a relative timestamp is delivered to ALSA, the specified timestamp will be used as an offset to the current time of the queue the event is sent into. An absolute timestamp is on the contrary the time counted from the moment when the queue started.

An client that relies on these relative timestamps is the MIDI input port. As each sequencer queue has it's own clock the only way to deliver events at the right time is by using the relative timestamp format. When the event arrives at the queue it is normalized to absolute format.

The timestamp format is specified in the flag bitfield masked by SND_SEQ_TIME_STAMP_MASK. To schedule the event in a real-time queue or in a tick queue, macros snd_seq_ev_schedule_real() and snd_seq_ev_schedule_tick() are provided, respectively.

Source and destination addresses

To identify the source and destination of an event, the addressing field contains a combination of client id and port id numbers, defined as snd_seq_addr_t type. When an event is passed to sequencer from a client, sequencer fills source.client field with the sender's id automatically. It is the responsibility of sender client to fill the port id of source.port and both client and port of dest field.

If an existing address is set to the destination, the event is simply delivered to it. When SND_SEQ_ADDRESS_SUBSCRIBERS is set to the destination client id, the event is delivered to all the clients connected to the source port.

A sequencer core has two pre-defined system ports on the system client SND_SEQ_CLIENT_SYSTEM: SND_SEQ_PORT_SYSTEM_TIMER and SND_SEQ_PORT_SYSTEM_ANNOUNCE. The SND_SEQ_PORT_SYSTEM_TIMER is the system timer port, and SND_SEQ_PORT_SYSTEM_ANNOUNCE is the system announce port. In order to control a queue from a client, client should send a queue-control event like start, stop and continue queue, change tempo, etc. to the system timer port. Then the sequencer system handles the queue according to the received event. This port supports subscription. The received timer events are broadcasted to all subscribed clients.

The latter port does not receive messages but supports subscription. When each client or port is attached, detached or modified, an announcement is sent to subscribers from this port.

Data storage type

Some events like SYSEX message, however, need larger data space than the standard data. For such events, ALSA sequencer provides several different data storage types. The data type is specified in the flag bits masked by SND_SEQ_EVENT_LENGTH_MASK. The following data types are available:

Fixed size data
Normal events stores their parameters on data field (12 byte). The flag-bit type is SND_SEQ_EVENT_LENGTH_FIXED. A macro snd_seq_ev_set_fixed() is provided to set this type.
Variable length data
SYSEX or a returned error use this type. The actual data is stored on an extra allocated space. On sequencer kernel, the whole extra-data is duplicated, so that the event can be scheduled on queue. The data contains only the length and the pointer of extra-data. The flag-bit type is SND_SEQ_EVENT_LENGTH_VARIABLE. A macro snd_seq_ev_set_variable() is provided to set this type.
User-space data
This type refers also an extra data space like variable length data, but the extra-data is not duplicated but but referred as a user-space data on kernel, so that it reduces the time and resource for transferring large bulk of data like synth sample wave. This data type, however, can be used only for direct dispatch mode, and supposed to be used only for a special purpose like a bulk data transfer. The data length and pointer are stored also in data.ext field as well as variable length data. The flag-bit type is SND_SEQ_EVENT_LENGTH_VARUSR. A macro snd_seq_ev_set_varusr() is provided to set this type.

Scheduling priority

There are two priorities for scheduling:

Normal priority
If an event with the same scheduling time is already present on the queue, the new event is appended to the older.
High priority
If an event with the same scheduling time is already present on the queue, the new event is inserted before others.

The scheduling priority is set in the flag bitfeld masked by SND_SEQ_PRIORITY_MASK. A macro snd_seq_ev_set_priority() is provided to set the mode type.

Event Queues

Creation of a queue

Creating a queue is done usually by calling snd_seq_alloc_queue. You can create a queue with a certain name by snd_seq_alloc_named_queue(), too.

// create a queue and return its id
int my_queue(snd_seq_t *handle)
{
return snd_seq_alloc_named_queue(handle, "my queue");
}
int snd_seq_alloc_named_queue(snd_seq_t *seq, const char *name)
allocate a queue with the specified name
Definition: seq.c:3201

These functions are the wrapper to the function snd_seq_create_queue(). For releasing the allocated queue, call snd_seq_free_queue() with the obtained queue id.

Once when a queue is created, the two queues are associated to that queue record in fact: one is the realtime queue and another is the tick queue. These two queues are bound together to work synchronously. Hence, when you schedule an event, you have to choose which queue type is used as described in the section Time stamp.

Setting queue tempo

The tempo (or the speed) of the scheduling queue is variable. In the case of tick queue, the tempo is controlled in the manner of MIDI. There are two parameters to define the actual tempo, PPQ (pulse per quarter note) and MIDI tempo. The former defines the base resolution of the ticks, while the latter defines the beat tempo in microseconds. As default, 96 PPQ and 120 BPM are used, respectively. That is, the tempo is set to 500000 (= 60 * 1000000 / 120). Note that PPQ cannot be changed while the queue is running. It must be set before the queue is started.

On the other hand, in the case of realtime queue, the time resolution is fixed to nanoseconds. There is, however, a parameter to change the speed of this queue, called skew. You can make the queue faster or slower by setting the skew value bigger or smaller. In the API, the skew is defined by two values, the skew base and the skew value. The actual skew is the fraction of them, value/base. As default, the skew base is set to 16bit (0x10000) and the skew value is the identical, so that the queue is processed as well as in the real world.

When the tempo of realtime queue is changed, the tempo of the associated tick queue is changed together, too. That's the reason why two queues are created always. This feature can be used to synchronize the event queue with the external synchronization source like SMPTE. In such a case, the realtime queue is skewed to match with the external source, so that both the realtime timestamp and the MIDI timestamp are synchronized.

For setting these tempo parameters, use snd_seq_queue_tempo_t record. For example, to set the tempo of the queue q to 48 PPQ, 60 BPM,

void set_tempo(snd_seq_t *handle, int queue)
{
snd_seq_queue_tempo_set_tempo(tempo, 1000000); // 60 BPM
snd_seq_queue_tempo_set_ppq(tempo, 48); // 48 PPQ
snd_seq_set_queue_tempo(handle, queue, tempo);
}
void snd_seq_queue_tempo_set_tempo(snd_seq_queue_tempo_t *info, unsigned int tempo)
Set the tempo of a queue_status container.
Definition: seq.c:3581
void snd_seq_queue_tempo_set_ppq(snd_seq_queue_tempo_t *info, int ppq)
Set the ppq of a queue_status container.
Definition: seq.c:3594
int snd_seq_set_queue_tempo(snd_seq_t *handle, int q, snd_seq_queue_tempo_t *tempo)
set the tempo of the queue
Definition: seq.c:3655
#define snd_seq_queue_tempo_alloca(ptr)
Definition: seq.h:461
struct _snd_seq_queue_tempo snd_seq_queue_tempo_t
Definition: seq.h:402

For changing the (running) queue's tempo on the fly, you can either set the tempo via snd_seq_set_queue_tempo() or send a MIDI tempo event to the system timer port. For example,

int change_tempo(snd_seq_t *handle, int q, unsigned int tempo)
{
ev.source.client = my_client_id;
ev.source.port = my_port_id;
ev.queue = SND_SEQ_QUEUE_DIRECT; // no scheduling
ev.data.queue.queue = q; // affected queue id
ev.data.queue.value = tempo; // new tempo in microsec.
return snd_seq_event_output(handle, &ev);
}
int snd_seq_event_output(snd_seq_t *handle, snd_seq_event_t *ev)
output an event
Definition: seq.c:3906
#define snd_seq_ev_clear(ev)
initialize event record
Definition: seqmid.h:48
#define SND_SEQ_PORT_SYSTEM_TIMER
Definition: seq.h:210
#define SND_SEQ_QUEUE_DIRECT
Definition: seq.h:407
#define SND_SEQ_CLIENT_SYSTEM
Definition: seq.h:74
unsigned char port
Definition: seq_event.h:180
unsigned char client
Definition: seq_event.h:179
Definition: seq_event.h:296
unsigned char queue
Definition: seq_event.h:301
snd_seq_addr_t source
Definition: seq_event.h:304
union snd_seq_event_t::@4 data
snd_seq_addr_t dest
Definition: seq_event.h:305

There is a helper function to do this easily, snd_seq_change_queue_tempo(). Set NULL to the last argument, if you don't need any special settings.

In the above example, the tempo is changed immediately after the buffer is flushed by snd_seq_drain_output() call. You can schedule the event in a certain queue so that the tempo change happens at the scheduled time, too.

Starting and stopping a queue

To start, stop, or continue a queue, you need to send a queue-control event to the system timer port as well. There are helper functions, snd_seq_start_queue(), snd_seq_stop_queue() and snd_seq_continue_queue(). Note that if the last argument of these functions is NULL, the event is sent (i.e. operated) immediately after the buffer flush. If you want to schedule the event at the certain time, set up the event record and provide the pointer of that event record as the argument.

Only calling these functions doesn't deliver the event to the sequencer core but only put to the output buffer. You'll need to call snd_seq_drain_output() eventually.

More inside the subscription

Permissions

Each ALSA port can have capability flags. The most basic capability flags are SND_SEQ_PORT_CAP_READ and SND_SEQ_PORT_CAP_WRITE. The former means that the port allows to send events to other ports, whereas the latter capability means that the port allows to receive events from other ports. You may have noticed that meanings of READ and WRITE are permissions of the port from the viewpoint of other ports.

For allowing subscription from/to other clients, another capability flags must be set together with read/write capabilities above. For allowing read and write subscriptions, SND_SEQ_PORT_CAP_SUBS_READ and SND_SEQ_PORT_CAP_SUBS_WRITE are used, respectively. For example, the port with MIDI input device always has SND_SEQ_PORT_CAP_SUBS_READ capability, and the port with MIDI output device always has SND_SEQ_PORT_CAP_SUBS_WRITE capability together with SND_SEQ_PORT_CAP_READ and SND_SEQ_PORT_CAP_WRITE capabilities, respectively. Obviously, these flags have no influence if READ or WRITE> capability is not set.

Note that these flags are not necessary if the client subscribes itself to the specified port. For example, when a port makes READ subscription to MIDI input port, this port must have SND_SEQ_PORT_CAP_WRITE capability, but no SND_SEQ_PORT_CAP_SUBS_WRITE capability is required. Only MIDI input port must have SND_SEQ_PORT_CAP_SUBS_READ capability.

As default, the connection of ports via the third client is always allowed if proper read and write (subscription) capabilities are set both to the source and destination ports. For prohibiting this behavior, set a capability SND_SEQ_PORT_CAP_NO_EXPORT to the port. If this flag is set, subscription must be done by sender or receiver client itself. It is useful to avoid unexpected disconnection. The ports which won't accept subscription should have this capability for better security.

Subscription handlers

In ALSA library, subscription is done via snd_seq_subscribe_port() function. It takes the argument of snd_seq_port_subscribe_t record pointer. Suppose that you have a client which will receive data from a MIDI input device. The source and destination addresses are like the below;

snd_seq_addr_t sender, dest;
sender.client = MIDI_input_client;
sender.port = MIDI_input_port;
dest.client = my_client;
dest.port = my_port;
Definition: seq_event.h:178

To set these values as the connection call like this.

snd_seq_subscribe_port(handle, subs);
void snd_seq_port_subscribe_set_dest(snd_seq_port_subscribe_t *info, const snd_seq_addr_t *addr)
Set destination address of a port_subscribe container.
Definition: seq.c:2610
#define snd_seq_port_subscribe_alloca(ptr)
Definition: seq.h:323
int snd_seq_subscribe_port(snd_seq_t *handle, snd_seq_port_subscribe_t *sub)
subscribe a port connection
Definition: seq.c:2704
void snd_seq_port_subscribe_set_sender(snd_seq_port_subscribe_t *info, const snd_seq_addr_t *addr)
Set sender address of a port_subscribe container.
Definition: seq.c:2597
struct _snd_seq_port_subscribe snd_seq_port_subscribe_t
Definition: seq.h:319

When the connection should be exclusively done only between a certain pair, set exclusive attribute to the subscription record before calling snd_seq_subscribe_port.

void snd_seq_port_subscribe_set_exclusive(snd_seq_port_subscribe_t *info, int val)
Set the exclusive mode of a port_subscribe container.
Definition: seq.c:2636

The succeeding subscriptions will be refused.

The timestamp can be updated independently on each connection. When set up, the timestamp of incoming queue to the destination port is updated automatically to the time of the specified queue.

void snd_seq_port_subscribe_set_queue(snd_seq_port_subscribe_t *info, int q)
Set the queue id of a port_subscribe container.
Definition: seq.c:2623
void snd_seq_port_subscribe_set_time_update(snd_seq_port_subscribe_t *info, int val)
Set the time-update mode of a port_subscribe container.
Definition: seq.c:2652

For getting the wallclock time (sec/nsec pair), set real attribute:

void snd_seq_port_subscribe_set_time_real(snd_seq_port_subscribe_t *info, int val)
Set the real-time mode of a port_subscribe container.
Definition: seq.c:2668

Otherwise, the timestamp is stored in tick unit. This feature is useful when receiving events from MIDI input device. The event time is automatically set in the event record.

Note that an outsider client may connect other ports. In this case, however, the subscription may be refused if SND_SEQ_PORT_CAP_NO_EXPORT capability is set in either sender or receiver port.

Examples of subscription

Capture from keyboard

Assume MIDI input port = 64:0, application port = 128:0, and queue for timestamp = 1 with real-time stamp. The application port must have capability SND_SEQ_PORT_CAP_WRITE.

void capture_keyboard(snd_seq_t *seq)
{
snd_seq_addr_t sender, dest;
sender.client = 64;
sender.port = 0;
dest.client = 128;
dest.port = 0;
}

Output to MIDI device

Assume MIDI output port = 65:1 and application port = 128:0. The application port must have capability SND_SEQ_PORT_CAP_READ.

void subscribe_output(snd_seq_t *seq)
{
snd_seq_addr_t sender, dest;
sender.client = 128;
sender.port = 0;
dest.client = 65;
dest.port = 1;
}

This example can be simplified by using snd_seq_connect_to() function.

void subscribe_output(snd_seq_t *seq)
{
snd_seq_connect_to(seq, 0, 65, 1);
}
int snd_seq_connect_to(snd_seq_t *seq, int my_port, int dest_client, int dest_port)
simple subscription (w/o exclusive & time conversion)
Definition: seqmid.c:148

Arbitrary connection

Assume connection from application 128:0 to 129:0, and that subscription is done by the third application (130:0). The sender must have capabilities both SND_SEQ_PORT_CAP_READ and SND_SEQ_PORT_CAP_SUBS_READ, and the receiver SND_SEQ_PORT_CAP_WRITE and SND_SEQ_PORT_CAP_SUBS_WRITE, respectively.

// ..in the third application (130:0) ..
void coupling(snd_seq_t *seq)
{
snd_seq_addr_t sender, dest;
sender.client = 128;
sender.port = 0;
dest.client = 129;
dest.port = 0;
}

Event Processing

Addressing

Now, two ports are connected by subscription. Then how to send events?

The subscribed port doesn't have to know the exact sender address. Instead, there is a special address for subscribers, SND_SEQ_ADDRESS_SUBSCRIBERS. The sender must set this value as the destination client. Destination port is ignored.

The other values in source and destination addresses are identical with the normal event record. If the event is scheduled, proper queue and timestamp values must be set.

There is a convenient function to set the address in an event record. In order to set destination as subscribers, use snd_seq_ev_set_subs().

Delivery

If we send an event at the scheduled time t (tick) on the queue Q, the sender must set both schedule queue and time in the event record. The program appears like this:

void schedule_event(snd_seq_t *seq)
{
snd_seq_ev_set_source(&ev, my_port);
snd_seq_ev_schedule_tick(&ev, Q, 0, t);
... // set event type, data, so on..
...
snd_seq_drain_output(seq); // if necessary
}
int snd_seq_drain_output(snd_seq_t *handle)
drain output buffer to sequencer
Definition: seq.c:4034
#define snd_seq_ev_set_subs(ev)
set broadcasting to subscribers
Definition: seqmid.h:82
#define snd_seq_ev_set_source(ev, p)
set the source port
Definition: seqmid.h:105
#define snd_seq_ev_schedule_tick(ev, q, relative, ttick)
set tick-scheduling mode on queue
Definition: seqmid.h:132

Of course, you can use realtime stamp, too.

Direct Delivery

If the event is sent immediately without enqueued, the sender doesn't take care of queue and timestamp. As well as the case above, there is a function to set the direct delivery, snd_seq_ev_set_direct(). The program can be more simplified as follows:

void direct_delivery(snd_seq_t *seq)
{
... // set event type, data, so on..
}
#define snd_seq_ev_set_direct(ev)
set direct passing mode (without queued)
Definition: seqmid.h:117

You should flush event soon after output event. Otherwise, the event is enqueued on output queue of ALSA library (not in the kernel!), and will be never processed until this queue becomes full.

Filter Application

A typical filter program, which receives an event and sends it immediately after some modification, will appear as following:

void event_filter(snd_seq_t *seq, snd_seq_event_t *ev)
{
while (snd_seq_event_input(seq, &ev) >= 0) {
//.. modify input event ..
snd_seq_ev_set_source(ev, my_port);
}
}
int snd_seq_event_input(snd_seq_t *handle, snd_seq_event_t **ev)
retrieve an event from sequencer
Definition: seq.c:4158