indent: Indent and Format C Program Source

This is Edition 2.2.12 of The indent Manual, for Indent Version 2.2.12, last updated 2 September 2018.

Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 2014, 2015 Free Software Foundation, Inc. Copyright (C) 1995, 1996 Joseph Arceneaux. Copyright (C) 1999 Carlo Wood. Copyright (C) 2001 David Ingamells. Copyright (C) 2013 Ɓukasz Stelmach. Copyright (C) 2015 Tim Hentenaar.

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Next: , Previous: , Up: (dir)   [Contents][Index]

indent: Indent and Format C Program Source

The indent program changes the appearance of a C program by inserting or deleting whitespace.

This is Edition 2.2.12, 2 September 2018, of The indent Manual, for Indent Version 2.2.12.

Table of Contents


1 The indent Program

The indent program can be used to make code easier to read. It can also convert from one style of writing C to another.

indent understands a substantial amount about the syntax of C, but it also attempts to cope with incomplete and misformed syntax.

In version 1.2 and more recent versions, the GNU style of indenting is the default.


1.1 Invoking indent

As of version 1.3, the format of the indent command is:


indent [options] [input-files]

indent [options] [single-input-file] [-o output-file]

This format is different from earlier versions and other versions of indent.

In the first form, one or more input files are specified. indent makes a backup copy of each file, and the original file is replaced with its indented version. See Backup Files, for an explanation of how backups are made.

In the second form, only one input file is specified. In this case, or when the standard input is used, you may specify an output file after the -o option.

To cause indent to write to standard output, use the -st option. This is only allowed when there is only one input file, or when the standard input is used.

If no input files are named, the standard input is read for input. Also, if a filename named - is specified, then the standard input is read.

As an example, each of the following commands will input the program slithy_toves.c and write its indented text to slithy_toves.out:


indent slithy_toves.c -o slithy_toves.out

indent -st slithy_toves.c > slithy_toves.out

cat slithy_toves.c | indent -o slithy_toves.out

Most other options to indent control how programs are formatted. As of version 1.2, indent also recognizes a long name for each option name. Long options are prefixed by either -- or +. 1 In most of this document, the traditional, short names are used for the sake of brevity. See Option Summary, for a list of options, including both long and short names.

Here is another example:

indent -br test/metabolism.c -l85

This will indent the program test/metabolism.c using the -br and -l85 options, write the output back to test/metabolism.c, and write the original contents of test/metabolism.c to a backup file in the directory test.

Equivalent invocations using long option names for this example would be:


indent --braces-on-if-line --line-length185 test/metabolism.c

indent +braces-on-if-line +line-length185 test/metabolism.c

If you find that you often use indent with the same options, you may put those options into a file named .indent.pro. indent will look for a profile file in three places. First it will check the environment variable INDENT_PROFILE. If that exists its value is expected to name the file that is to be used. If the environment variable does not exist, indent looks for .indent.pro in the current directory and use that if found. Finally indent will search your home directory for .indent.pro and use that file if it is found. This behaviour is different from that of other versions of indent, which load both files if they both exist.

The format of .indent.pro is simply a list of options, just as they would appear on the command line, separated by white space (tabs, spaces, and newlines). Options in .indent.pro may be surrounded by C or C++ comments, in which case they are ignored.

Command line switches are handled after processing .indent.pro. Options specified later override arguments specified earlier, with one exception: Explicitly specified options always override background options (see Common styles). You can prevent indent from reading an .indent.pro file by specifying the -npro option.


1.2 Backup Files

As of version 1.3, GNU indent makes GNU-style backup files, the same way GNU Emacs does. This means that either simple or numbered backup filenames may be made.

Simple backup file names are generated by appending a suffix to the original file name. The default for this suffix is the one-character string ~ (tilde). Thus, the backup file for python.c would be python.c~.

Instead of the default, you may specify any string as a suffix by setting the environment variable SIMPLE_BACKUP_SUFFIX to your preferred suffix.

Numbered backup versions of a file momeraths.c look like momeraths.c.~23~, where 23 is the version of this particular backup. When making a numbered backup of the file src/momeraths.c, the backup file will be named src/momeraths.c.~V~, where V is one greater than the highest version currently existing in the directory src. The environment variable VERSION_WIDTH controls the number of digits, using left zero padding when necessary. For instance, setting this variable to "2" will lead to the backup file being named momeraths.c.~04~.

The type of backup file made is controlled by the value of the environment variable VERSION_CONTROL. If it is the string ‘simple’, then only simple backups will be made. If its value is the string ‘numbered’, then numbered backups will be made. If its value is ‘numbered-existing’, then numbered backups will be made if there already exist numbered backups for the file being indented; otherwise, a simple backup is made. If VERSION_CONTROL is not set, then indent assumes the behaviour of ‘numbered-existing’.

Other versions of indent use the suffix .BAK in naming backup files. This behaviour can be emulated by setting SIMPLE_BACKUP_SUFFIX to ‘.BAK’.

Note also that other versions of indent make backups in the current directory, rather than in the directory of the source file as GNU indent now does.


1.3 Common styles

There are several common styles of C code, including the GNU style, the Kernighan & Ritchie style, and the original Berkeley style. A style may be selected with a single background option, which specifies a set of values for all other options. However, explicitly specified options always override options implied by a background option.

As of version 1.2, the default style of GNU indent is the GNU style. Thus, it is no longer necessary to specify the option -gnu to obtain this format, although doing so will not cause an error. Option settings which correspond to the GNU style are:

-nbad -bap -nbc -bbo -bl -bli2 -bls -ncdb -nce -cp1 -cs -di2
-ndj -nfc1 -nfca -hnl -i2 -ip5 -lp -pcs -nprs -psl -saf -sai
-saw -nsc -nsob

The GNU coding style is that preferred by the GNU project. It is the style that the GNU Emacs C mode encourages and which is used in the C portions of GNU Emacs. (People interested in writing programs for Project GNU should get a copy of The GNU Coding Standards, which also covers semantic and portability issues such as memory usage, the size of integers, etc.)

The Kernighan & Ritchie style is used throughout their well-known book The C Programming Language. It is enabled with the -kr option. The Kernighan & Ritchie style corresponds to the following set of options:

-nbad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0
-cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs
-nprs -npsl -saf -sai -saw -nsc -nsob -nss -par

Kernighan & Ritchie style does not put comments to the right of code in the same column at all times (nor does it use only one space to the right of the code), so for this style indent has arbitrarily chosen column 33.

The style of the original Berkeley indent may be obtained by specifying -orig (or by specifying --original, using the long option name). This style is equivalent to the following settings:

-nbad -nbap -bbo -bc -br -brs -c33 -cd33 -cdb -ce -ci4 -cli0
-cp33 -di16 -fc1 -fca -hnl -i4 -ip4 -l75 -lp -npcs -nprs -psl
-saf -sai -saw -sc -nsob -nss -ts8

The Linux style is used in the linux kernel code and drivers. Code generally has to follow the Linux coding style to be accepted. This style is equivalent to the following settings:

-nbad -bap -nbc -bbo -hnl -br -brs -c33 -cd33 -ncdb -ce -ci4 
-cli0 -d0 -di1 -nfc1 -i8 -ip0 -l80 -lp -npcs -nprs -npsl -sai
-saf -saw -ncs -nsc -sob -nfca -cp33 -ss -ts8 -il1

1.4 Blank lines

Various programming styles use blank lines in different places. indent has a number of options to insert or delete blank lines in specific places.

The -bad option causes indent to force a blank line after every block of declarations. The -nbad option causes indent not to force such blank lines.

The -bap option forces a blank line after every procedure body. The -nbap option forces no such blank line.

The -bbb option forces a blank line before every boxed comment (See Comments.) The -nbbb option does not force such blank lines.

The -sob option causes indent to swallow optional blank lines (that is, any optional blank lines present in the input will be removed from the output). If the -nsob is specified, any blank lines present in the input file will be copied to the output file.


1.4.1 –blank-lines-after-declarations

The -bad option forces a blank line after every block of declarations. The -nbad option does not add any such blank lines.

For example, given the input

char *foo;
char *bar;
/* This separates blocks of declarations.  */
int baz;

indent -bad produces

char *foo;
char *bar;

/* This separates blocks of declarations.  */
int baz;

and indent -nbad produces

char *foo;
char *bar;
/* This separates blocks of declarations.  */
int baz;

1.4.2 –blank-lines-after-procedures

The -bap option forces a blank line after every procedure body.

For example, given the input

int
foo ()
{
  puts("Hi");
}
/* The procedure bar is even less interesting.  */
char *
bar ()
{
  puts("Hello");
}

indent -bap produces

int
foo ()
{
  puts ("Hi");
}

/* The procedure bar is even less interesting.  */
char *
bar ()
{
  puts ("Hello");
}

and indent -nbap produces

int
foo ()
{
  puts ("Hi");
}
/* The procedure bar is even less interesting.  */
char *
bar ()
{
  puts ("Hello");
}

No blank line will be added after the procedure foo.


1.5 Comments

indent formats both C and C++ comments. C comments are begun with ‘/*’, terminated with ‘*/’ and may contain newline characters. C++ comments begin with the delimiter ‘//’ and end at the newline.

indent handles comments differently depending upon their context. indent attempts to distinguish between comments which follow statements, comments which follow declarations, comments following preprocessor directives, and comments which are not preceded by code of any sort, i.e., they begin the text of the line (although not necessarily in column 1).

indent further distinguishes between comments found outside of procedures and aggregates, and those found within them. In particular, comments beginning a line found within a procedure will be indented to the column at which code is currently indented. The exception to this is a comment beginning in the leftmost column; such a comment is output at that column.

indent attempts to leave boxed comments unmodified. The general idea of such a comment is that it is enclosed in a rectangle or “box” of stars or dashes to visually set it apart. More precisely, boxed comments are defined as those in which the initial ‘/*’ is followed immediately by the character ‘*’, ‘=’, ‘_’, or ‘-’, or those in which the beginning comment delimiter (‘/*’) is on a line by itself, and the following line begins with a ‘*’ in the same column as the star of the opening delimiter.

Examples of boxed comments are:

/**********************
 * Comment in a box!! *
 **********************/

       /*
        * A different kind of scent,
        * for a different kind of comment.
        */

indent attempts to leave boxed comments exactly as they are found in the source file. Thus the indentation of the comment is unchanged, and its length is not checked in any way. The only alteration made is that an embedded tab character may be converted into the appropriate number of spaces.

If the -bbb option is specified, all such boxed comments will be preceded by a blank line, unless such a comment is preceded by code.

Comments which are not boxed comments may be formatted, which means that the line is broken to fit within a right margin and left-filled with whitespace. Single newlines are equivalent to a space, but blank lines (two or more newlines in a row) are taken to mean a paragraph break. Formatting of comments which begin after the first column is enabled with the -fca option. To format those beginning in column one, specify -fc1. Such formatting is disabled by default.

The right margin for formatting defaults to 78, but may be changed with the -lc option. If the margin specified does not allow the comment to be printed, the margin will be automatically extended for the duration of that comment. The margin is not respected if the comment is not being formatted.

If the -fnc option is specified, all comments with ‘/*’ embedded will have that character sequence replaced by a space followed by the character ‘*’ thus eliminating nesting.

If the comment begins a line (i.e., there is no program text to its left), it will be indented to the column it was found in unless the comment is within a block of code. In that case, such a comment will be aligned with the indented code of that block (unless the comment began in the first column). This alignment may be affected by the -d option, which specifies an amount by which such comments are moved to the left, or unindented. For example, -d2 places comments two spaces to the left of code. By default, comments are aligned with code, unless they begin in the first column, in which case they are left there by default — to get them aligned with the code, specify -fc1.

Comments to the right of code will appear by default in column 33. This may be changed with one of three options. -c will specify the column for comments following code, -cd specifies the column for comments following declarations, and -cp specifies the column for comments following preprocessor directives #else and #endif. -dj together with -cd0 can be used to suppress alignment of comments to the right of declarations, causing the comment to follow one tabstop from the end of the declaration. Normally -cd0 causes -c to become effective.

If the code to the left of the comment exceeds the beginning column, the comment column will be extended to the next tabstop column past the end of the code, unless the -ntac option is specified. In the case of preprocessor directives,comments are extended to to one space past the end of the directive. This extension lasts only for the output of that particular comment.

The -cdb option places the comment delimiters on blank lines. Thus, a single line comment like /* Loving hug */ can be transformed into:

/*
   Loving hug
 */

Stars can be placed at the beginning of multi-line comments with the -sc option. Thus, the single-line comment above can be transformed (with -cdb -sc) into:

/*
 * Loving hug
 */

Next: , Previous: , Up: The indent Program   [Contents][Index]

1.6 Statements

The -br or -bl option specifies how to format braces.

The -br option formats statement braces like this:

if (x > 0) {
  x--;
}

The -bl option formats them like this:

if (x > 0)
  {
    x--;
  }

If you use the -bl option, you may also want to specify the -bli option. This option specifies the number of spaces by which braces are indented. -bli2, the default, gives the result shown above. -bli0 results in the following:

if (x > 0)
{
  x--;
}

If you are using the -br option, you probably want to also use the -ce option. This causes the else in an if-then-else construct to cuddle up to the immediately preceding ‘}’. For example, with -br -ce you get the following:

if (x > 0) {
  x--;
} else {
  fprintf (stderr, "...something wrong?\n");
}

With -br -nce that code would appear as

if (x > 0) {
  x--;
}
else {
  fprintf (stderr, "...something wrong?\n");
}

An exception to the behavior occurs when there is a comment between the right brace and the subsequent else statement. While the -br option will cause a left brace to jump over the comment, the else does not jump over the comment to cuddle because it has a strong likelihood of changing the meaning of the comment.

The -cdw option causes the while in a do-while loop to cuddle up to the immediately preceding ‘}’. For example, with -cdw you get the following:

do {
  x--;
} while (x);

With -ncdw that code would appear as

do {
  x--;
}
while (x);

The -slc option allows for an unbraced conditional and its inner statement to appear on the same line. For example:

if (x) x--;
else x++;

Without -slc that code would appear as

if (x)
  x--;
else
  x++;

The -cli option specifies the number of spaces that case labels should be indented to the right of the containing switch statement.

The default gives code like:

switch (i)
  {
  case 0:
    break;
  case 1:
    {
      ++i;
    }
  default:
    break;
  }

Using the -cli2 that would become:

switch (i)
  {
    case 0:
      break;
    case 1:
      {
        ++i;
      }
    default:
      break;
  }

The indentation of the braces below a case statement can be controlled with the -cbin option. For example, using -cli2 -cbi0 results in:

switch (i)
  {
    case 0:
      break;
    case 1:
    {
      ++i;
    }
    default:
      break;
  }

If a semicolon is on the same line as a for or while statement, the -ss option will cause a space to be placed before the semicolon. This emphasizes the semicolon, making it clear that the body of the for or while statement is an empty statement. -nss disables this feature.

The -pcs option causes a space to be placed between the name of the procedure being called and the ‘(’ (for example, puts ("Hi");. The -npcs option would give puts("Hi");).

If the -cs option is specified, indent puts a space between a cast operator and the object to be cast. The -ncs ensures that there is no space between the cast operator and the object. Remember that indent only knows about the standard C data types and so cannot recognise user-defined types in casts. Thus (mytype)thing is not treated as a cast.

The -bs option ensures that there is a space between the keyword sizeof and its argument. In some versions, this is known as the ‘Bill_Shannon’ option.

The -saf option forces a space between a for and the following parenthesis. This is the default.

The -sai option forces a space between a if and the following parenthesis. This is the default.

The -saw option forces a space between a while and the following parenthesis. This is the default.

The -prs option causes all parentheses to be separated with a space from whatever is between them. For example, using -prs results in code like:

  while ( ( e_code - s_code ) < ( dec_ind - 1 ) )
    {
      set_buf_break ( bb_dec_ind );
      *e_code++ = ' ';
    }

1.7 Declarations

By default indent will line up identifiers, in the column specified by the -di option. For example, -di16 makes things look like:

int             foo;
char           *bar;

Using a small value (such as one or two) for the -di option can be used to cause the identifiers to be placed in the first available position; for example:

int foo;
char *bar;

The value given to the -di option will still affect variables which are put on separate lines from their types, for example -di2 will lead to:

int
  foo;

If the -bc option is specified, a newline is forced after each comma in a declaration. For example,

int a,
  b,
  c;

With the -nbc option this would look like

int a, b, c;

The -bfda option causes a newline to be forced after the comma separating the arguments of a function declaration. The arguments will appear at one indention level deeper than the function declaration. This is particularly helpful for functions with long argument lists. The option -bfde causes a newline to be forced before the closing bracket of the function declaration. For both options the ’n’ setting is the default: -nbfda and -nbfde.

For example,

void foo (int arg1, char arg2, int *arg3, long arg4, char arg5);

With the -bfda option this would look like

void foo (
    int arg1,
    char arg2,
    int *arg3,
    long arg4,
    char arg5);

With, in addition, the -bfde option this would look like

void foo (
    int arg1,
    char arg2,
    int *arg3,
    long arg4,
    char arg5
    );

The -psl option causes the type of a procedure being defined to be placed on the line before the name of the procedure. This style is required for the etags program to work correctly, as well as some of the c-mode functions of Emacs.

You must use the -T option to tell indent the name of all the typenames in your program that are defined by typedef. -T can be specified more than once, and all names specified are used. For example, if your program contains

typedef unsigned long CODE_ADDR;
typedef enum {red, blue, green} COLOR;

you would use the options -T CODE_ADDR -T COLOR.

The -brs or -bls option specifies how to format braces in struct declarations. The -brs option formats braces like this:

struct foo {
  int x;
};

The -bls option formats them like this:

struct foo
{
  int x;
};

Similarly to the structure brace -brs and -bls options, the function brace options -brf or -blf specify how to format the braces in function definitions. The -brf option formats braces like this:

int one(void) {
  return 1;
};

The -blf option formats them like this:

int one(void)
{
  return 1;
};

The -sar option affects how indent will render initializer lists. Without -sar they are formatted like this:

int a[] = {1, 2, 3, 4};

struct s {
  const char *name;
  int x;
} a[] = {
  {"name", 0},
  {"a", 1}
};

With -sar they are formatted like this, with spaces inside the braces:

int a[] = { 1, 2, 3, 4 };

struct s {
  const char *name;
  int x;
} a[] = {
  { "name", 0 },
  { "a", 1 }
};

1.8 Indentation

The most basic, and most controversial issues with regard to code formatting is precisely how indentation should be acoomplished. Fortunately, indent supports several different styles of identation. The default is to use tabs for indentation, which is specified by the -ut option. Assuming the default tab size of 8, the code would look like this:

int a(int b)
{
        return b;
|------|
 1 tab
}

For those that prefer spaces to tabs, indent provides the -nut option. The same code would look like this:

int a(int b)
{
        return b;
|------|
8 spaces
}

Another issue in the formatting of code is how far each line should be indented from the left margin. When the beginning of a statement such as if or for is encountered, the indentation level is increased by the value specified by the -i option. For example, use -i8 to specify an eight character indentation for each level. When a statement is broken across two lines, the second line is indented by a number of additional spaces specified by the -ci option. -ci defaults to 0. However, if the -lp option is specified, and a line has a left parenthesis which is not closed on that line, then continuation lines will be lined up to start at the character position just after the left parenthesis. This processing also applies to ‘[’ and applies to ‘{’ when it occurs in initialization lists. For example, a piece of continued code might look like this with -nlp -ci3 in effect:

  p1 = first_procedure (second_procedure (p2, p3),
     third_procedure (p4, p5));

With -lp in effect the code looks somewhat clearer:

  p1 = first_procedure (second_procedure (p2, p3),
                        third_procedure (p4, p5));

When a statement is broken in between two or more paren pairs (...), each extra pair causes the indentation level extra indentation:

if ((((i < 2 &&
        k > 0) || p == 0) &&
    q == 1) ||
  n = 0)

The option -ipN can be used to set the extra offset per paren. For instance, -ip0 would format the above as:

if ((((i < 2 &&
  k > 0) || p == 0) &&
  q == 1) ||
  n = 0)

indent assumes that tabs are placed at regular intervals of both input and output character streams. These intervals are by default 8 columns wide, but (as of version 1.2) may be changed by the -ts option. Tabs are treated as the equivalent number of spaces.

By default, indent will use tabs to indent as far as possible, and then pad with spaces until the desired position is reached. However, with the -as option, spaces will be used for alignment beyond the current indentation level. By default, assuming -lp is enabled, the code would be indented like so (‘t’ represents tabs, ‘s’ represents spaces):

unsigned long really_long_proc_name(unsigned long x, unsigned long y,
                                    int a)
|------||-------||------||-------|__
   t        t       t       t     ss
{
        p1 = first_procedure (second_procedure (p2, p3),
                              third_procedure (p4, p5));
|------||------||------|_____
   t       t       t    sssss
}

This is fine, if you assume that whoever is reading the code will honor your assumption of 8-space tabs. If the reader was using 4-space tabs, it would look like this:

unsigned long really_long_proc_name(unsigned long x, unsigned long y,
                      int a)
|---||---||---||---|__
  t    t    t    t  ss
{
        p1 = first_procedure (second_procedure (p2, p3),
                     third_procedure (p4, p5));
|---||---||---|______
  t    t    t  ssssss
}

The -as option fixes this so that the code will appear consistent regardless of what tab size the user users to read the code. This looks like:

unsigned long really_long_proc_name(unsigned long x, unsigned long y,
                                    int a)
____________________________________
ssssssssssssssssssssssssssssssssssss
{
        p1 = first_procedure (second_procedure (p2, p3),
                              third_procedure (p4, p5));
|------|______________________
   t    ssssssssssssssssssssss
}

The indentation of type declarations in old-style function definitions is controlled by the -ip parameter. This is a numeric parameter specifying how many spaces to indent type declarations. For example, the default -ip5 makes definitions look like this:

char *
create_world (x, y, scale)
     int x;
     int y;
     float scale;
{
  . . .
}

For compatibility with other versions of indent, the option -nip is provided, which is equivalent to -ip0.

ANSI C allows white space to be placed on preprocessor command lines between the character ‘#’ and the command name. By default, indent removes this space, but specifying the -lps option directs indent to leave this space unmodified. The option -ppi overrides -nlps and -lps.

This option can be used to request that preprocessor conditional statements can be indented by to given number of spaces, for example with the option -ppi 3

#if X
#if Y
#define Z 1
#else
#define Z 0
#endif
#endif

becomes

#if X
#   if Y
#      define Z 1
#   else
#      define Z 0
#   endif
#endif

This option sets the offset at which a label (except case labels) will be positioned. If it is set to zero or a positive number, this indicates how far from the left margin to indent a label. If it is set to a negative number, this indicates how far back from the current indent level to place the label. The default setting is -2 which matches the behaviour of earlier versions of indent. Note that this parameter does not affect the placing of case labels; see the -cli parameter for that. For example with the option -il 1

function()
{
    if (do_stuff1() == ERROR)
        goto cleanup1;

    if (do_stuff2() == ERROR)
        goto cleanup2;

    return SUCCESS;

  cleanup2:
    do_cleanup2();

  cleanup1:
    do_cleanup1();

    return ERROR;
}

becomes

function()
{
    if (do_stuff1() == ERROR)
        goto cleanup1;

    if (do_stuff2() == ERROR)
        goto cleanup2;

    return SUCCESS;

 cleanup2:
    do_cleanup2();

 cleanup1:
    do_cleanup1();

    return ERROR;
}

1.9 Breaking long lines

With the option -ln, or --line-lengthn, it is possible to specify the maximum length of a line of C code, not including possible comments that follow it.

When lines become longer than the specified line length, GNU indent tries to break the line at a logical place. This is new as of version 2.1 however and not very intelligent or flexible yet.

Currently there are three options that allow one to interfere with the algorithm that determines where to break a line.

The -bbo option causes GNU indent to prefer to break long lines before the boolean operators && and ||. The -nbbo option causes GNU indent not have that preference. For example, the default option -bbo (together with --line-length60 and --ignore-newlines) makes code look like this:

  if (mask
      && ((mask[0] == '\0')
          || (mask[1] == '\0'
              && ((mask[0] == '0') || (mask[0] == '*')))))

Using the option -nbbo will make it look like this:

  if (mask &&
      ((mask[0] == '\0') ||
       (mask[1] == '\0' &&
        ((mask[0] == '0') || (mask[0] == '*')))))

The default -hnl, however, honours newlines in the input file by giving them the highest possible priority to break lines at. For example, when the input file looks like this:

  if (mask
      && ((mask[0] == '\0')
      || (mask[1] == '\0' && ((mask[0] == '0') || (mask[0] == '*')))))

then using the option -hnl, or --honour-newlines, together with the previously mentioned -nbbo and --line-length60, will cause the output not to be what is given in the last example but instead will prefer to break at the positions where the code was broken in the input file:

  if (mask
      && ((mask[0] == '\0')
          || (mask[1] == '\0' &&
              ((mask[0] == '0') || (mask[0] == '*')))))

The idea behind this option is that lines which are too long, but are already broken up, will not be touched by GNU indent. Really messy code should be run through indent at least once using the --ignore-newlines option though.

The -gts option affects how the gettext standard macros _() and N_() are treated. The default behavior (or the use of -ngts) causes indent to treat them as it does other functions, so that a long string is broken like the following example.

  if (mask)
    {
      warning (_
               ("This is a long string that stays together."));
    }

With the -gts option, the underscore is treated as a part of the string, keeping it tied to the string, and respecting the fact that gettext is unobtrusively providing a localized string. This only works if _(" is together as a unit at the beginning of the string and ") is together as a unit at the end.

  if (mask)
    {
      warning 
        (_("This is a long string that stays together."));
    }

1.10 Disabling Formatting

Formatting of C code may be disabled for portions of a program by embedding special control comments in the program. To turn off formatting for a section of a program, place the disabling control comment /* *INDENT-OFF* */ on a line by itself just before that section. Program text scanned after this control comment is output precisely as input with no modifications until the corresponding enabling comment is scanned on a line by itself. The enabling control comment is /* *INDENT-ON* */, and any text following the comment on the line is also output unformatted. Formatting begins again with the input line following the enabling control comment.

More precisely, indent does not attempt to verify the closing delimiter (*/) for these C comments, and any whitespace on the line is totally transparent.

These control comments also function in their C++ formats, namely // *INDENT-OFF* and // *INDENT-ON*.

It should be noted that the internal state of indent remains unchanged over the course of the unformatted section. Thus, for example, turning off formatting in the middle of a function and continuing it after the end of the function may lead to bizarre results. It is therefore wise to be somewhat modular in selecting code to be left unformatted.

As a historical note, some earlier versions of indent produced error messages beginning with *INDENT**. These versions of indent were written to ignore any input text lines which began with such error messages. I have removed this incestuous feature from GNU indent.


1.11 Miscellaneous options

To find out what version of indent you have, use the command indent -version. This will report the version number of indent, without doing any of the normal processing.

The -v option can be used to turn on verbose mode. When in verbose mode, indent reports when it splits one line of input into two more more lines of output, and gives some size statistics at completion.

The -pmt option causes indent to preserve the access and modification times on the output files. Using this option has the advantage that running indent on all source and header files in a project won’t cause make to rebuild all targets. This option is only available on Operating Systems that have the POSIX utime(2) function.


1.12 Bugs

Please report any bugs to bug-indent@gnu.org.

When indent is run twice on a file, with the same profile, it should never change that file the second time. With the current design of indent, this can not be guaranteed, and it has not been extensively tested.

indent does not understand C. In some cases this leads to the inability to join lines. The result is that running a file through indent is irreversible, even if the used input file was the result of running indent with a given profile (.indent.pro).

While an attempt was made to get indent working for C++, it will not do a good job on any C++ source except the very simplest.

indent does not look at the given --line-length option when writing comments to the output file. This results often in comments being put far to the right. In order to prohibit indent from joining a broken line that has a comment at the end, make sure that the comments start on the first line of the break.

indent does not count lines and comments (see the -v option) when indent is turned off with /* *INDENT-OFF* */.

Comments of the form /*UPPERCASE*/ are not treated as comment but as an identifier, causing them to be joined with the next line. This renders comments of this type useless, unless they are embedded in the code to begin with.


Appendix A Option Summary

Here is a list of all the options for indent, alphabetized by short option. It is followed by a cross key alphabetized by long option.

-as
--align-with-spaces

If using tabs for indentation, use spaces for alignment.
See Indentation.

-bad
--blank-lines-after-declarations

Force blank lines after the declarations.
See Blank lines.

-bap
--blank-lines-after-procedures

Force blank lines after procedure bodies.
See Blank lines.

-bbb
--blank-lines-before-block-comments

Force blank lines before block comments.
See Blank lines.

-bbo
--break-before-boolean-operator

Prefer to break long lines before boolean operators.
See Breaking long lines.

-bc
--blank-lines-after-commas

Force newline after comma in declaration.
See Declarations.

-bl
--braces-after-if-line

Put braces on line after if, etc.
See Statements.

-blf
--braces-after-func-def-line

Put braces on line following function definition line.
See Declarations.

-blin
--brace-indentn

Indent braces n spaces.
See Statements.

-bls
--braces-after-struct-decl-line

Put braces on the line after struct declaration lines.
See Declarations.

-br
--braces-on-if-line

Put braces on line with if, etc.
See Statements.

-brf
--braces-on-func-def-line

Put braces on function definition line.
See Declarations.

-brs
--braces-on-struct-decl-line

Put braces on struct declaration line.
See Declarations.

-bs
--Bill-Shannon
--blank-before-sizeof

Put a space between sizeof and its argument.
See Statements.

-cn
--comment-indentationn

Put comments to the right of code in column n.
See Comments.

-cbin
--case-brace-indentationn

Indent braces after a case label N spaces.
See Statements.

-cdn
--declaration-comment-columnn

Put comments to the right of the declarations in column n.
See Comments.

-cdb
--comment-delimiters-on-blank-lines

Put comment delimiters on blank lines.
See Comments.

-cdw
--cuddle-do-while

Cuddle while of do {} while; and preceding ‘}’.
See Comments.

-ce
--cuddle-else

Cuddle else and preceding ‘}’.
See Comments.

-cin
--continuation-indentationn

Continuation indent of n spaces.
See Statements.

-clin
--case-indentationn

Case label indent of n spaces.
See Statements.

-cpn
--else-endif-columnn

Put comments to the right of #else and #endif statements in column n.
See Comments.

-cs
--space-after-cast

Put a space after a cast operator.
See Statements.

-dn
--line-comments-indentationn

Set indentation of comments not to the right of code to n spaces.
See Comments.

-bfda
--break-function-decl-args

Break the line before all arguments in a declaration.
See Declarations.

-bfde
--break-function-decl-args-end

Break the line after the last argument in a declaration.
See Declarations.

-dj
--left-justify-declarations

If -cd 0 is used then comments after declarations are left justified behind the declaration.
See Declarations.

-din
--declaration-indentationn

Put variables in column n.
See Declarations.

-fc1
--format-first-column-comments

Format comments in the first column.
See Comments.

-fca
--format-all-comments

Do not disable all formatting of comments.
See Comments.

-fnc
--fix-nested-comments

Fix nested comments.
See Comments.

-gnu
--gnu-style

Use GNU coding style. This is the default.
See Common styles.

-gts
--gettext-strings

Treat gettext _("...") and N_("...") as strings rather than as functions.
See Breaking long lines.

-hnl
--honour-newlines

Prefer to break long lines at the position of newlines in the input.
See Breaking long lines.

-in
--indent-leveln

Set indentation level to n spaces.
See Indentation.

-iln
--indent-labeln

Set offset for labels to column n.
See Indentation.

-ipn
--parameter-indentationn

Indent parameter types in old-style function definitions by n spaces.
See Indentation.

-kr
--k-and-r-style

Use Kernighan & Ritchie coding style.
See Common styles.

-ln
--line-lengthn

Set maximum line length for non-comment lines to n.
See Breaking long lines.

-lcn
--comment-line-lengthn

Set maximum line length for comment formatting to n.
See Comments.

-linux
--linux-style

Use Linux coding style.
See Common styles.

-lp
--continue-at-parentheses

Line up continued lines at parentheses.
See Indentation.

-lps
--leave-preprocessor-space

Leave space between ‘#’ and preprocessor directive.
See Indentation.

-nbad
--no-blank-lines-after-declarations

Do not force blank lines after declarations.
See Blank lines.

-nbap
--no-blank-lines-after-procedures

Do not force blank lines after procedure bodies.
See Blank lines.

-nbbo
--break-after-boolean-operator

Do not prefer to break long lines before boolean operators.
See Breaking long lines.

-nbc
--no-blank-lines-after-commas

Do not force newlines after commas in declarations.
See Declarations.

-nbfda
--dont-break-function-decl-args

Don’t put each argument in a function declaration on a separate line.
See Declarations.

-ncdb
--no-comment-delimiters-on-blank-lines

Do not put comment delimiters on blank lines.
See Comments.

-ncdw
--dont-cuddle-do-while

Do not cuddle } and the while of a do {} while;.
See Statements.

-nce
--dont-cuddle-else

Do not cuddle } and else.
See Statements.

-ncs
--no-space-after-casts

Do not put a space after cast operators.
See Statements.

-ndjn
--dont-left-justify-declarations

Comments after declarations are treated the same as comments after other statements.
See Declarations.

-nfc1
--dont-format-first-column-comments

Do not format comments in the first column as normal.
See Comments.

-nfca
--dont-format-comments

Do not format any comments.
See Comments.

-ngts
--no-gettext-strings

Treat gettext _("...") and N_("...") as normal functions. This is the default.
See Breaking long lines.

-nhnl
--ignore-newlines

Do not prefer to break long lines at the position of newlines in the input.
See Breaking long lines.

-nip
--no-parameter-indentation

Zero width indentation for parameters.
See Indentation.

-nlp
--dont-line-up-parentheses

Do not line up parentheses.
See Statements.

-npcs
--no-space-after-function-call-names

Do not put space after the function in function calls.
See Statements.

-nprs
--no-space-after-parentheses

Do not put a space after every ’(’ and before every ’)’.
See Statements.

-npsl
--dont-break-procedure-type

Put the type of a procedure on the same line as its name.
See Declarations.

-nsaf
--no-space-after-for

Do not put a space after every for.
See Statements.

-nsai
--no-space-after-if

Do not put a space after every if.
See Statements.

-nsaw
--no-space-after-while

Do not put a space after every while.
See Statements.

-nsc
--dont-star-comments

Do not put the ‘*’ character at the left of comments.
See Comments.

-nsob
--leave-optional-blank-lines

Do not swallow optional blank lines.
See Blank lines.

-nss
--dont-space-special-semicolon

Do not force a space before the semicolon after certain statements. Disables -ss.
See Statements.

-ntac
--dont-tab-align-comments

Do not pad comments out to the nearest tabstop.
See Comments.

-nut
--no-tabs

Use spaces instead of tabs.
See Indentation.

-nv
--no-verbosity

Disable verbose mode.
See Miscellaneous options.

-orig
--original

Use the original Berkeley coding style.
See Common styles.

-npro
--ignore-profile

Do not read .indent.pro files.
See Invoking indent.

-pal
--pointer-align-left

Put asterisks in pointer declarations on the left of spaces, next to types: “char* p”.

-par
--pointer-align-right

Put asterisks in pointer declarations on the right of spaces, next to variable names: “char *p”. This is the default behavior.

-pcs
--space-after-procedure-calls

Insert a space between the name of the procedure being called and the ‘(’.
See Statements.

-pin
--paren-indentationn

Specify the extra indentation per open parentheses ’(’ when a statement is broken. See Statements.

-pmt
--preserve-mtime

Preserve access and modification times on output files. See Miscellaneous options.

-ppin
--preprocessor-indentationn

Specify the indentation for preprocessor conditional statements. See Indentation.

-prs
--space-after-parentheses

Put a space after every ’(’ and before every ’)’.
See Statements.

-psl
--procnames-start-lines

Put the type of a procedure on the line before its name.
See Declarations.

-saf
--space-after-for

Put a space after each for.
See Statements.

-sai
--space-after-if

Put a space after each if.
See Statements.

-sar
--spaces-around-initializers

Put a space after the ‘{’ and before the ‘}’ in initializers.
See Declarations.

-saw
--space-after-while

Put a space after each while.
See Statements.

-sbin
--struct-brace-indentationn

Indent braces of a struct, union or enum N spaces.
See Statements.

-sc
--start-left-side-of-comments

Put the ‘*’ character at the left of comments.
See Comments.

-slc
--single-line-conditionals

Allow for unbraced conditionals (if, else, etc.) to have their inner statement on the same line.
See Statements.

-sob
--swallow-optional-blank-lines

Swallow optional blank lines.
See Blank lines.

-ss
--space-special-semicolon

On one-line for and while statements, force a blank before the semicolon.
See Statements.

-st
--standard-output

Write to standard output.
See Invoking indent.

-T

Tell indent the name of typenames.
See Declarations.

-tsn
--tab-sizen

Set tab size to n spaces.
See Indentation.

-ut
--use-tabs

Use tabs. This is the default.
See Indentation.

-v
--verbose

Enable verbose mode.
See Miscellaneous options.

-version

Output the version number of indent.
See Miscellaneous options.

Options’ Cross Key

Here is a list of options alphabetized by long option, to help you find the corresponding short option.

--align-with-spaces                             -as
--blank-lines-after-commas                      -bc             
--blank-lines-after-declarations                -bad            
--blank-lines-after-procedures                  -bap            
--blank-lines-before-block-comments             -bbb            
--braces-after-if-line                          -bl             
--braces-after-func-def-line                    -blf
--brace-indent                                  -bli
--braces-after-struct-decl-line                 -bls
--braces-on-if-line                             -br             
--braces-on-func-def-line                       -brf
--braces-on-struct-decl-line                    -brs
--break-after-boolean-operator                  -nbbo
--break-before-boolean-operator                 -bbo
--break-function-decl-args                      -bfda
--break-function-decl-args-end                  -bfde
--case-indentation                              -clin     
--case-brace-indentation                        -cbin
--comment-delimiters-on-blank-lines             -cdb            
--comment-indentation                           -cn       
--continuation-indentation                      -cin      
--continue-at-parentheses                       -lp             
--cuddle-do-while                               -cdw
--cuddle-else                                   -ce             
--declaration-comment-column                    -cdn      
--declaration-indentation                       -din      
--dont-break-function-decl-args                 -nbfda
--dont-break-function-decl-args-end             -nbfde
--dont-break-procedure-type                     -npsl           
--dont-cuddle-do-while                          -ncdw
--dont-cuddle-else                              -nce            
--dont-format-comments                          -nfca           
--dont-format-first-column-comments             -nfc1           
--dont-line-up-parentheses                      -nlp            
--dont-left-justify-declarations                -ndj  
--dont-space-special-semicolon                  -nss
--dont-star-comments                            -nsc            
--dont-tab-align-comments                       -ntac
--else-endif-column                             -cpn
--format-all-comments                           -fca            
--format-first-column-comments                  -fc1            
--gnu-style                                     -gnu            
--honour-newlines                               -hnl
--ignore-newlines                               -nhnl
--ignore-profile                                -npro           
--indent-label                                  -iln       
--indent-level                                  -in       
--k-and-r-style                                 -kr             
--leave-optional-blank-lines                    -nsob           
--leave-preprocessor-space                      -lps
--left-justify-declarations                     -dj 
--line-comments-indentation                     -dn       
--line-length                                   -ln       
--linux-style                                   -linux             
--no-blank-lines-after-commas                   -nbc            
--no-blank-lines-after-declarations             -nbad           
--no-blank-lines-after-procedures               -nbap           
--no-blank-lines-before-block-comments          -nbbb           
--no-comment-delimiters-on-blank-lines          -ncdb           
--no-space-after-casts                          -ncs            
--no-parameter-indentation                      -nip            
--no-space-after-for				-nsaf
--no-space-after-function-call-names            -npcs           
--no-space-after-if				-nsai
--no-space-after-parentheses                    -nprs
--no-space-after-while				-nsaw
--no-tabs                                       -nut
--no-verbosity                                  -nv             
--original                                      -orig
--parameter-indentation                         -ipn      
--paren-indentation                             -pin
--preserve-mtime				-pmt
--preprocessor-indentation                      -ppin
--procnames-start-lines                         -psl            
--single-line-conditionals                      -slc
--space-after-cast                              -cs             
--space-after-for				-saf
--space-after-if				-sai
--space-after-parentheses                       -prs
--space-after-procedure-calls                   -pcs            
--space-after-while				-saw
--space-special-semicolon                       -ss             
--spaces-around-initializers                    -sar
--standard-output                               -st             
--start-left-side-of-comments                   -sc             
--struct-brace-indentation                      -sbin
--swallow-optional-blank-lines                  -sob            
--tab-size                                      -tsn      
--use-tabs                                      -ut
--verbose                                       -v              

Index

Jump to:   -   .  
B   C   E   G   I   K   L   O   S   T   U  
Index Entry  Section

-
--align-with-spaces: Indentation
--blank-after-sizeof: Statements
--blank-lines-after-commas: Declarations
--blank-lines-after-declarations: -bad
--blank-lines-after-procedures: -bap
--blank-lines-before-block-comments: Blank lines
--brace-indentn: Statements
--braces-after-func-def-line: Declarations
--braces-after-if-line: Statements
--braces-after-struct-decl-line: Declarations
--braces-on-func-def-line: Declarations
--braces-on-if-line: Statements
--braces-on-struct-decl-line: Declarations
--break-after-boolean-operator: Breaking long lines
--break-before-boolean-operator: Breaking long lines
--break-function-decl-args: Declarations
--break-function-decl-args-end: Declarations
--case-brace-indentationn: Statements
--case-indentationn: Statements
--comment-delimiters-on-blank-lines: Comments
--comment-indentationn: Comments
--continuation-indentationn: Indentation
--continue-at-parentheses: Indentation
--cuddle-do-while: Statements
--cuddle-else: Statements
--declaration-comment-columnn: Comments
--declaration-indentationn: Declarations
--dont-break-function-decl-args: Declarations
--dont-break-function-decl-args-end: Declarations
--dont-break-procedure-type: Declarations
--dont-cuddle-do-while: Statements
--dont-cuddle-else: Statements
--dont-format-comments: Comments
--dont-format-first-column-comments: Comments
--dont-left-justify-declarations: Comments
--dont-line-up-parentheses: Indentation
--dont-space-special-semicolon: Statements
--dont-star-comments: Comments
--dont-tab-align-comments: Comments
--else-endif-columnn: Comments
--fix-nested-comments: Comments
--format-all-comments: Comments
--format-first-column-comments: Comments
--gettext-strings: Breaking long lines
--gettext-strings: Breaking long lines
--gnu-style: Common styles
--honour-newlines: Breaking long lines
--ignore-newlines: Breaking long lines
--ignore-profile: Invoking indent
--indent-labeln: Indentation
--indent-leveln: Indentation
--k-and-r-style: Common styles
--leave-optional-blank-lines: Blank lines
--leave-preprocessor-space: Indentation
--left-justify-declarations: Comments
--line-comments-indentationn: Comments
--line-lengthn: Breaking long lines
--linux-style: Common styles
--no-blank-lines-after-commas: Declarations
--no-blank-lines-after-declarations: -bad
--no-blank-lines-after-procedures: -bap
--no-blank-lines-before-block-comments: Blank lines
--no-comment-delimiters-on-blank-lines: Comments
--no-parameter-indentation: Indentation
--no-space-after-cast: Statements
--no-space-after-for: Statements
--no-space-after-function-call-names: Statements
--no-space-after-if: Statements
--no-space-after-while: Statements
--no-tabs: Declarations
--no-tabs: Indentation
--no-verbosity: Miscellaneous options
--original: Common styles
--output-file: Invoking indent
--parameter-indentationn: Indentation
--preprocessor-indentationn: Indentation
--preserve-mtime: Miscellaneous options
--procnames-start-lines: Declarations
--remove-preprocessor-space: Indentation
--single-line-conditionals: Statements
--space-after-cast: Statements
--space-after-for: Statements
--space-after-if: Statements
--space-after-parentheses: Statements
--space-after-procedure-calls: Statements
--space-after-while: Statements
--space-special-semicolon: Statements
--spaces-around-initializers: Declarations
--standard-output: Invoking indent
--star-left-side-of-comments: Comments
--swallow-optional-blank-lines: Blank lines
--tab-sizen: Indentation
--use-tabs: Declarations
--verbose: Miscellaneous options
-as: Indentation
-bad: -bad
-bap: -bap
-bbb: Blank lines
-bbo: Breaking long lines
-bc: Declarations
-bfda: Declarations
-bfde: Declarations
-bl: Statements
-blf: Declarations
-blin: Statements
-bls: Declarations
-br: Statements
-brs: Declarations
-brs: Declarations
-bs: Statements
-cbin: Statements
-cdb: Comments
-cdn: Comments
-cdw: Statements
-ce: Statements
-cin: Indentation
-clin: Statements
-cn: Comments
-cpn: Comments
-cs: Statements
-dce: Statements
-din: Declarations
-dj: Comments
-dn: Comments
-fc1: Comments
-fca: Comments
-fnc: Comments
-gnu: Common styles
-gts: Breaking long lines
-hnl: Breaking long lines
-iln: Indentation
-in: Indentation
-ipn: Indentation
-kr: Common styles
-linux: Common styles
-ln: Breaking long lines
-lp: Indentation
-lps: Indentation
-nbad: -bad
-nbap: -bap
-nbbb: Blank lines
-nbbo: Breaking long lines
-nbc: Declarations
-nbfda: Declarations
-nbfde: Declarations
-ncdb: Comments
-ncdw: Statements
-ncs: Statements
-ndj: Comments
-nfc1: Comments
-nfca: Comments
-ngts: Breaking long lines
-nhnl: Breaking long lines
-nip: Indentation
-nlp: Indentation
-nlps: Indentation
-npcs: Statements
-npmt: Miscellaneous options
-npro: Invoking indent
-npsl: Declarations
-nsaf: Statements
-nsai: Statements
-nsaw: Statements
-nsc: Comments
-nsob: Blank lines
-nss: Statements
-ntac: Comments
-nut: Declarations
-nut: Indentation
-nv: Miscellaneous options
-o: Invoking indent
-orig: Common styles
-pcs: Statements
-pmt: Miscellaneous options
-ppin: Indentation
-prs: Statements
-psl: Declarations
-saf: Statements
-sai: Statements
-sar: Declarations
-saw: Statements
-sc: Comments
-slc: Statements
-sob: Blank lines
-ss: Statements
-st: Invoking indent
-T: Declarations
-tsn: Indentation
-ut: Declarations
-v: Miscellaneous options
-version: Miscellaneous options

.
.indent.pro file: Invoking indent

B
backup files: Backup files
Beginning indent: Invoking indent
Berkeley style: Common styles
Blank lines: Blank lines

C
Comments: Comments

E
etags requires -psl: Declarations

G
GNU style: Common styles

I
Initialization file: Invoking indent
Invoking indent: Invoking indent

K
Kernighan & Ritchie style: Common styles

L
Linux style: Common styles
Long options, use of: Invoking indent

O
Original Berkeley style: Common styles
Output File Specification: Invoking indent

S
Standard Output: Invoking indent
Starting indent: Invoking indent

T
typedef: Declarations
Typenames: Declarations

U
Using Standard Input: Invoking indent

Jump to:   -   .  
B   C   E   G   I   K   L   O   S   T   U  

Footnotes

(1)

+ is being superseded by -- to maintain consistency with the POSIX standard.