This connector is available on the Conrad Electronics Multimeter 3610D and is used to connect it to a computer.
(at the multimeter).
5 PIN UNKNOWN CONNECTOR at the multimeter
| Conrad | Name | Description | Dir |
|---|---|---|---|
| 1 | RTS | Request To Send |  |
| 2 | RXD | Receive Data |  |
| 3 | TXD | Transmit Data | |
| 4 | DTR | Data Terminal Ready | |
| 5 | GND | Ground |  |
Note: Since the multimeter is a DCE the pin naming can seem strange.
| Contributor: | Joakim Ögren, Anselm Belz |
| Source: | ? |
Copyright © The Hardware Book Team 1996-2004.
May be copied and redistributed, partially or in whole, as appropriate.
Document last modified: 2002-01-10