Introduction

This plugin is used to get the correct version number on Nitrokey storage devices. These devices have updatable firmware but so far no updates are available from the vendor.

The device is switched to a DFU bootloader only when the secret firmware pin is entered into the nitrokey-app tool. This cannot be automated.

GUID Generation

These devices use the standard USB DeviceInstanceId values, e.g.

  • USB\VID_20A0&PID_4109&REV_0001
  • USB\VID_20A0&PID_4109
  • USB\VID_20A0

Update Behavior

The device usually presents in runtime mode, but on detach re-enumerates with a different USB VID and PID in DFU mode. The device is then handled by the dfu plugin.

On DFU attach the device again re-enumerates back to the runtime mode.

For this reason the REPLUG_MATCH_GUID internal device flag is used so that the bootloader and runtime modes are treated as the same device.

Vendor ID Security

The vendor ID is set from the USB vendor, in this instance set to USB:0x20A0 in runtime mode and USB:0x03EB in bootloader mode.

External Interface Access

This plugin requires read/write access to /dev/bus/usb.