Macros | Typedefs | Enumerations | Functions | Variables
Lock

This group provides thread locking and synchronization capabilities. More...

Macros

#define EINA_MAIN_LOOP_CHECK_RETURN_VAL(val)   do {} while(0)
 Definition for the macro that doesn't do anything unless EINA_HAVE_DEBUG_THREADS is defined. More...
 
#define EINA_MAIN_LOOP_CHECK_RETURN   do {} while(0)
 Definition for the macro that doesn't do anything unless EINA_HAVE_DEBUG_THREADS is defined.
 

Typedefs

typedef void(* Eina_TLS_Delete_Cb) (void *ptr)
 A callback type for deallocation of thread level storage data.
 
typedef struct _Eina_Barrier Eina_Barrier
 An opaque type for working with barrier locks.
 
typedef struct _Eina_Lock Eina_Lock
 An opaque type for working with locks.
 
typedef struct _Eina_Condition Eina_Condition
 An opaque type that represents a condition variable.
 
typedef struct _Eina_RWLock Eina_RWLock
 An opaque type for working with read/write locks.
 
typedef pthread_key_t Eina_TLS
 An opaque type for working with thread level storage.
 
typedef sem_t Eina_Semaphore
 An opaque type for working with semaphores.
 
typedef Eina_Lock Eina_Spinlock
 An opaque type for working with spinlocks.
 

Enumerations

enum  Eina_Lock_Result {
  EINA_LOCK_FAIL = EINA_FALSE ,
  EINA_LOCK_SUCCEED = EINA_TRUE ,
  EINA_LOCK_DEADLOCK
}
 Return codes for lock operations. More...
 

Functions

static Eina_Bool eina_lock_new (Eina_Lock *mutex)
 Initializes a new Eina_Lock. More...
 
static Eina_Bool eina_lock_recursive_new (Eina_Lock *mutex)
 Initializes a new Eina_Lock that is recursive. More...
 
static void eina_lock_free (Eina_Lock *mutex)
 Deallocates an Eina_Lock. More...
 
static Eina_Lock_Result eina_lock_take (Eina_Lock *mutex)
 Attempts to take a lock. More...
 
static Eina_Lock_Result eina_lock_take_try (Eina_Lock *mutex)
 Attempts to take a lock if possible. More...
 
static Eina_Lock_Result eina_lock_release (Eina_Lock *mutex)
 Releases a lock. More...
 
EINA_API void eina_lock_debug (const Eina_Lock *mutex)
 Prints debug information about a lock. More...
 
static Eina_Bool eina_condition_new (Eina_Condition *cond, Eina_Lock *mutex)
 Initializes a new condition variable. More...
 
static void eina_condition_free (Eina_Condition *cond)
 Deallocates a condition variable. More...
 
static Eina_Bool eina_condition_wait (Eina_Condition *cond)
 Causes a thread to wait until signaled by the condition. More...
 
static Eina_Bool eina_condition_timedwait (Eina_Condition *cond, double t)
 Causes a thread to wait until signaled by the condition or a timeout is reached. More...
 
static Eina_Bool eina_condition_broadcast (Eina_Condition *cond)
 Signals all threads waiting for a condition. More...
 
static Eina_Bool eina_condition_signal (Eina_Condition *cond)
 Signals a thread waiting for a condition. More...
 
static Eina_Bool eina_rwlock_new (Eina_RWLock *mutex)
 Initializes a new Eina_RWLock. More...
 
static void eina_rwlock_free (Eina_RWLock *mutex)
 Deallocates an Eina_RWLock. More...
 
static Eina_Lock_Result eina_rwlock_take_read (Eina_RWLock *mutex)
 Attempts to take a read lock. More...
 
static Eina_Lock_Result eina_rwlock_take_write (Eina_RWLock *mutex)
 Attempts to take a write lock. More...
 
static Eina_Lock_Result eina_rwlock_release (Eina_RWLock *mutex)
 Releases a lock. More...
 
static Eina_Bool eina_tls_new (Eina_TLS *key)
 Initializes a new Eina_TLS, or thread level storage, to store thread specific data. More...
 
static Eina_Bool eina_tls_cb_new (Eina_TLS *key, Eina_TLS_Delete_Cb delete_cb)
 Initializes a new Eina_TLS, or thread level storage, to store thread specific data. More...
 
static void eina_tls_free (Eina_TLS key)
 Frees an allocated Eina_TLS. More...
 
static void * eina_tls_get (Eina_TLS key)
 Gets the value in Eina_TLS for this thread. More...
 
static Eina_Bool eina_tls_set (Eina_TLS key, const void *data)
 Sets the value in Eina_TLS for this thread. More...
 
static Eina_Bool eina_semaphore_new (Eina_Semaphore *sem, int count_init)
 Initializes a new Eina_Semaphore. More...
 
static Eina_Bool eina_semaphore_free (Eina_Semaphore *sem)
 Frees an allocated Eina_Semaphore. More...
 
static Eina_Bool eina_semaphore_lock (Eina_Semaphore *sem)
 Gets a lock on an Eina_Semaphore. More...
 
static Eina_Bool eina_semaphore_release (Eina_Semaphore *sem, int count_release)
 Releases a lock on an Eina_Semaphore. More...
 
static Eina_Bool eina_barrier_new (Eina_Barrier *barrier, int needed)
 Initializes a new Eina_Barrier. More...
 
static void eina_barrier_free (Eina_Barrier *barrier)
 Frees an allocated Eina_Barrier. More...
 
static Eina_Bool eina_barrier_wait (Eina_Barrier *barrier)
 Increments the count of threads that are waiting on barrier. More...
 
static Eina_Bool eina_spinlock_new (Eina_Spinlock *spinlock)
 Initializes a new Eina_Spinlock. More...
 
static Eina_Lock_Result eina_spinlock_take (Eina_Spinlock *spinlock)
 Attempts to take a spinlock. More...
 
static Eina_Lock_Result eina_spinlock_take_try (Eina_Spinlock *spinlock)
 Attempts to take a spinlock if possible. More...
 
static Eina_Lock_Result eina_spinlock_release (Eina_Spinlock *spinlock)
 Releases a spinlock. More...
 
static void eina_spinlock_free (Eina_Spinlock *spinlock)
 Deallocates an Eina_Spinlock. More...
 

Variables

EINA_API Eina_Error EINA_ERROR_NOT_MAIN_LOOP
 A type definition for warning that a function was called from somewhere other than the EFL main loop.
 

Detailed Description

This group provides thread locking and synchronization capabilities.

Similar to POSIX threads (pthreads), but it takes care of the platform specific details so you don't have to.

If you know how pthreads work, this library will look familiar to you. If you are not familiar with pthreads, a good overview is available here

The Eina lock functions are grouped into several categories to handle different thread locking and synchronization methods:

Macro Definition Documentation

◆ EINA_MAIN_LOOP_CHECK_RETURN_VAL

#define EINA_MAIN_LOOP_CHECK_RETURN_VAL (   val)    do {} while(0)

Definition for the macro that doesn't do anything unless EINA_HAVE_DEBUG_THREADS is defined.

Parameters
[in]valThe value to be returned

Enumeration Type Documentation

◆ Eina_Lock_Result

Return codes for lock operations.

Enumerator
EINA_LOCK_FAIL 

Indicates that the lock operation failed.

EINA_LOCK_SUCCEED 

Indicates that the lock operation succeeded.

EINA_LOCK_DEADLOCK 

Indicates that the lock is deadlocked.

Function Documentation

◆ eina_lock_new()

static Eina_Bool eina_lock_new ( Eina_Lock mutex)
inlinestatic

Initializes a new Eina_Lock.

Parameters
[in]mutexThe Eina_Lock structure to be initialized
Returns
EINA_TRUE on success, EINA_FALSE otherwise

This function initializes an Eina_Lock with appropriate values. These values are platform dependent as is the structure of the Eina_Lock itself.

See also
eina_lock_free()
Examples
ecore_thread_example.c.

Referenced by ecore_init(), ecore_main_loop_thread_safe_call_sync(), ecore_thread_main_loop_begin(), eet_init(), eina_file_open(), and eio_init().

◆ eina_lock_recursive_new()

static Eina_Bool eina_lock_recursive_new ( Eina_Lock mutex)
inlinestatic

Initializes a new Eina_Lock that is recursive.

Parameters
[in]mutexThe Eina_Lock structure to be initialized
Returns
EINA_TRUE on success, EINA_FALSE otherwise

This function initializes an Eina_Lock with appropriate values. These values are platform dependent as is the structure of the Eina_Lock itself.

See also
eina_lock_new()
eina_lock_free()
Since
1.19

Referenced by eina_file_virtualize().

◆ eina_lock_free()

static void eina_lock_free ( Eina_Lock mutex)
inlinestatic

Deallocates an Eina_Lock.

This function deallocates an Eina_Lock allocated by eina_lock_new() and does any platform dependent cleanup that is required.

Parameters
[in]mutexThe Eina_Lock structure to be deallocated
See also
eina_lock_new()
Examples
ecore_thread_example.c.

Referenced by eet_shutdown(), eina_freeq_free(), elm_store_free(), and emotion_shutdown().

◆ eina_lock_take()

static Eina_Lock_Result eina_lock_take ( Eina_Lock mutex)
inlinestatic

Attempts to take a lock.

This function attempts to gain a lock on the indicated Eina_Lock. If the underlying Eina_Lock is locked already, this call can be blocked until the lock is released. This is appropriate in many cases, but consider using eina_lock_take_try() if you don't need to block.

Parameters
[in]mutexThe Eina_Lock to take
Returns
Returns EINA_LOCK_SUCCEED on success. If the operation fails because a deadlock condition exists, it returns EINA_LOCK_DEADLOCK. If some other condition causes the take to fail, EINA_LOCK_FAIL is returned.
See also
eina_lock_take_try()
eina_lock_release()
Examples
ecore_thread_example.c.

Referenced by ecore_fork_reset(), ecore_main_loop_thread_safe_call_sync(), ecore_thread_main_loop_begin(), ecore_thread_main_loop_end(), efreet_desktop_category_add(), efreet_desktop_category_del(), efreet_desktop_free(), efreet_desktop_new(), efreet_desktop_ref(), efreet_desktop_x_field_del(), efreet_desktop_x_field_get(), efreet_desktop_x_field_set(), efreet_util_path_to_file_id(), eina_debug_session_terminate(), eina_file_close(), eina_file_dup(), eina_file_flush(), eina_file_map_all(), eina_file_map_faulted(), eina_file_map_free(), eina_file_map_lines(), eina_file_map_new(), eina_file_map_populate(), eina_file_open(), eina_file_virtual_map_all(), eina_file_virtual_map_free(), eina_file_virtual_map_new(), eina_tmpstr_add_length(), eina_tmpstr_del(), eina_tmpstr_len(), eina_tmpstr_manage_new_length(), eio_memory_burst_limit_set(), elm_store_free(), and emotion_shutdown().

◆ eina_lock_take_try()

static Eina_Lock_Result eina_lock_take_try ( Eina_Lock mutex)
inlinestatic

Attempts to take a lock if possible.

This function attempts to gain a lock on the indicated Eina_Lock. Identical eina_lock_take(), but returns immediately if the lock is already taken.

Parameters
[in]mutexThe Eina_Lock to take
Returns
Returns EINA_LOCK_SUCCEED on success. If the operation fails because a deadlock condition exists, it returns EINA_LOCK_DEADLOCK. If some other condition causes the take to fail, EINA_LOCK_FAIL is returned.
See also
eina_lock_take()
eina_lock_release()
Examples
ecore_thread_example.c.

◆ eina_lock_release()

static Eina_Lock_Result eina_lock_release ( Eina_Lock mutex)
inlinestatic

◆ eina_lock_debug()

EINA_API void eina_lock_debug ( const Eina_Lock mutex)

Prints debug information about a lock.

This function prints debug information for mutex. The information is platform dependent. On POSIX systems it prints the address of mutex, lock state, thread number and a backtrace.

Parameters
[in]mutexThe Eina_Lock to print debug info for.
Note
If EINA_HAVE_DEBUG_THREADS is not defined, this function does nothing.
Since
1.19

◆ eina_condition_new()

static Eina_Bool eina_condition_new ( Eina_Condition cond,
Eina_Lock mutex 
)
inlinestatic

Initializes a new condition variable.

This function initializes an Eina_Condition structure and associates it with an existing lock.

Parameters
[in]condThe condition variable to create
[in]mutexThe Eina_Lock structure that controls access to this condition variable
Returns
EINA_TRUE on success, EINA_FALSE otherwise.

Condition variables are used to coordinate actions between threads. See Condition Variable Overview for an introduction to condition variables and their use.

See also
eina_condition_free()
Examples
ecore_thread_example.c.

Referenced by ecore_init(), ecore_main_loop_thread_safe_call_sync(), ecore_thread_main_loop_begin(), and eio_init().

◆ eina_condition_free()

static void eina_condition_free ( Eina_Condition cond)
inlinestatic

Deallocates a condition variable.

This function deallocates a condition variable and does any platform dependent cleanup that is required.

Parameters
[in]condThe condition variable to be deallocated.
See also
eina_condition_new()
Examples
ecore_thread_example.c.

◆ eina_condition_wait()

static Eina_Bool eina_condition_wait ( Eina_Condition cond)
inlinestatic

Causes a thread to wait until signaled by the condition.

This function makes a thread block until a signal is sent to it via cond.

Parameters
[in]condThe Eina_Condition upon which the thread waits.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_condition_timedwait()
Examples
ecore_thread_example.c.

Referenced by ecore_main_loop_thread_safe_call_sync(), ecore_thread_main_loop_begin(), and ecore_thread_main_loop_end().

◆ eina_condition_timedwait()

static Eina_Bool eina_condition_timedwait ( Eina_Condition cond,
double  t 
)
inlinestatic

Causes a thread to wait until signaled by the condition or a timeout is reached.

This function makes a thread block until either a signal is sent to it via cond or t seconds have passed.

Parameters
[in]condThe Eina_Condition upon which the thread waits.
[in]tThe maximum amount of time to wait, in seconds.
Returns
EINA_TRUE on success, EINA_FALSE otherwise. If the operation timed out, eina error will be set to ETIMEDOUT.
See also
eina_condition_wait()

◆ eina_condition_broadcast()

static Eina_Bool eina_condition_broadcast ( Eina_Condition cond)
inlinestatic

Signals all threads waiting for a condition.

This function sends a signal to all the threads waiting on the condition cond. If you know for sure that there is only one thread waiting, use eina_condition_signal() instead to gain a little optimization.

Parameters
[in]condThe Eina_Condition that signals all its waiting threads.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_condition_signal()

Referenced by ecore_thread_main_loop_end(), and eio_memory_burst_limit_set().

◆ eina_condition_signal()

static Eina_Bool eina_condition_signal ( Eina_Condition cond)
inlinestatic

Signals a thread waiting for a condition.

This function sends a signal to a thread waiting on the condition cond. If you do not know for sure that there is only one thread waiting, use eina_condition_broadcast() instead.

Parameters
[in]condThe Eina_Condition that signals its waiting thread.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
Note
If there is more than one thread waiting on this condition, one of them is signaled, but which one is undefined.
See also
eina_condition_broadcast()
Examples
ecore_thread_example.c.

◆ eina_rwlock_new()

static Eina_Bool eina_rwlock_new ( Eina_RWLock mutex)
inlinestatic

Initializes a new Eina_RWLock.

This function initializes an Eina_RWLock with appropriate values. These values are platform dependent as is the structure of the Eina_RWLock itself.

Parameters
[in]mutexThe Eina_RWLock to be initialized.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_rwlock_free()

◆ eina_rwlock_free()

static void eina_rwlock_free ( Eina_RWLock mutex)
inlinestatic

Deallocates an Eina_RWLock.

This function deallocates an Eina_RWLock and does any platform dependent cleanup that is required.

Parameters
[in]mutexThe Eina_RWLock structure to be deallocated.
See also
eina_rwlock_new()

◆ eina_rwlock_take_read()

static Eina_Lock_Result eina_rwlock_take_read ( Eina_RWLock mutex)
inlinestatic

Attempts to take a read lock.

This function attempts to gain a read lock on the indicated Eina_RWLock. If the Eina_RWLock is write locked, this call can be blocked until the lock is released.

Parameters
[in]mutexThe Eina_RWLock to take.
Returns
Returns EINA_LOCK_SUCCEED on success, EINA_LOCK_FAIL on failure.
Note
This function never returns EINA_LOCK_DEADLOCK.
See also
eina_rwlock_release()

Referenced by eet_dictionary_count(), and eet_dictionary_string_check().

◆ eina_rwlock_take_write()

static Eina_Lock_Result eina_rwlock_take_write ( Eina_RWLock mutex)
inlinestatic

Attempts to take a write lock.

This function attempts to gain a write lock on the indicated Eina_RWLock. If the Eina_RWLock is locked for reading or writing, this call can be blocked until the lock is released.

Parameters
[in]mutexThe Eina_RWLock to take.
Returns
Returns EINA_LOCK_SUCCEED on success, EINA_LOCK_FAIL on failure.
Note
This function never returns EINA_LOCK_DEADLOCK.
See also
eina_rwlock_release()

◆ eina_rwlock_release()

static Eina_Lock_Result eina_rwlock_release ( Eina_RWLock mutex)
inlinestatic

Releases a lock.

This function releases the lock on the indicated Eina_RWLock.

Parameters
[in]mutexThe Eina_RWLock to release.
Returns
Returns EINA_LOCK_SUCCEED on success. If it fails, EINA_LOCK_FAIL is returned.
See also
eina_rwlock_take_read()
eina_rwlock_take_write()

Referenced by eet_dictionary_count(), and eet_dictionary_string_check().

◆ eina_tls_new()

static Eina_Bool eina_tls_new ( Eina_TLS key)
inlinestatic

Initializes a new Eina_TLS, or thread level storage, to store thread specific data.

This function initializes an Eina_TLS with key but does not set a callback to deallocate key when the thread exits. The implementation is platform dependent as is the structure of the Eina_TLS itself.

Parameters
[in]keyThe Eina_TLS to be initialized.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
Note
use eina_tls_cb_new() instead to set a callback for deallocating key.
See also
eina_tls_cb_new()
eina_tls_free()

Referenced by evas_gl_new().

◆ eina_tls_cb_new()

static Eina_Bool eina_tls_cb_new ( Eina_TLS key,
Eina_TLS_Delete_Cb  delete_cb 
)
inlinestatic

Initializes a new Eina_TLS, or thread level storage, to store thread specific data.

This function initializes an Eina_TLS with key and sets a callback to deallocate key when the thread exits. The implementation is platform dependent as is the structure of the Eina_TLS itself.

Parameters
[in]keyThe Eina_TLS to be initialized.
[in]delete_cbA pointer to a function that deallocates key.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_tls_new()
eina_tls_free()

◆ eina_tls_free()

static void eina_tls_free ( Eina_TLS  key)
inlinestatic

Frees an allocated Eina_TLS.

This function frees the Eina_TLS key. The implementation is platform dependent.

Parameters
[in]keyThe Eina_TLS to be freed.
See also
eina_tls_new()
eina_tls_cb_new()

◆ eina_tls_get()

static void * eina_tls_get ( Eina_TLS  key)
inlinestatic

Gets the value in Eina_TLS for this thread.

This function gets a pointer to the data associated with Eina_TLS key for this thread. The implementation is platform dependent.

Parameters
[in]keyThe Eina_TLS to be retrieved.
Returns
A pointer to the data associated with key.
See also
eina_tls_set()

Referenced by eina_error_get(), evas_gl_current_evas_gl_get(), evas_gl_free(), and evas_module_task_cancelled().

◆ eina_tls_set()

static Eina_Bool eina_tls_set ( Eina_TLS  key,
const void *  data 
)
inlinestatic

Sets the value in Eina_TLS for this thread.

This function sets the value associated with key to the pointer to the data data. The implementation is platform dependent.

Parameters
[in]keyThe Eina_TLS to be set.
[in]dataA pointer to the data to be stored.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_tls_get()

Referenced by eina_error_set(), evas_gl_free(), evas_gl_make_current(), and evas_gl_new().

◆ eina_semaphore_new()

static Eina_Bool eina_semaphore_new ( Eina_Semaphore sem,
int  count_init 
)
inlinestatic

Initializes a new Eina_Semaphore.

This function initializes an unnamed Eina_Semaphore with appropriate values. These values are platform dependent.

Parameters
[in]semThe Eina_Semaphore to be initialized.
[in]count_initIndicates the initial count of threads waiting on this semaphore.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_semaphore_free()

Referenced by eina_thread_queue_new().

◆ eina_semaphore_free()

static Eina_Bool eina_semaphore_free ( Eina_Semaphore sem)
inlinestatic

Frees an allocated Eina_Semaphore.

This function frees the Eina_Semaphore sem. The implementation is platform dependent.

Parameters
[in]semThe Eina_Semaphore to be freed.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_semaphore_new()

Referenced by eina_thread_queue_free().

◆ eina_semaphore_lock()

static Eina_Bool eina_semaphore_lock ( Eina_Semaphore sem)
inlinestatic

Gets a lock on an Eina_Semaphore.

This function locks the Eina_Semaphore sem. The implementation is platform dependent.

Parameters
[in]semThe Eina_Semaphore to lock.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_semaphore_release()

◆ eina_semaphore_release()

static Eina_Bool eina_semaphore_release ( Eina_Semaphore sem,
int  count_release 
)
inlinestatic

Releases a lock on an Eina_Semaphore.

This function releases a lock on the Eina_Semaphore sem. The implementation is platform dependent.

Parameters
[in]semThe Eina_Semaphore to release.
[in]count_releaseNot used.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_semaphore_lock()

◆ eina_barrier_new()

static Eina_Bool eina_barrier_new ( Eina_Barrier barrier,
int  needed 
)
inlinestatic

Initializes a new Eina_Barrier.

This function initializes a new Eina_Barrier. It sets the needed flag to the value of needed, sets the barrier's count member to 0 and creates new Eina_Lock and Eina_Condition objects for the barrier.

Parameters
[in]barrierThe Eina_Barrier to be initialized.
[in]neededThe number of thread waits that causes this barrier to be reset.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
See also
eina_barrier_free()

◆ eina_barrier_free()

static void eina_barrier_free ( Eina_Barrier barrier)
inlinestatic

Frees an allocated Eina_Barrier.

This function frees the Eina_Barrier barrier.

Parameters
[in]barrierThe Eina_Barrier to be freed.
See also
eina_barrier_new()

◆ eina_barrier_wait()

static Eina_Bool eina_barrier_wait ( Eina_Barrier barrier)
inlinestatic

Increments the count of threads that are waiting on barrier.

When the count of threads reaches the needed value for the barrier, all waiting threads are notified via eina_condition_broadcast().

Parameters
[in]barrierThe Eina_Barrier to be incremented.
Returns
EINA_TRUE on success, else EINA_FALSE otherwise.

◆ eina_spinlock_new()

static Eina_Bool eina_spinlock_new ( Eina_Spinlock spinlock)
inlinestatic

Initializes a new Eina_Spinlock.

This function initializes a new Eina_Spinlock, if spinlocks are available. If spinlocks are not available, it creates a new Eina_Lock.

Parameters
[in]spinlockThe Eina_Spinlock to be initialized.
Returns
EINA_TRUE on success, EINA_FALSE otherwise.
Note
Spinlocks are only implemented on the POSIX platform and are only available if EINA_HAVE_POSIX_SPINLOCK is defined. You get a new Eina_Lock on All other platforms.
See also
eina_spinlock_free()

Referenced by eina_thread_queue_new(), and eio_init().

◆ eina_spinlock_take()

static Eina_Lock_Result eina_spinlock_take ( Eina_Spinlock spinlock)
inlinestatic

Attempts to take a spinlock.

This function attempts to gain a lock on the indicated Eina_Spinlock. If the underlying Eina_Spinlock is locked already, this call can be blocked until the lock is released. This is appropriate in many cases, but consider using eina_spinlock_take_try() if you don't need to block.

Parameters
[in]spinlockThe Eina_Spinlock to take.
Returns
Returns EINA_LOCK_SUCCEED on success. If the operation fails because a deadlock condition exists, it returns EINA_LOCK_DEADLOCK. If some other condition causes the take to fail, EINA_LOCK_FAIL is returned.
See also
eina_spinlock_take_try()
eina_spinlock_release()

Referenced by eina_debug_session_send(), eina_debug_timer_add(), eina_debug_timer_del(), eina_error_msg_get(), eina_evlog_start(), eina_evlog_steal(), eina_evlog_stop(), eina_file_statgen_disable(), eina_file_statgen_enable(), eina_file_statgen_get(), eina_file_statgen_next(), eina_rectangle_free(), eina_rectangle_new(), eina_safepointer_register(), eina_safepointer_unregister(), eina_stringshare_add_length(), eina_stringshare_del(), eina_stringshare_ref(), eina_thread_queue_poll(), eina_thread_queue_send(), eina_thread_queue_wait(), and evas_async_events_put().

◆ eina_spinlock_take_try()

static Eina_Lock_Result eina_spinlock_take_try ( Eina_Spinlock spinlock)
inlinestatic

Attempts to take a spinlock if possible.

This function attempts to gain a lock on the indicated Eina_Spinlock. Identical to eina_lock_take(), but returns immediately if the lock is already taken.

Parameters
[in]spinlockThe Eina_Spinlock to take.
Returns
Returns EINA_LOCK_SUCCEED on success. If the operation fails because a deadlock condition exists, it returns EINA_LOCK_DEADLOCK. If some other condition causes the take to fail, EINA_LOCK_FAIL is returned.
See also
eina_spinlock_take_try()
eina_spinlock_release()

◆ eina_spinlock_release()

static Eina_Lock_Result eina_spinlock_release ( Eina_Spinlock spinlock)
inlinestatic

◆ eina_spinlock_free()

static void eina_spinlock_free ( Eina_Spinlock spinlock)
inlinestatic

Deallocates an Eina_Spinlock.

This function deallocates an Eina_Spinlock and does any platform dependent cleanup that is required.

Parameters
[in]spinlockThe Eina_Spinlock to be deallocated.

Referenced by eina_thread_queue_free().