evas-stacking.c

 
#ifdef HAVE_CONFIG_H
#include "config.h"
#else
#define PACKAGE_EXAMPLES_DIR "."
#endif
 
#include <Ecore.h>
#include <Ecore_Evas.h>
 
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
 
#define WIDTH  320
#define HEIGHT 320
 
struct test_data
{
   Ecore_Evas  *ee;
   Evas        *canvas;
   Evas_Object *bg;
   Evas_Object *rects[3]; /* red, green, blue */
   int          layers[3]; /* default, below it, above it */
   int          cur_rect, cur_layer;
};
 
static struct test_data d = {0};
 
static const char *commands = \
  "commands are:\n"
  "\tc - change the target rectangle to operate on\n"
  "\ta - stack target rectangle one level above\n"
  "\tb - stack target rectangle one level below\n"
  "\tt - stack target rectangle up to the top of its layer\n"
  "\tm - stack target rectangle down to the bottom of its layer\n"
  "\tp - toggle target rectangle's 'pass events' property\n"
  "\tr - toggle target rectangle's 'repeat events' property\n"
  "\ts - print current stacking information\n"
  "\tl - change background rectangle's layer\n"
  "\th - print help\n";
 
static const char *
_name_get(Evas_Object *o)
{
   const char *s = evas_object_name_get(o);
   if (!s) s = "(null)";
   return s;
}
 
static void
_on_mouse_down(void        *data EINA_UNUSED,
               Evas        *evas EINA_UNUSED,
               Evas_Object *o,
               void        *einfo EINA_UNUSED)
{
   printf("Mouse down on rectangle %s!\n", _name_get(o));
}
 
/* Keep the example's window size in sync with the background image's size */
static void
_canvas_resize_cb(Ecore_Evas *ee)
{
   int w, h;
 
   ecore_evas_geometry_get(ee, NULL, NULL, &w, &h);
   evas_object_resize(d.bg, w, h);
}
 
/* use the following commands to interact with this example - 'h' is
 * the key for help */
static void
_on_keydown(void        *data EINA_UNUSED,
            Evas        *evas EINA_UNUSED,
            Evas_Object *o EINA_UNUSED,
            void        *einfo)
{
   Evas_Event_Key_Down *ev = einfo;
   const char *name = _name_get(d.rects[d.cur_rect]);
 
   if (strcmp(ev->key, "h") == 0)  /* print help */
     {
        printf("%s\n", commands);
        return;
     }
 
   if (strcmp(ev->key, "s") == 0)  /* get status of the
                                        * rectangles WRT size
                                        * hints */
     {
        Evas_Object *rect;
 
        printf("Order of stacking, from top to bottom, is: ");
 
        rect = evas_object_top_get(evas);
        printf("%s", _name_get(rect));
 
        rect = evas_object_below_get(rect);
        while (rect)
          {
             printf(", %s", _name_get(rect));
             rect = evas_object_below_get(rect);
          }
 
        printf(".\n");
 
        printf("Current target rectangle is %s\n",
               _name_get(d.rects[d.cur_rect]));
 
        printf("Background rectangle's layer is %d\n",
               evas_object_layer_get(d.bg));
 
        return;
     }
 
   if (strcmp(ev->key, "l") == 0)  /* change background rectangle's layer */
     {
        d.cur_layer = (d.cur_layer + 1) % 3;
        evas_object_layer_set(d.bg, d.layers[d.cur_layer]);
 
        printf("Changing background rectangle's layer to %d\n",
               d.layers[d.cur_layer]);
        return;
     }
 
   if (strcmp(ev->key, "c") == 0)  /* change rectangle to operate on */
     {
        d.cur_rect = (d.cur_rect + 1) % 3;
 
        printf("Changing target rectangle to the %s one\n",
               _name_get(d.rects[d.cur_rect]));
        return;
     }
 
   if (strcmp(ev->key, "t") == 0)  /* bring target to top */
     {
        Evas_Object *neighbour;
 
        evas_object_raise(d.rects[d.cur_rect]);
 
        printf("%s rectangle was re-stacked to the top if its layer\n",
               name);
 
        neighbour = evas_object_below_get(d.rects[d.cur_rect]);
        printf("Below of %s rect is %s\n", name,
               neighbour ? _name_get(neighbour) : "no object");
        return;
     }
 
   if (strcmp(ev->key, "m") == 0)  /* bring target to bottom */
     {
        Evas_Object *neighbour;
 
        evas_object_lower(d.rects[d.cur_rect]);
 
        printf("%s rectangle was re-stacked to the bottom if its layer\n",
               name);
 
        neighbour = evas_object_below_get(d.rects[d.cur_rect]);
        printf("Below of %s rect is %s\n", name,
               neighbour ? _name_get(neighbour) : "no object");
        return;
     }
 
   if (strcmp(ev->key, "p") == 0)  /* toggle pass events */
     {
        Eina_Bool pass = evas_object_pass_events_get(d.rects[d.cur_rect]);
 
        evas_object_pass_events_set(d.rects[d.cur_rect], !pass);
 
        printf("%s rectangle is now set to%s pass (ignore) events\n",
               name, pass ? " NOT" : "");
 
        return;
     }
 
   if (strcmp(ev->key, "r") == 0)  /* toggle repeat events */
     {
        Eina_Bool repeat = evas_object_repeat_events_get(d.rects[d.cur_rect]);
 
        evas_object_repeat_events_set(d.rects[d.cur_rect], !repeat);
 
        printf("%s rectangle is now set to%s repeat events\n",
               name, repeat ? " NOT" : "");
 
        return;
     }
 
   if (strcmp(ev->key, "a") == 0)  /* stack target above */
     {
        Evas_Object *neighbour = evas_object_above_get(d.rects[d.cur_rect]);
 
        if (!neighbour || (evas_object_layer_get(d.rects[d.cur_rect]) !=
                           evas_object_layer_get(neighbour)))
          return;
 
        evas_object_stack_above(d.rects[d.cur_rect], neighbour);
 
        printf("%s rectangle was re-stacked one level above\n", name);
 
        neighbour = evas_object_above_get(d.rects[d.cur_rect]);
        printf("Above of %s rect is %s\n", name,
               neighbour ? _name_get(neighbour) : "no object");
 
        neighbour = evas_object_below_get(d.rects[d.cur_rect]);
        printf("Below of %s rect is %s\n", name,
               neighbour ? _name_get(neighbour) : "no object");
        return;
     }
 
   if (strcmp(ev->key, "b") == 0)  /* stack target below */
     {
        Evas_Object *neighbour = evas_object_below_get(d.rects[d.cur_rect]);
 
        if (!neighbour || (evas_object_layer_get(d.rects[d.cur_rect]) !=
                           evas_object_layer_get(neighbour)))
          return;
 
        evas_object_stack_below(d.rects[d.cur_rect], neighbour);
 
        printf("%s rectangle was re-stacked one level below\n", name);
 
        neighbour = evas_object_above_get(d.rects[d.cur_rect]);
        printf("Above of %s rect is %s\n", name,
               neighbour ? _name_get(neighbour) : "no object");
 
        neighbour = evas_object_below_get(d.rects[d.cur_rect]);
 
        printf("Below of %s rect is %s\n", name,
               neighbour ? _name_get(neighbour) : "no object");
        return;
     }
}
 
static void
_on_destroy(Ecore_Evas *ee EINA_UNUSED)
{
   ecore_main_loop_quit();
}
 
int
main(void)
{
   if (!ecore_evas_init())
     return EXIT_FAILURE;
 
   /* this will give you a window with an Evas canvas under the first
    * engine available */
   d.ee = ecore_evas_new(NULL, 0, 0, WIDTH, HEIGHT, NULL);
   if (!d.ee)
     goto error;
 
   ecore_evas_callback_destroy_set(d.ee, _on_destroy);
   ecore_evas_callback_resize_set(d.ee, _canvas_resize_cb);
   ecore_evas_show(d.ee);
 
   /* the canvas pointer, de facto */
   d.canvas = ecore_evas_get(d.ee);
 
   d.bg = evas_object_rectangle_add(d.canvas);
   evas_object_name_set(d.bg, "background");  /* white bg */
   evas_object_color_set(d.bg, 255, 255, 255, 255);
   evas_object_move(d.bg, 0, 0);
   evas_object_resize(d.bg, WIDTH, HEIGHT);
 
   d.layers[0] = evas_object_layer_get(d.bg);
   d.layers[1] = d.layers[0] - 1;
   d.layers[2] = d.layers[0] + 1;
 
   d.cur_layer = 1;
   evas_object_layer_set(d.bg, d.layers[d.cur_layer]);  /* let's start with it
                                                         * below the default
                                                         * layer */
 
   evas_object_show(d.bg);
 
   evas_object_focus_set(d.bg, EINA_TRUE);
   evas_object_event_callback_add(
     d.bg, EVAS_CALLBACK_KEY_DOWN, _on_keydown, NULL);
 
   d.rects[2] = evas_object_rectangle_add(d.canvas);
   evas_object_name_set(d.rects[2], "blue");
   evas_object_color_set(d.rects[2], 0, 0, 255, 255);
 
   evas_object_resize(d.rects[2], WIDTH / 2.2, WIDTH / 2.2);
   evas_object_move(d.rects[2], WIDTH / 6, WIDTH / 4.5);
   evas_object_show(d.rects[2]);
   evas_object_event_callback_add(
     d.rects[2], EVAS_CALLBACK_MOUSE_DOWN, _on_mouse_down, NULL);
 
   d.rects[1] = evas_object_rectangle_add(d.canvas);
   evas_object_name_set(d.rects[1], "green");
   evas_object_color_set(d.rects[1], 0, 255, 0, 255);
 
   evas_object_resize(d.rects[1], WIDTH / 2.2, WIDTH / 2.2);
   evas_object_move(d.rects[1], WIDTH / 2.5, WIDTH / 7);
   evas_object_show(d.rects[1]);
   evas_object_event_callback_add(
     d.rects[1], EVAS_CALLBACK_MOUSE_DOWN, _on_mouse_down, NULL);
 
   d.rects[0] = evas_object_rectangle_add(d.canvas);
   evas_object_name_set(d.rects[0], "red");
   evas_object_color_set(d.rects[0], 255, 0, 0, 255);
 
   evas_object_resize(d.rects[0], WIDTH / 2.2, WIDTH / 2.2);
   evas_object_move(d.rects[0], WIDTH / 3, WIDTH / 2.5);
   evas_object_show(d.rects[0]);
   evas_object_event_callback_add(
     d.rects[0], EVAS_CALLBACK_MOUSE_DOWN, _on_mouse_down, NULL);
 
   printf("%s\n", commands);
   ecore_main_loop_begin();
 
   ecore_evas_shutdown();
   return 0;
 
error:
   fprintf(stderr, "error: Requires at least one Evas engine built and linked"
                   " to ecore-evas for this example to run properly.\n");
   return -1;
}