Interface SocketOptions

Field Details

• TCP_NODELAY

  @Native static final int TCP_NODELAY

  Disable Nagle's algorithm for this connection. Written data to the network is not buffered pending acknowledgement of previously written data.

  Valid for TCP only: SocketImpl.

  See Also:

  • Socket.setTcpNoDelay(boolean)
  • Socket.getTcpNoDelay()
  • Constant Field Values

• SO_BINDADDR

  @Native static final int SO_BINDADDR

  Fetch the local address binding of a socket (this option cannot be "set" only "gotten", since sockets are bound at creation time, and so the locally bound address cannot be changed). The default local address of a socket is INADDR_ANY, meaning any local address on a multi-homed host. A multi-homed host can use this option to accept connections to only one of its addresses (in the case of a ServerSocket or DatagramSocket), or to specify its return address to the peer (for a Socket or DatagramSocket). The parameter of this option is an InetAddress.

  This option must be specified in the constructor.

  Valid for: SocketImpl, DatagramSocketImpl

  See Also:

  • Socket.getLocalAddress()
  • DatagramSocket.getLocalAddress()
  • Constant Field Values

• SO_REUSEADDR

  @Native static final int SO_REUSEADDR

  Sets SO_REUSEADDR for a socket. This is used only for MulticastSockets in java, and it is set by default for MulticastSockets.

  Valid for: DatagramSocketImpl

  See Also:

  • Constant Field Values

• SO_REUSEPORT

  @Native static final int SO_REUSEPORT

  Sets SO_REUSEPORT for a socket. This option enables and disables the ability to have multiple sockets listen to the same address and port.

  Valid for: SocketImpl, DatagramSocketImpl

  Since:

  9

  See Also:

  • StandardSocketOptions.SO_REUSEPORT
  • Constant Field Values

• SO_BROADCAST

  @Native static final int SO_BROADCAST

  Sets SO_BROADCAST for a socket. This option enables and disables the ability of the process to send broadcast messages. It is supported for only datagram sockets and only on networks that support the concept of a broadcast message (e.g. Ethernet, token ring, etc.), and it is set by default for DatagramSockets.

  Since:

  1.4

  See Also:

  • Constant Field Values

• IP_MULTICAST_IF

  @Native static final int IP_MULTICAST_IF

  Set which outgoing interface on which to send multicast packets. Useful on hosts with multiple network interfaces, where applications want to use other than the system default. Takes/returns an InetAddress.

  Valid for Multicast: DatagramSocketImpl

  See Also:

  • MulticastSocket.setInterface(InetAddress)
  • MulticastSocket.getInterface()
  • Constant Field Values

• IP_MULTICAST_IF2

  @Native static final int IP_MULTICAST_IF2

  Same as above. This option is introduced so that the behaviour with IP_MULTICAST_IF will be kept the same as before, while this new option can support setting outgoing interfaces with either IPv4 and IPv6 addresses. NOTE: make sure there is no conflict with this

  Since:

  1.4

  See Also:

  • MulticastSocket.setNetworkInterface(NetworkInterface)
  • MulticastSocket.getNetworkInterface()
  • Constant Field Values

• IP_MULTICAST_LOOP

  @Native static final int IP_MULTICAST_LOOP

  This option enables or disables local loopback of multicast datagrams. This option is enabled by default for Multicast Sockets.

  Since:

  1.4

  See Also:

  • Constant Field Values

• IP_TOS

  @Native static final int IP_TOS

  This option sets the type-of-service or traffic class field in the IP header for a TCP or UDP socket.

  Since:

  1.4

  See Also:

  • Constant Field Values

• SO_LINGER

  @Native static final int SO_LINGER

  Specify a linger-on-close timeout. This option disables/enables immediate return from a close() of a TCP Socket. Enabling this option with a non-zero Integer timeout means that a close() will block pending the transmission and acknowledgement of all data written to the peer, at which point the socket is closed gracefully. Upon reaching the linger timeout, the socket is closed forcefully, with a TCP RST. Enabling the option with a timeout of zero does a forceful close immediately. If the specified timeout value exceeds 65,535 it will be reduced to 65,535.

  Valid only for TCP: SocketImpl

  See Also:

  • Socket.setSoLinger(boolean, int)
  • Socket.getSoLinger()
  • Constant Field Values

• SO_TIMEOUT

  @Native static final int SO_TIMEOUT

  Set a timeout on blocking Socket operations:

   ServerSocket.accept();
   SocketInputStream.read();
   DatagramSocket.receive();
   

  The option must be set prior to entering a blocking operation to take effect. If the timeout expires and the operation would continue to block, java.io.InterruptedIOException is raised. The Socket is not closed in this case.

  Valid for all sockets: SocketImpl, DatagramSocketImpl

  See Also:

  • Socket.setSoTimeout(int)
  • ServerSocket.setSoTimeout(int)
  • DatagramSocket.setSoTimeout(int)
  • Constant Field Values

• SO_SNDBUF

  @Native static final int SO_SNDBUF

  Set a hint the size of the underlying buffers used by the platform for outgoing network I/O. When used in set, this is a suggestion to the kernel from the application about the size of buffers to use for the data to be sent over the socket. When used in get, this must return the size of the buffer actually used by the platform when sending out data on this socket. Valid for all sockets: SocketImpl, DatagramSocketImpl

  See Also:

  • Socket.setSendBufferSize(int)
  • Socket.getSendBufferSize()
  • DatagramSocket.setSendBufferSize(int)
  • DatagramSocket.getSendBufferSize()
  • Constant Field Values

• SO_RCVBUF

  @Native static final int SO_RCVBUF

  Set a hint the size of the underlying buffers used by the platform for incoming network I/O. When used in set, this is a suggestion to the kernel from the application about the size of buffers to use for the data to be received over the socket. When used in get, this must return the size of the buffer actually used by the platform when receiving in data on this socket. Valid for all sockets: SocketImpl, DatagramSocketImpl

  See Also:

  • Socket.setReceiveBufferSize(int)
  • Socket.getReceiveBufferSize()
  • DatagramSocket.setReceiveBufferSize(int)
  • DatagramSocket.getReceiveBufferSize()
  • Constant Field Values

• SO_KEEPALIVE

  @Native static final int SO_KEEPALIVE

  When the keepalive option is set for a TCP socket and no data has been exchanged across the socket in either direction for 2 hours (NOTE: the actual value is implementation dependent), TCP automatically sends a keepalive probe to the peer. This probe is a TCP segment to which the peer must respond. One of three responses is expected: 1. The peer responds with the expected ACK. The application is not notified (since everything is OK). TCP will send another probe following another 2 hours of inactivity. 2. The peer responds with an RST, which tells the local TCP that the peer host has crashed and rebooted. The socket is closed. 3. There is no response from the peer. The socket is closed. The purpose of this option is to detect if the peer host crashes. Valid only for TCP socket: SocketImpl

  See Also:

  • Socket.setKeepAlive(boolean)
  • Socket.getKeepAlive()
  • Constant Field Values

• SO_OOBINLINE

  @Native static final int SO_OOBINLINE

  When the OOBINLINE option is set, any TCP urgent data received on the socket will be received through the socket input stream. When the option is disabled (which is the default) urgent data is silently discarded.

  See Also:

  • Socket.setOOBInline(boolean)
  • Socket.getOOBInline()
  • Constant Field Values