Internal system-dependent API available on UNIX and Windows. More...

Data Structures
struct	DBusSocket
	Socket interface. More...

struct	DBusAtomic
	An atomic integer safe to increment or decrement from multiple threads. More...

struct	DBusPollFD

struct	DBusStat
	Portable struct with stat() results. More...

Macros
#define	DBUS_PID_UNSET ((dbus_pid_t) -1)
	an invalid PID used to represent an uninitialized dbus_pid_t field More...

#define	DBUS_UID_UNSET ((dbus_uid_t) -1)
	an invalid UID used to represent an uninitialized dbus_uid_t field More...

#define	DBUS_GID_UNSET ((dbus_gid_t) -1)
	an invalid GID used to represent an uninitialized dbus_gid_t field More...

#define	DBUS_PID_FORMAT "%lu"
	an appropriate printf format for dbus_pid_t More...

#define	DBUS_UID_FORMAT "%lu"
	an appropriate printf format for dbus_uid_t More...

#define	DBUS_GID_FORMAT "%lu"
	an appropriate printf format for dbus_gid_t More...

#define	DBUS_SOCKET_FORMAT "d"

#define	DBUS_SOCKET_INIT { -1 }

#define	DBUS_POLLABLE_FORMAT "d"

#define	_DBUS_POLLIN 0x0001
	There is data to read. More...

#define	_DBUS_POLLPRI 0x0002
	There is urgent data to read. More...

#define	_DBUS_POLLOUT 0x0004
	Writing now will not block. More...

#define	_DBUS_POLLERR 0x0008
	Error condition. More...

#define	_DBUS_POLLHUP 0x0010
	Hung up. More...

#define	_DBUS_POLLNVAL 0x0020
	Invalid request: fd not open. More...

#define	_DBUS_BYTE_OF_PRIMITIVE(p, i) (((const char*)&(p))[(i)])
	Casts a primitive C type to a byte array and then indexes a particular byte of the array. More...

#define	_DBUS_DOUBLES_BITWISE_EQUAL(a, b)
	On x86 there is an 80-bit FPU, and if you do "a == b" it may have a or b in an 80-bit register, thus failing to compare the two 64-bit doubles for bitwise equality. More...

#define	DBUS_DEFAULT_MESSAGE_UNIX_FDS 16

Typedefs
typedef unsigned long	dbus_pid_t
	A process ID. More...

typedef unsigned long	dbus_uid_t
	A user ID. More...

typedef unsigned long	dbus_gid_t
	A group ID. More...

typedef struct DBusAtomic	DBusAtomic
	Opaque type representing an atomically-modifiable integer that can be used from multiple threads. More...

typedef int	DBusPollable

typedef struct DBusDirIter	DBusDirIter
	Opaque type for reading a directory listing. More...

typedef union DBusGUID	DBusGUID
	Type representing a universally unique ID. More...

typedef struct DBusRLimit	DBusRLimit

Enumerations
enum	DBusCredentialsAddFlags { DBUS_CREDENTIALS_ADD_FLAGS_USER_DATABASE = (1 << 0) , DBUS_CREDENTIALS_ADD_FLAGS_NONE = 0 }

enum	DBusLogFlags { DBUS_LOG_FLAGS_STDERR = (1 << 0) , DBUS_LOG_FLAGS_SYSTEM_LOG = (1 << 1) }

enum	DBusSystemLogSeverity { DBUS_SYSTEM_LOG_INFO , DBUS_SYSTEM_LOG_WARNING , DBUS_SYSTEM_LOG_SECURITY , DBUS_SYSTEM_LOG_ERROR }

Functions
void	_dbus_abort (void)
	Aborts the program with SIGABRT (dumping core). More...

const char *	_dbus_getenv (const char *varname)
	Wrapper for getenv(). More...

dbus_bool_t	_dbus_clearenv (void)
	Wrapper for clearenv(). More...

dbus_bool_t	_dbus_split_paths_and_append (DBusString dirs, const char suffix, DBusList **dir_list)
	Split paths into a list of char strings. More...

dbus_bool_t	_dbus_check_setuid (void)
	NOTE: If you modify this function, please also consider making the corresponding change in GLib. More...

char **	_dbus_get_environment (void)
	Gets a NULL-terminated list of key=value pairs from the environment. More...

dbus_bool_t	_dbus_set_socket_nonblocking (DBusSocket fd, DBusError *error)
	Sets a file descriptor to be nonblocking. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_close_socket (DBusSocket fd, DBusError *error)
	Closes a socket. More...

DBUS_PRIVATE_EXPORT int	_dbus_read_socket (DBusSocket fd, DBusString *buffer, int count)
	Like _dbus_read(), but only works on sockets so is available on Windows. More...

DBUS_PRIVATE_EXPORT int	_dbus_write_socket (DBusSocket fd, const DBusString *buffer, int start, int len)
	Like _dbus_write(), but only supports sockets and is thus available on Windows. More...

int	_dbus_write_socket_two (DBusSocket fd, const DBusString buffer1, int start1, int len1, const DBusString buffer2, int start2, int len2)
	Like _dbus_write_two() but only works on sockets and is thus available on Windows. More...

int	_dbus_read_socket_with_unix_fds (DBusSocket fd, DBusString buffer, int count, int fds, unsigned int *n_fds)
	Like _dbus_read_socket() but also tries to read unix fds from the socket. More...

DBUS_PRIVATE_EXPORT int	_dbus_write_socket_with_unix_fds (DBusSocket fd, const DBusString buffer, int start, int len, const int fds, int n_fds)

int	_dbus_write_socket_with_unix_fds_two (DBusSocket fd, const DBusString buffer1, int start1, int len1, const DBusString buffer2, int start2, int len2, const int *fds, int n_fds)

DBusSocket	_dbus_connect_tcp_socket (const char host, const char port, const char family, DBusError error)
	Creates a socket and connects to a socket at the given host and port. More...

DBusSocket	_dbus_connect_tcp_socket_with_nonce (const char host, const char port, const char family, const char noncefile, DBusError *error)

int	_dbus_listen_tcp_socket (const char host, const char port, const char family, DBusString retport, const char retfamily, DBusSocket fds_p, DBusError *error)
	Creates a socket and binds it to the given path, then listens on the socket. More...

DBusSocket	_dbus_accept (DBusSocket listen_fd)
	Accepts a connection on a listening socket. More...

dbus_bool_t	_dbus_read_credentials_socket (DBusSocket client_fd, DBusCredentials credentials, DBusError error)
	Reads a single byte which must be nul (an error occurs otherwise), and reads unix credentials if available. More...

dbus_bool_t	_dbus_send_credentials_socket (DBusSocket server_fd, DBusError *error)
	Sends a single nul byte with our UNIX credentials as ancillary data. More...

dbus_bool_t	_dbus_credentials_add_from_user (DBusCredentials credentials, const DBusString username, DBusCredentialsAddFlags flags, DBusError *error)
	Adds the credentials corresponding to the given username. More...

dbus_bool_t	_dbus_credentials_add_from_current_process (DBusCredentials *credentials)
	Adds the most important credentials of the current process (the uid and pid) to the passed-in credentials object. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_append_user_from_current_process (DBusString *str)
	Append to the string the identity we would like to have when we authenticate, on UNIX this is the current process UID and on Windows something else, probably a Windows SID string. More...

dbus_bool_t	_dbus_parse_unix_user_from_config (const DBusString username, dbus_uid_t uid_p)
	Parse a UNIX user from the bus config file. More...

dbus_bool_t	_dbus_parse_unix_group_from_config (const DBusString groupname, dbus_gid_t gid_p)
	Parse a UNIX group from the bus config file. More...

dbus_bool_t	_dbus_unix_groups_from_uid (dbus_uid_t uid, dbus_gid_t *group_ids, int n_group_ids, DBusError *error)
	Gets all groups corresponding to the given UNIX user ID. More...

dbus_bool_t	_dbus_unix_user_is_at_console (dbus_uid_t uid, DBusError *error)
	Checks to see if the UNIX user ID is at the console. More...

dbus_bool_t	_dbus_unix_user_is_process_owner (dbus_uid_t uid)
	Checks to see if the UNIX user ID matches the UID of the process. More...

dbus_bool_t	_dbus_windows_user_is_process_owner (const char *windows_sid)
	Checks to see if the Windows user SID matches the owner of the process. More...

dbus_bool_t	_dbus_append_keyring_directory_for_credentials (DBusString directory, DBusCredentials credentials)
	Appends the directory in which a keyring for the given credentials should be stored. More...

void	_dbus_daemon_unpublish_session_bus_address (void)
	Clear the platform-specific centralized location where the session bus address is published. More...

dbus_bool_t	_dbus_socket_can_pass_unix_fd (DBusSocket fd)
	Checks whether file descriptors may be passed via the socket. More...

DBUS_PRIVATE_EXPORT dbus_int32_t	_dbus_atomic_inc (DBusAtomic *atomic)
	Atomically increments an integer. More...

DBUS_PRIVATE_EXPORT dbus_int32_t	_dbus_atomic_dec (DBusAtomic *atomic)
	Atomically decrement an integer. More...

DBUS_PRIVATE_EXPORT dbus_int32_t	_dbus_atomic_get (DBusAtomic *atomic)
	Atomically get the value of an integer. More...

DBUS_PRIVATE_EXPORT void	_dbus_atomic_set_zero (DBusAtomic *atomic)
	Atomically set the value of an integer to 0. More...

DBUS_PRIVATE_EXPORT void	_dbus_atomic_set_nonzero (DBusAtomic *atomic)
	Atomically set the value of an integer to something nonzero. More...

DBUS_PRIVATE_EXPORT int	_dbus_poll (DBusPollFD *fds, int n_fds, int timeout_milliseconds)
	Wrapper for poll(). More...

DBUS_PRIVATE_EXPORT void	_dbus_sleep_milliseconds (int milliseconds)
	Sleeps the given number of milliseconds. More...

DBUS_PRIVATE_EXPORT void	_dbus_get_monotonic_time (long tv_sec, long tv_usec)
	Get current time, as in gettimeofday(). More...

DBUS_PRIVATE_EXPORT void	_dbus_get_real_time (long tv_sec, long tv_usec)
	Get current time, as in gettimeofday(). More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_create_directory (const DBusString filename, DBusError error)
	directory interface More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_ensure_directory (const DBusString filename, DBusError error)
	Creates a directory; succeeds if the directory is created or already existed. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_delete_directory (const DBusString filename, DBusError error)
	Removes a directory; Directory must be empty. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_concat_dir_and_file (DBusString dir, const DBusString next_component)
	Appends the given filename to the given directory. More...

dbus_bool_t	_dbus_string_get_dirname (const DBusString filename, DBusString dirname)
	Get the directory name from a complete filename. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_path_is_absolute (const DBusString *filename)
	Checks whether the filename is an absolute path. More...

dbus_bool_t	_dbus_get_standard_session_servicedirs (DBusList **dirs)
	Returns the standard directories for a session bus to look for service activation files. More...

dbus_bool_t	_dbus_get_standard_system_servicedirs (DBusList **dirs)
	Returns the standard directories for a system bus to look for service activation files. More...

dbus_bool_t	_dbus_set_up_transient_session_servicedirs (DBusList *dirs, DBusError error)
	Returns the standard directories for a session bus to look for transient service activation files. More...

dbus_bool_t	_dbus_get_system_config_file (DBusString *str)
	Get the absolute path of the system.conf file (there is no system bus on Windows so this can just return FALSE and print a warning or something) More...

dbus_bool_t	_dbus_get_session_config_file (DBusString *str)
	Get the absolute path of the session.conf file. More...

DBusDirIter *	_dbus_directory_open (const DBusString filename, DBusError error)
	Open a directory to iterate over. More...

dbus_bool_t	_dbus_directory_get_next_file (DBusDirIter iter, DBusString filename, DBusError *error)
	Get next file in the directory. More...

void	_dbus_directory_close (DBusDirIter *iter)
	Closes a directory iteration. More...

dbus_bool_t	_dbus_check_dir_is_private_to_user (DBusString dir, DBusError error)
	Checks to make sure the given directory is private to the user. More...

DBUS_PRIVATE_EXPORT const char *	_dbus_get_tmpdir (void)
	Gets the temporary files directory by inspecting the environment variables TMPDIR, TMP, and TEMP in that order. More...

_DBUS_WARN_UNUSED_RESULT dbus_bool_t	_dbus_generate_random_bytes_buffer (char buffer, int n_bytes, DBusError error)
	Random numbers. More...

dbus_bool_t	_dbus_generate_random_bytes (DBusString str, int n_bytes, DBusError error)
	Generates the given number of securely random bytes, using the best mechanism we can come up with. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_generate_random_ascii (DBusString str, int n_bytes, DBusError error)
	Generates the given number of random bytes, where the bytes are chosen from the alphanumeric ASCII subset. More...

DBUS_PRIVATE_EXPORT const char *	_dbus_error_from_errno (int error_number)
	Converts a UNIX errno, or Windows errno or WinSock error value into a DBusError name. More...

DBUS_PRIVATE_EXPORT const char *	_dbus_error_from_system_errno (void)
	Converts the current system errno value into a DBusError name. More...

int	_dbus_get_low_level_socket_errno (void)

int	_dbus_save_socket_errno (void)

void	_dbus_restore_socket_errno (int saved_errno)

void	_dbus_set_errno_to_zero (void)
	Assign 0 to the global errno variable. More...

dbus_bool_t	_dbus_get_is_errno_eagain_or_ewouldblock (int e)
	See if errno is EAGAIN or EWOULDBLOCK (this has to be done differently for Winsock so is abstracted) More...

dbus_bool_t	_dbus_get_is_errno_enomem (int e)
	See if errno is ENOMEM. More...

dbus_bool_t	_dbus_get_is_errno_eintr (int e)
	See if errno is EINTR. More...

dbus_bool_t	_dbus_get_is_errno_epipe (int e)
	See if errno is EPIPE. More...

dbus_bool_t	_dbus_get_is_errno_etoomanyrefs (int e)
	See if errno is ETOOMANYREFS. More...

DBUS_PRIVATE_EXPORT const char *	_dbus_strerror_from_errno (void)
	Get error message from errno. More...

void	_dbus_disable_sigpipe (void)
	signal (SIGPIPE, SIG_IGN); More...

DBUS_PRIVATE_EXPORT void	_dbus_exit (int code) _DBUS_GNUC_NORETURN
	Exit the process, returning the given value. More...

DBUS_PRIVATE_EXPORT int	_dbus_printf_string_upper_bound (const char *format, va_list args)
	Measure the length of the given format string and arguments, not including the terminating nul. More...

dbus_bool_t	_dbus_stat (const DBusString filename, DBusStat statbuf, DBusError *error)
	stat() wrapper. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_socketpair (DBusSocket fd1, DBusSocket fd2, dbus_bool_t blocking, DBusError *error)
	Creates pair of connect sockets (as in socketpair()). More...

DBUS_PRIVATE_EXPORT void	_dbus_print_backtrace (void)
	On GNU libc systems, print a crude backtrace to stderr. More...

dbus_bool_t	_dbus_become_daemon (const DBusString pidfile, DBusPipe print_pid_pipe, DBusError *error, dbus_bool_t keep_umask)
	Does the chdir, fork, setsid, etc. More...

dbus_bool_t	_dbus_verify_daemon_user (const char *user)
	Verify that after the fork we can successfully change to this user. More...

dbus_bool_t	_dbus_change_to_daemon_user (const char user, DBusError error)
	Changes the user and group the bus is running as. More...

dbus_bool_t	_dbus_write_pid_to_file_and_pipe (const DBusString pidfile, DBusPipe print_pid_pipe, dbus_pid_t pid_to_write, DBusError *error)
	Writes the given pid_to_write to a pidfile (if non-NULL) and/or to a pipe (if non-NULL). More...

dbus_bool_t	_dbus_command_for_pid (unsigned long pid, DBusString str, int max_len, DBusError error)
	Get a printable string describing the command used to execute the process with pid. More...

dbus_bool_t	_dbus_user_at_console (const char username, DBusError error)
	Checks if user is at the console. More...

DBUS_PRIVATE_EXPORT void	_dbus_init_system_log (const char *tag, DBusLogFlags flags)
	Initialize the system log. More...

DBUS_PRIVATE_EXPORT void	_dbus_log (DBusSystemLogSeverity severity, const char *msg,...)
	Log a message to the system log file (e.g. More...

DBUS_PRIVATE_EXPORT void	_dbus_logv (DBusSystemLogSeverity severity, const char *msg, va_list args)
	Log a message to the system log file (e.g. More...

dbus_bool_t	_dbus_get_autolaunch_address (const char scope, DBusString address, DBusError *error)
	Returns the address of a new session bus. More...

dbus_bool_t	_dbus_lookup_session_address (dbus_bool_t supported, DBusString address, DBusError *error)
	Determines the address of the session bus by querying a platform-specific method. More...

DBUS_PRIVATE_EXPORT dbus_bool_t	_dbus_read_local_machine_uuid (DBusGUID machine_id, dbus_bool_t create_if_not_found, DBusError error)
	Reads the uuid of the machine we're running on from the dbus configuration. More...

dbus_bool_t	_dbus_threads_init_platform_specific (void)
	Initialize threads as in dbus_threads_init_default(), appropriately for the platform. More...

void	_dbus_threads_lock_platform_specific (void)
	Lock a static mutex used to protect _dbus_threads_init_platform_specific(). More...

void	_dbus_threads_unlock_platform_specific (void)
	Undo _dbus_threads_lock_platform_specific(). More...

unsigned long	_dbus_pid_for_log (void)
	The only reason this is separate from _dbus_getpid() is to allow it on Windows for logging but not for other purposes. More...

DBUS_PRIVATE_EXPORT dbus_pid_t	_dbus_getpid (void)
	Gets our process ID. More...

DBUS_PRIVATE_EXPORT dbus_uid_t	_dbus_getuid (void)
	Gets our UID. More...

DBUS_PRIVATE_EXPORT void	_dbus_flush_caches (void)
	Called when the bus daemon is signaled to reload its configuration; any caches should be nuked. More...

dbus_bool_t	_dbus_replace_install_prefix (DBusString *path)
	Replace the DBUS_PREFIX in the given path, in-place, by the current D-Bus installation directory. More...

DBusRLimit *	_dbus_rlimit_save_fd_limit (DBusError *error)

dbus_bool_t	_dbus_rlimit_raise_fd_limit (DBusError *error)

dbus_bool_t	_dbus_rlimit_restore_fd_limit (DBusRLimit saved, DBusError error)

void	_dbus_rlimit_free (DBusRLimit *lim)

void	_dbus_daemon_report_ready (void)
	Report to a service manager that the daemon calling this function is ready for use. More...

void	_dbus_daemon_report_reloading (void)
	Report to a service manager that the daemon calling this function is reloading configuration. More...

void	_dbus_daemon_report_reloaded (void)
	Report to a service manager that the daemon calling this function is reloading configuration. More...

void	_dbus_daemon_report_stopping (void)
	Report to a service manager that the daemon calling this function is shutting down. More...

dbus_bool_t	_dbus_inet_sockaddr_to_string (const void sockaddr_pointer, size_t len, char string, size_t string_len, const char *family_name, dbus_uint16_t port, DBusError *error)

void	_dbus_set_error_with_inet_sockaddr (DBusError error, const void sockaddr_pointer, size_t len, const char *description, int saved_errno)

void	_dbus_combine_tcp_errors (DBusList *sources, const char summary, const char host, const char port, DBusError *dest)

Detailed Description

Internal system-dependent API available on UNIX and Windows.

The system-dependent API has a dual purpose. First, it encapsulates all usage of operating system APIs for ease of auditing and to avoid cluttering the rest of the code with bizarre OS quirks and headers. Second, it abstracts different operating system APIs for portability.

Macro Definition Documentation

◆ _DBUS_BYTE_OF_PRIMITIVE

#define _DBUS_BYTE_OF_PRIMITIVE	(	p,
		i
	)	(((const char*)&(p))[(i)])

Casts a primitive C type to a byte array and then indexes a particular byte of the array.

Definition at line 625 of file dbus-sysdeps.h.

◆ _DBUS_DOUBLES_BITWISE_EQUAL

#define _DBUS_DOUBLES_BITWISE_EQUAL	(	a,
		b
	)

Value:

     (_DBUS_BYTE_OF_PRIMITIVE (a, 0) == _DBUS_BYTE_OF_PRIMITIVE (b, 0) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 1) == _DBUS_BYTE_OF_PRIMITIVE (b, 1) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 2) == _DBUS_BYTE_OF_PRIMITIVE (b, 2) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 3) == _DBUS_BYTE_OF_PRIMITIVE (b, 3) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 4) == _DBUS_BYTE_OF_PRIMITIVE (b, 4) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 5) == _DBUS_BYTE_OF_PRIMITIVE (b, 5) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 6) == _DBUS_BYTE_OF_PRIMITIVE (b, 6) &&       \
      _DBUS_BYTE_OF_PRIMITIVE (a, 7) == _DBUS_BYTE_OF_PRIMITIVE (b, 7))

On x86 there is an 80-bit FPU, and if you do "a == b" it may have a or b in an 80-bit register, thus failing to compare the two 64-bit doubles for bitwise equality.

So this macro compares the two doubles bitwise.

Definition at line 632 of file dbus-sysdeps.h.

◆ _DBUS_POLLERR

#define _DBUS_POLLERR 0x0008

Error condition.

Definition at line 432 of file dbus-sysdeps.h.

◆ _DBUS_POLLHUP

#define _DBUS_POLLHUP 0x0010

Hung up.

Definition at line 434 of file dbus-sysdeps.h.

◆ _DBUS_POLLIN

#define _DBUS_POLLIN 0x0001

There is data to read.

Definition at line 426 of file dbus-sysdeps.h.

◆ _DBUS_POLLNVAL

#define _DBUS_POLLNVAL 0x0020

Invalid request: fd not open.

Definition at line 436 of file dbus-sysdeps.h.

◆ _DBUS_POLLOUT

#define _DBUS_POLLOUT 0x0004

Writing now will not block.

Definition at line 430 of file dbus-sysdeps.h.

◆ _DBUS_POLLPRI

#define _DBUS_POLLPRI 0x0002

There is urgent data to read.

Definition at line 428 of file dbus-sysdeps.h.

◆ DBUS_DEFAULT_MESSAGE_UNIX_FDS

#define DBUS_DEFAULT_MESSAGE_UNIX_FDS 16

Definition at line 705 of file dbus-sysdeps.h.

◆ DBUS_GID_FORMAT

#define DBUS_GID_FORMAT "%lu"

an appropriate printf format for dbus_gid_t

Definition at line 153 of file dbus-sysdeps.h.

◆ DBUS_GID_UNSET

#define DBUS_GID_UNSET ((dbus_gid_t) -1)

an invalid GID used to represent an uninitialized dbus_gid_t field

Definition at line 146 of file dbus-sysdeps.h.

◆ DBUS_PID_FORMAT

#define DBUS_PID_FORMAT "%lu"

an appropriate printf format for dbus_pid_t

Definition at line 149 of file dbus-sysdeps.h.

◆ DBUS_PID_UNSET

#define DBUS_PID_UNSET ((dbus_pid_t) -1)

an invalid PID used to represent an uninitialized dbus_pid_t field

Definition at line 142 of file dbus-sysdeps.h.

◆ DBUS_POLLABLE_FORMAT

#define DBUS_POLLABLE_FORMAT "d"

Definition at line 375 of file dbus-sysdeps.h.

◆ DBUS_SOCKET_FORMAT

#define DBUS_SOCKET_FORMAT "d"

Definition at line 182 of file dbus-sysdeps.h.

◆ DBUS_SOCKET_INIT

#define DBUS_SOCKET_INIT { -1 }

Definition at line 183 of file dbus-sysdeps.h.

◆ DBUS_UID_FORMAT

#define DBUS_UID_FORMAT "%lu"

an appropriate printf format for dbus_uid_t

Definition at line 151 of file dbus-sysdeps.h.

◆ DBUS_UID_UNSET

#define DBUS_UID_UNSET ((dbus_uid_t) -1)

an invalid UID used to represent an uninitialized dbus_uid_t field

Definition at line 144 of file dbus-sysdeps.h.

Typedef Documentation

◆ dbus_gid_t

typedef unsigned long dbus_gid_t

A group ID.

Definition at line 139 of file dbus-sysdeps.h.

◆ dbus_pid_t

typedef unsigned long dbus_pid_t

A process ID.

Definition at line 135 of file dbus-sysdeps.h.

◆ dbus_uid_t

typedef unsigned long dbus_uid_t

A user ID.

Definition at line 137 of file dbus-sysdeps.h.

◆ DBusAtomic

typedef struct DBusAtomic DBusAtomic

Opaque type representing an atomically-modifiable integer that can be used from multiple threads.

Definition at line 318 of file dbus-sysdeps.h.

◆ DBusDirIter

typedef struct DBusDirIter DBusDirIter

Opaque type for reading a directory listing.

Definition at line 485 of file dbus-sysdeps.h.

◆ DBusGUID

typedef union DBusGUID DBusGUID

Type representing a universally unique ID.

Definition at line 653 of file dbus-sysdeps.h.

◆ DBusPollable

typedef int DBusPollable

Definition at line 374 of file dbus-sysdeps.h.

◆ DBusRLimit

typedef struct DBusRLimit DBusRLimit

Definition at line 707 of file dbus-sysdeps.h.

Enumeration Type Documentation

◆ DBusCredentialsAddFlags

enum DBusCredentialsAddFlags

Definition at line 280 of file dbus-sysdeps.h.

◆ DBusLogFlags

enum DBusLogFlags

Definition at line 596 of file dbus-sysdeps.h.

◆ DBusSystemLogSeverity

enum DBusSystemLogSeverity

Definition at line 605 of file dbus-sysdeps.h.

Function Documentation

◆ _dbus_abort()

DBUS_PRIVATE_EXPORT void _dbus_abort ( void )

Aborts the program with SIGABRT (dumping core).

Definition at line 87 of file dbus-sysdeps.c.

References _dbus_exit(), _dbus_getenv(), _dbus_pid_for_log(), _dbus_print_backtrace(), and _dbus_sleep_milliseconds().

Referenced by _dbus_get_tmpdir(), _dbus_real_assert(), _dbus_real_assert_not_reached(), dbus_malloc(), dbus_malloc0(), and dbus_realloc().

◆ _dbus_accept()

DBusSocket _dbus_accept ( DBusSocket listen_fd )

Accepts a connection on a listening socket.

Handles EINTR for you.

This will enable FD_CLOEXEC for the returned socket.

Parameters

listen_fd the listen file descriptor

Returns: the connection fd of the client, or -1 on error

Handles EINTR for you.

Parameters

listen_fd the listen file descriptor

Returns: the connection fd of the client, or -1 on error

Definition at line 2536 of file dbus-sysdeps-unix.c.

References _dbus_fd_set_close_on_exec(), and NULL.

◆ _dbus_append_keyring_directory_for_credentials()

dbus_bool_t _dbus_append_keyring_directory_for_credentials	(	DBusString *	directory,
		DBusCredentials *	credentials
	)

Appends the directory in which a keyring for the given credentials should be stored.

The credentials should have either a Windows or UNIX user in them. The directory should be an absolute path.

On UNIX the directory is ~/.dbus-keyrings while on Windows it should probably be something else, since the dotfile convention is not normal on Windows.

Parameters

directory	string to append directory to
credentials	credentials the directory should be for

Returns: FALSE on no memory

Definition at line 4564 of file dbus-sysdeps-unix.c.

References _dbus_assert, _dbus_concat_dir_and_file(), _dbus_credentials_are_anonymous(), _dbus_credentials_get_unix_uid(), _dbus_getenv(), _dbus_homedir_from_uid(), _dbus_string_append(), _dbus_string_copy(), _dbus_string_free(), _dbus_string_init(), _dbus_string_init_const(), _dbus_string_set_length(), _dbus_warn(), DBUS_UID_UNSET, FALSE, NULL, and TRUE.

Referenced by _dbus_keyring_new_for_credentials().

◆ _dbus_append_user_from_current_process()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_append_user_from_current_process ( DBusString * str )

Append to the string the identity we would like to have when we authenticate, on UNIX this is the current process UID and on Windows something else, probably a Windows SID string.

No escaping is required, that is done in dbus-auth.c. The username here need not be anything human-readable, it can be the machine-readable form i.e. a user id.

Parameters

str	the string to append to

Returns: FALSE on no memory

No escaping is required, that is done in dbus-auth.c. The username here need not be anything human-readable, it can be the machine-readable form i.e. a user id.

Parameters

str	the string to append to

Returns: FALSE on no memory

Definition at line 2967 of file dbus-sysdeps-unix.c.

References _dbus_geteuid(), _dbus_getpid(), _dbus_string_append(), _dbus_string_append_uint(), FALSE, and NULL.

◆ _dbus_atomic_dec()

DBUS_PRIVATE_EXPORT dbus_int32_t _dbus_atomic_dec ( DBusAtomic * atomic )

Atomically decrement an integer.

Parameters

atomic pointer to the integer to decrement

Returns: the value before decrementing

Definition at line 3052 of file dbus-sysdeps-unix.c.

References DBusAtomic::value.

Referenced by _dbus_babysitter_unref(), _dbus_connection_unref_unlocked(), _dbus_pending_call_unref_and_unlock(), _dbus_server_unref_unlocked(), dbus_connection_unref(), dbus_free(), dbus_message_unref(), dbus_pending_call_unref(), dbus_server_ref(), and dbus_server_unref().

◆ _dbus_atomic_get()

DBUS_PRIVATE_EXPORT dbus_int32_t _dbus_atomic_get ( DBusAtomic * atomic )

Atomically get the value of an integer.

It may change at any time thereafter, so this is mostly only useful for assertions.

Parameters

atomic pointer to the integer to get

Returns: the value at this moment

Definition at line 3076 of file dbus-sysdeps-unix.c.

References DBusAtomic::value.

Referenced by _dbus_connection_close_if_only_one_ref().

◆ _dbus_atomic_inc()

DBUS_PRIVATE_EXPORT dbus_int32_t _dbus_atomic_inc ( DBusAtomic * atomic )

Atomically increments an integer.

Parameters

atomic pointer to the integer to increment

Returns: the value before incrementing

Definition at line 3029 of file dbus-sysdeps-unix.c.

References DBusAtomic::value.

Referenced by _dbus_babysitter_ref(), _dbus_connection_ref_unlocked(), _dbus_pending_call_ref_unlocked(), _dbus_server_init_base(), _dbus_server_ref_unlocked(), dbus_connection_add_filter(), dbus_connection_ref(), dbus_malloc(), dbus_malloc0(), dbus_message_copy(), dbus_message_ref(), dbus_pending_call_ref(), dbus_realloc(), dbus_server_ref(), and dbus_server_unref().

◆ _dbus_atomic_set_nonzero()

DBUS_PRIVATE_EXPORT void _dbus_atomic_set_nonzero ( DBusAtomic * atomic )

Atomically set the value of an integer to something nonzero.

Parameters

atomic pointer to the integer to set

Definition at line 3116 of file dbus-sysdeps-unix.c.

References DBusAtomic::value.

Referenced by dbus_connection_set_change_sigpipe().

◆ _dbus_atomic_set_zero()

DBUS_PRIVATE_EXPORT void _dbus_atomic_set_zero ( DBusAtomic * atomic )

Atomically set the value of an integer to 0.

Parameters

atomic pointer to the integer to set

Definition at line 3098 of file dbus-sysdeps-unix.c.

References DBusAtomic::value.

◆ _dbus_become_daemon()

dbus_bool_t _dbus_become_daemon	(	const DBusString *	pidfile,
		DBusPipe *	print_pid_pipe,
		DBusError *	error,
		dbus_bool_t	keep_umask
	)

Does the chdir, fork, setsid, etc.

to become a daemon process.

Parameters

pidfile	NULL, or pidfile to create
print_pid_pipe	pipe to print daemon's pid to, or -1 for none
error	return location for errors
keep_umask	TRUE to keep the original umask

Returns: FALSE on failure

to become a daemon process.

Parameters

pidfile	NULL, or pidfile to create
print_pid_pipe	file descriptor to print daemon's pid to, or -1 for none
error	return location for errors
keep_umask	TRUE to keep the original umask

Returns: FALSE on failure

Definition at line 84 of file dbus-sysdeps-util-unix.c.

References _dbus_error_from_errno(), DBUS_ERROR_FAILED, DBUS_ERROR_NOT_SUPPORTED, dbus_set_error(), and FALSE.

◆ _dbus_change_to_daemon_user()

dbus_bool_t _dbus_change_to_daemon_user	(	const char *	user,
		DBusError *	error
	)

Changes the user and group the bus is running as.

Parameters

user	the user to become
error	return location for errors

Returns: FALSE on failure

Definition at line 332 of file dbus-sysdeps-util-unix.c.

References _dbus_error_from_errno(), _dbus_get_user_id_and_primary_group(), _dbus_string_init_const(), _dbus_warn(), DBUS_ERROR_FAILED, dbus_set_error(), FALSE, NULL, and TRUE.

◆ _dbus_check_dir_is_private_to_user()

dbus_bool_t _dbus_check_dir_is_private_to_user	(	DBusString *	dir,
		DBusError *	error
	)

Checks to make sure the given directory is private to the user.

Parameters

dir	the name of the directory
error	error return

Returns: FALSE on failure

Definition at line 2591 of file dbus-sysdeps-unix.c.

References _dbus_error_from_errno(), DBUS_ERROR_FAILED, dbus_set_error(), FALSE, and TRUE.

◆ _dbus_check_setuid()

dbus_bool_t _dbus_check_setuid ( void )

NOTE: If you modify this function, please also consider making the corresponding change in GLib.

See glib/gutils.c:g_check_setuid().

Returns TRUE if the current process was executed as setuid (or an equivalent __libc_enable_secure is available). See: http://osdir.com/ml/linux.lfs.hardened/2007-04/msg00032.html

Definition at line 4817 of file dbus-sysdeps-unix.c.

References FALSE, and TRUE.

Referenced by _dbus_get_autolaunch_address(), _dbus_getenv(), _dbus_keyring_new_for_credentials(), _dbus_lookup_launchd_socket(), and _dbus_threads_init_platform_specific().

◆ _dbus_clearenv()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_clearenv ( void )

Wrapper for clearenv().

Returns: TRUE on success.

Definition at line 211 of file dbus-sysdeps.c.

References FALSE, NULL, and TRUE.

◆ _dbus_close_socket()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_close_socket	(	DBusSocket	fd,
		DBusError *	error
	)

Closes a socket.

Should not be used on non-socket file descriptors or handles.

Parameters

fd	the socket
error	return location for an error

Returns: FALSE if error is set

Closes a socket.

Parameters

fd	the file descriptor
error	error object

Returns: FALSE if error set

Definition at line 286 of file dbus-sysdeps-unix.c.

References _dbus_close(), _dbus_error_from_errno(), _dbus_strerror_from_errno(), dbus_set_error(), FALSE, and TRUE.

Referenced by _dbus_server_listen_platform_specific(), _dbus_server_new_for_domain_socket(), and _dbus_server_new_for_tcp_socket().

◆ _dbus_combine_tcp_errors()

void _dbus_combine_tcp_errors	(	DBusList **	sources,
		const char *	summary,
		const char *	host,
		const char *	port,
		DBusError *	dest
	)

Definition at line 911 of file dbus-sysdeps.c.

◆ _dbus_command_for_pid()

dbus_bool_t _dbus_command_for_pid	(	unsigned long	pid,
		DBusString *	str,
		int	max_len,
		DBusError *	error
	)

Get a printable string describing the command used to execute the process with pid.

This string should only be used for informative purposes such as logging; it may not be trusted.

The command is guaranteed to be printable ASCII and no longer than max_len.

Parameters

pid	Process id
str	Append command to this string
max_len	Maximum length of returned command
error	return location for errors

Returns: FALSE on error

Definition at line 1155 of file dbus-sysdeps-util-unix.c.

References _dbus_close(), _dbus_error_from_errno(), _dbus_read(), _dbus_string_append_printf(), _dbus_string_copy(), _dbus_string_free(), _dbus_string_init(), DBUS_ERROR_NOT_SUPPORTED, dbus_set_error(), FALSE, NULL, and TRUE.

◆ _dbus_concat_dir_and_file()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_concat_dir_and_file	(	DBusString *	dir,
		const DBusString *	next_component
	)

Appends the given filename to the given directory.

Parameters

dir	the directory name
next_component	the filename

Returns: TRUE on success

Parameters

dir	the directory name
next_component	the filename

Returns: TRUE on success

Definition at line 3331 of file dbus-sysdeps-unix.c.

References _dbus_string_append_byte(), _dbus_string_copy(), _dbus_string_shorten(), FALSE, and TRUE.

Referenced by _dbus_append_keyring_directory_for_credentials(), _dbus_get_standard_session_servicedirs(), _dbus_server_listen_platform_specific(), _dbus_split_paths_and_append(), and _dbus_user_at_console().

◆ _dbus_connect_tcp_socket()

DBusSocket _dbus_connect_tcp_socket	(	const char *	host,
		const char *	port,
		const char *	family,
		DBusError *	error
	)

Creates a socket and connects to a socket at the given host and port.

The connection fd is returned, and is set up as nonblocking.

This will set FD_CLOEXEC for the socket returned

Parameters

host	the host name to connect to
port	the port to connect to
family	the address family to listen on, NULL for all
error	return location for error code

Returns: connection file descriptor or -1 on error

The connection fd is returned, and is set up as nonblocking.

Parameters

host	the host name to connect to
port	the port to connect to
family	the address family to listen on, NULL for all
error	return location for error code

Returns: connection file descriptor or -1 on error

Definition at line 1421 of file dbus-sysdeps-unix.c.

◆ _dbus_connect_tcp_socket_with_nonce()

DBusSocket _dbus_connect_tcp_socket_with_nonce	(	const char *	host,
		const char *	port,
		const char *	family,
		const char *	noncefile,
		DBusError *	error
	)

Definition at line 1430 of file dbus-sysdeps-unix.c.

◆ _dbus_create_directory()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_create_directory	(	const DBusString *	filename,
		DBusError *	error
	)

directory interface

Unlike _dbus_ensure_directory(), this only succeeds if the directory is genuinely newly-created.

Parameters

filename	directory filename
error	initialized error object

Returns: TRUE on success

Definition at line 3300 of file dbus-sysdeps-unix.c.

References _dbus_strerror_from_errno(), DBUS_ERROR_FAILED, dbus_set_error(), FALSE, NULL, and TRUE.

◆ _dbus_credentials_add_from_current_process()

dbus_bool_t _dbus_credentials_add_from_current_process ( DBusCredentials * credentials )

Adds the most important credentials of the current process (the uid and pid) to the passed-in credentials object.

The group vector is not included because it is rarely needed. The Linux security label is not included because it is rarely needed, it requires reading /proc, and the LSM API doesn't actually guarantee that the string seen in /proc is comparable to the strings found in SO_PEERSEC results.

Parameters

credentials credentials to add to

Returns: FALSE if no memory; does not properly roll back on failure, so only some credentials may have been added

Adds the most important credentials of the current process (the uid and pid) to the passed-in credentials object.

Parameters

credentials credentials to add to

Returns: FALSE if no memory; does not properly roll back on failure, so only some credentials may have been added

Definition at line 2937 of file dbus-sysdeps-unix.c.

References _dbus_credentials_add_pid(), _dbus_credentials_add_windows_sid(), _dbus_getpid(), FALSE, NULL, and TRUE.

Referenced by _dbus_credentials_new_from_current_process(), and _dbus_keyring_new_for_credentials().

◆ _dbus_credentials_add_from_user()

dbus_bool_t _dbus_credentials_add_from_user	(	DBusCredentials *	credentials,
		const DBusString *	username,
		DBusCredentialsAddFlags	flags,
		DBusError *	error
	)

Adds the credentials corresponding to the given username.

Parameters

credentials	credentials to fill in
username	the username

Returns: TRUE if the username existed and we got some credentials

Used among other purposes to parses a desired identity provided from a client in the auth protocol. On UNIX this means parsing a UID, on Windows probably parsing an SID string.

Parameters

credentials	credentials to fill in
username	the username

Returns: TRUE if the username existed and we got some credentials

Definition at line 2252 of file dbus-sysdeps-win.c.

References _dbus_credentials_add_windows_sid(), _dbus_is_a_number(), DBUS_UID_UNSET, FALSE, and TRUE.

◆ _dbus_daemon_report_ready()

void _dbus_daemon_report_ready ( void )

Report to a service manager that the daemon calling this function is ready for use.

This is currently only implemented for systemd.

Definition at line 1562 of file dbus-sysdeps-util-unix.c.

Referenced by _dbus_daemon_report_reloaded().

◆ _dbus_daemon_report_reloaded()

void _dbus_daemon_report_reloaded ( void )

Report to a service manager that the daemon calling this function is reloading configuration.

This is currently only implemented for systemd.

Definition at line 1586 of file dbus-sysdeps-util-unix.c.

References _dbus_daemon_report_ready().

◆ _dbus_daemon_report_reloading()

void _dbus_daemon_report_reloading ( void )

Report to a service manager that the daemon calling this function is reloading configuration.

This is currently only implemented for systemd.

Definition at line 1574 of file dbus-sysdeps-util-unix.c.

◆ _dbus_daemon_report_stopping()

void _dbus_daemon_report_stopping ( void )

Report to a service manager that the daemon calling this function is shutting down.

This is currently only implemented for systemd.

Definition at line 1599 of file dbus-sysdeps-util-unix.c.

◆ _dbus_daemon_unpublish_session_bus_address()

void _dbus_daemon_unpublish_session_bus_address ( void )

Clear the platform-specific centralized location where the session bus address is published.

This must only be called if DBusServer::published_address is TRUE, which is be the case if and only if platform-specific code has published the address centrally.

On Windows, this is implemented by closing a global shared memory segment.

On Unix, the session bus address is not published in a centralized location by libdbus, so this function does nothing. The closest equivalent on Unix is that the session bus address is published by the dbus-launch tool, and unpublished automatically when the dbus-launch tool exits.

Definition at line 4632 of file dbus-sysdeps-unix.c.

References NULL.

◆ _dbus_delete_directory()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_delete_directory	(	const DBusString *	filename,
		DBusError *	error
	)

Removes a directory; Directory must be empty.

Parameters

filename	directory filename
error	initialized error object

Returns: TRUE on success

Definition at line 4664 of file dbus-sysdeps-unix.c.

References DBUS_ERROR_FAILED, dbus_set_error(), FALSE, and TRUE.

◆ _dbus_directory_close()

void _dbus_directory_close ( DBusDirIter * iter )

Closes a directory iteration.

Definition at line 783 of file dbus-sysdeps-util-unix.c.

References DBusDirIter::d, and dbus_free().

◆ _dbus_directory_get_next_file()

dbus_bool_t _dbus_directory_get_next_file	(	DBusDirIter *	iter,
		DBusString *	filename,
		DBusError *	error
	)

Get next file in the directory.

Will not return "." or ".." on UNIX. If an error occurs, the contents of "filename" are undefined. The error is never set if the function succeeds.

This function is not re-entrant, and not necessarily thread-safe. Only use it for test code or single-threaded utilities.

Parameters

iter	the iterator
filename	string to be set to the next file in the dir
error	return location for error

Returns: TRUE if filename was filled in with a new filename

Will not return "." or ".." on UNIX. If an error occurs, the contents of "filename" are undefined. The error is never set if the function succeeds.

Parameters

iter	the iterator
filename	string to be set to the next file in the dir
error	return location for error

Returns: TRUE if filename was filled in with a new filename

Definition at line 735 of file dbus-sysdeps-util-unix.c.

References _dbus_error_from_errno(), _dbus_string_append(), _dbus_string_set_length(), DBusDirIter::d, DBUS_ERROR_NO_MEMORY, dbus_set_error(), FALSE, and TRUE.

◆ _dbus_directory_open()

DBusDirIter * _dbus_directory_open	(	const DBusString *	filename,
		DBusError *	error
	)

Open a directory to iterate over.

Parameters

filename	the directory name
error	exception return object or NULL

Returns: new iterator, or NULL on error

Definition at line 687 of file dbus-sysdeps-util-unix.c.

References _dbus_error_from_errno(), _dbus_string_append(), _dbus_string_ends_with_c_str(), _dbus_string_free(), _dbus_string_init_from_string(), DBusDirIter::d, DBUS_ERROR_NO_MEMORY, dbus_free(), dbus_new0, dbus_set_error(), FALSE, NULL, and TRUE.

◆ _dbus_disable_sigpipe()

void _dbus_disable_sigpipe ( void )

signal (SIGPIPE, SIG_IGN);

Definition at line 3504 of file dbus-sysdeps-unix.c.

◆ _dbus_ensure_directory()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_ensure_directory	(	const DBusString *	filename,
		DBusError *	error
	)

Creates a directory; succeeds if the directory is created or already existed.

Parameters

filename	directory filename
error	initialized error object

Returns: TRUE on success

Definition at line 3268 of file dbus-sysdeps-unix.c.

References _dbus_strerror_from_errno(), DBUS_ERROR_FAILED, dbus_set_error(), FALSE, NULL, and TRUE.

◆ _dbus_error_from_errno()

DBUS_PRIVATE_EXPORT const char * _dbus_error_from_errno ( int error_number )

Converts a UNIX errno, or Windows errno or WinSock error value into a DBusError name.

Parameters

error_number the errno.

Returns: an error name

Definition at line 599 of file dbus-sysdeps.c.

References DBUS_ERROR_ACCESS_DENIED, DBUS_ERROR_ADDRESS_IN_USE, DBUS_ERROR_FAILED, DBUS_ERROR_FILE_EXISTS, DBUS_ERROR_FILE_NOT_FOUND, DBUS_ERROR_LIMITS_EXCEEDED, DBUS_ERROR_NO_MEMORY, DBUS_ERROR_NO_NETWORK, DBUS_ERROR_NO_SERVER, DBUS_ERROR_NOT_SUPPORTED, and DBUS_ERROR_TIMEOUT.

Referenced by _dbus_become_daemon(), _dbus_change_to_daemon_user(), _dbus_check_dir_is_private_to_user(), _dbus_close(), _dbus_close_socket(), _dbus_command_for_pid(), _dbus_connect_exec(), _dbus_directory_get_next_file(), _dbus_directory_open(), _dbus_dup(), _dbus_error_from_system_errno(), _dbus_file_get_contents(), _dbus_generate_random_bytes(), _dbus_is_console_user(), _dbus_listen_systemd_sockets(), _dbus_listen_tcp_socket(), _dbus_send_credentials_socket(), _dbus_set_socket_nonblocking(), _dbus_socketpair(), _dbus_stat(), and _dbus_string_save_to_file().

◆ _dbus_error_from_system_errno()

DBUS_PRIVATE_EXPORT const char * _dbus_error_from_system_errno ( void )

Converts the current system errno value into a DBusError name.

Returns: an error name

Definition at line 691 of file dbus-sysdeps.c.

References _dbus_error_from_errno().

◆ _dbus_exit()

DBUS_PRIVATE_EXPORT void _dbus_exit ( int code )

Exit the process, returning the given value.

Parameters

code	the exit code

Definition at line 3475 of file dbus-sysdeps-unix.c.

Referenced by _dbus_abort().

◆ _dbus_flush_caches()

DBUS_PRIVATE_EXPORT void _dbus_flush_caches ( void )

Called when the bus daemon is signaled to reload its configuration; any caches should be nuked.

Of course any caches that need explicit reload are probably broken, but c'est la vie.

Definition at line 4545 of file dbus-sysdeps-unix.c.

References _dbus_user_database_flush_system().

◆ _dbus_generate_random_ascii()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_generate_random_ascii	(	DBusString *	str,
		int	n_bytes,
		DBusError *	error
	)

Generates the given number of random bytes, where the bytes are chosen from the alphanumeric ASCII subset.

Parameters

str	the string
n_bytes	the number of random ASCII bytes to append to string
error	location to store reason for failure

Returns: TRUE on success, FALSE if no memory or other failure

Definition at line 559 of file dbus-sysdeps.c.

References _dbus_assert, _dbus_generate_random_bytes(), _dbus_string_validate_ascii(), FALSE, and TRUE.

Referenced by _dbus_server_listen_platform_specific(), and _dbus_string_save_to_file().

◆ _dbus_generate_random_bytes()

dbus_bool_t _dbus_generate_random_bytes	(	DBusString *	str,
		int	n_bytes,
		DBusError *	error
	)

Generates the given number of securely random bytes, using the best mechanism we can come up with.

Parameters

str	the string
n_bytes	the number of random bytes to append to string
error	location to store reason for failure

Returns: TRUE on success, FALSE on error

Generates the given number of securely random bytes, using the best mechanism we can come up with.

Parameters

str	the string
n_bytes	the number of random bytes to append to string
error	location to store reason for failure

Returns: TRUE on success

Definition at line 3406 of file dbus-sysdeps-unix.c.

References _dbus_close(), _dbus_error_from_errno(), _dbus_read(), _dbus_string_get_data_len(), _dbus_string_lengthen(), _dbus_string_set_length(), DBUS_ERROR_IO_ERROR, dbus_set_error(), FALSE, NULL, and TRUE.

Referenced by _dbus_generate_random_ascii(), and _dbus_generate_random_bytes_buffer().

◆ _dbus_generate_random_bytes_buffer()

_DBUS_WARN_UNUSED_RESULT dbus_bool_t _dbus_generate_random_bytes_buffer	(	char *	buffer,
		int	n_bytes,
		DBusError *	error
	)

Random numbers.

Parameters

buffer	an allocated buffer
n_bytes	the number of bytes in buffer to write to
error	location to store reason for failure

Returns: TRUE on success

Definition at line 525 of file dbus-sysdeps.c.

References _dbus_generate_random_bytes(), _dbus_string_copy_to_buffer(), _dbus_string_free(), _dbus_string_init(), FALSE, and TRUE.

Referenced by _dbus_generate_uuid().

◆ _dbus_get_autolaunch_address()

dbus_bool_t _dbus_get_autolaunch_address	(	const char *	scope,
		DBusString *	address,
		DBusError *	error
	)

Returns the address of a new session bus.

If successful, returns TRUE and appends the address to address. If a failure happens, returns FALSE and sets an error in error.

Parameters

scope	scope of autolaunch (Windows only)
address	a DBusString where the address can be stored
error	a DBusError to store the error in case of failure

Returns: TRUE on success, FALSE if an error happened

Definition at line 4133 of file dbus-sysdeps-unix.c.

References _dbus_assert, _dbus_check_setuid(), _dbus_get_local_machine_uuid_encoded(), _dbus_getenv(), _DBUS_N_ELEMENTS, _dbus_string_append_printf(), _dbus_string_free(), _dbus_string_init(), DBUS_ERROR_FAILED, DBUS_ERROR_NO_MEMORY, DBUS_ERROR_NOT_SUPPORTED, dbus_set_error(), dbus_set_error_const(), FALSE, NULL, and TRUE.

◆ _dbus_get_environment()

char ** _dbus_get_environment ( void )

Gets a NULL-terminated list of key=value pairs from the environment.

Use dbus_free_string_array to free it.

Returns: the environment or NULL on OOM

Definition at line 53 of file dbus-sysdeps-util.c.

References _dbus_assert, _dbus_strdup(), dbus_free_string_array(), dbus_new0, and NULL.

◆ _dbus_get_is_errno_eagain_or_ewouldblock()

dbus_bool_t _dbus_get_is_errno_eagain_or_ewouldblock ( int e )

See if errno is EAGAIN or EWOULDBLOCK (this has to be done differently for Winsock so is abstracted)

Returns: TRUE if e == EAGAIN or e == EWOULDBLOCK

Definition at line 4643 of file dbus-sysdeps-unix.c.

◆ _dbus_get_is_errno_eintr()

dbus_bool_t _dbus_get_is_errno_eintr ( int e )

See if errno is EINTR.

Returns: TRUE if e == EINTR

Definition at line 724 of file dbus-sysdeps.c.

◆ _dbus_get_is_errno_enomem()

dbus_bool_t _dbus_get_is_errno_enomem ( int e )

See if errno is ENOMEM.

Returns: TRUE if e == ENOMEM

Definition at line 714 of file dbus-sysdeps.c.

◆ _dbus_get_is_errno_epipe()

dbus_bool_t _dbus_get_is_errno_epipe ( int e )

See if errno is EPIPE.

Returns: TRUE if errno == EPIPE

Definition at line 734 of file dbus-sysdeps.c.

◆ _dbus_get_is_errno_etoomanyrefs()

dbus_bool_t _dbus_get_is_errno_etoomanyrefs ( int e )

See if errno is ETOOMANYREFS.

Returns: TRUE if errno == ETOOMANYREFS

Definition at line 744 of file dbus-sysdeps.c.

References FALSE.

◆ _dbus_get_low_level_socket_errno()

int _dbus_get_low_level_socket_errno ( void )

Definition at line 5077 of file dbus-sysdeps-unix.c.

◆ _dbus_get_monotonic_time()

DBUS_PRIVATE_EXPORT void _dbus_get_monotonic_time	(	long *	tv_sec,
		long *	tv_usec
	)

Get current time, as in gettimeofday().

Use the monotonic clock if available, to avoid problems when the system time changes.

Parameters

tv_sec	return location for number of seconds
tv_usec	return location for number of microseconds

Definition at line 3215 of file dbus-sysdeps-unix.c.

References _dbus_get_real_time(), and NULL.

◆ _dbus_get_real_time()

DBUS_PRIVATE_EXPORT void _dbus_get_real_time	(	long *	tv_sec,
		long *	tv_usec
	)

Get current time, as in gettimeofday().

Never uses the monotonic clock.

Parameters

tv_sec	return location for number of seconds
tv_usec	return location for number of microseconds

Definition at line 3246 of file dbus-sysdeps-unix.c.

References NULL.

Referenced by _dbus_generate_uuid(), and _dbus_get_monotonic_time().

◆ _dbus_get_session_config_file()

dbus_bool_t _dbus_get_session_config_file ( DBusString * str )

Get the absolute path of the session.conf file.

Parameters

str	the string to append to, which must be empty on entry

Returns: FALSE if no memory

Definition at line 1550 of file dbus-sysdeps-util-unix.c.

References _dbus_assert, and _dbus_string_append().

◆ _dbus_get_standard_session_servicedirs()

dbus_bool_t _dbus_get_standard_session_servicedirs ( DBusList ** dirs )

Returns the standard directories for a session bus to look for service activation files.

On UNIX this should be the standard xdg freedesktop.org data directories:

XDG_DATA_HOME=${XDG_DATA_HOME-$HOME/.local/share} XDG_DATA_DIRS=${XDG_DATA_DIRS-/usr/local/share:/usr/share}

and

DBUS_DATADIR

Parameters

dirs	the directory list we are returning

Returns: FALSE on OOM

On Windows this should be data directories:

CommonProgramFiles%/dbus

and

relocated DBUS_DATADIR

Parameters

dirs	the directory list we are returning

Returns: FALSE on OOM

Definition at line 1410 of file dbus-sysdeps-util-unix.c.

References _dbus_concat_dir_and_file(), _dbus_getenv(), _dbus_homedir_from_current_process(), _dbus_replace_install_prefix(), _dbus_split_paths_and_append(), _dbus_string_append(), _dbus_string_free(), _dbus_string_init(), _dbus_string_init_const(), FALSE, NULL, and TRUE.

◆ _dbus_get_standard_system_servicedirs()

dbus_bool_t _dbus_get_standard_system_servicedirs ( DBusList ** dirs )

Returns the standard directories for a system bus to look for service activation files.

On UNIX this should be the standard xdg freedesktop.org data directories:

XDG_DATA_DIRS=${XDG_DATA_DIRS-/usr/local/share:/usr/share}

and

DBUS_DATADIR

On Windows there is no system bus and this function can return nothing.

Parameters

dirs	the directory list we are returning

Returns: FALSE on OOM

Definition at line 1502 of file dbus-sysdeps-util-unix.c.

References _dbus_split_paths_and_append(), _dbus_string_init_const(), NULL, and TRUE.

◆ _dbus_get_system_config_file()

dbus_bool_t _dbus_get_system_config_file ( DBusString * str )

Get the absolute path of the system.conf file (there is no system bus on Windows so this can just return FALSE and print a warning or something)

Parameters

str	the string to append to, which must be empty on entry

Returns: FALSE if no memory

Definition at line 1536 of file dbus-sysdeps-util-unix.c.

References _dbus_assert, and _dbus_string_append().

◆ _dbus_get_tmpdir()

DBUS_PRIVATE_EXPORT const char * _dbus_get_tmpdir ( void )

Gets the temporary files directory by inspecting the environment variables TMPDIR, TMP, and TEMP in that order.

If none of those are set "/tmp" is returned

Returns: location of temp directory, or NULL if no memory for locking

Definition at line 3863 of file dbus-sysdeps-unix.c.

References _dbus_abort(), _dbus_assert, _DBUS_LOCK, _DBUS_UNLOCK, _dbus_warn(), and NULL.

◆ _dbus_getenv()

DBUS_PRIVATE_EXPORT const char * _dbus_getenv ( const char * varname )

Wrapper for getenv().

Parameters

varname name of environment variable

Returns: value of environment variable or NULL if unset

Definition at line 195 of file dbus-sysdeps.c.

References _dbus_check_setuid(), and NULL.

Referenced by _dbus_abort(), _dbus_append_keyring_directory_for_credentials(), _dbus_get_autolaunch_address(), _dbus_get_standard_session_servicedirs(), _dbus_homedir_from_uid(), _dbus_server_listen_platform_specific(), _dbus_server_new_for_launchd(), and _dbus_set_up_transient_session_servicedirs().

◆ _dbus_getpid()

DBUS_PRIVATE_EXPORT dbus_pid_t _dbus_getpid ( void )

Gets our process ID.

Returns: process ID

Definition at line 2978 of file dbus-sysdeps-unix.c.

Referenced by _dbus_append_user_from_current_process(), _dbus_credentials_add_from_current_process(), and _dbus_pid_for_log().

◆ _dbus_getuid()

DBUS_PRIVATE_EXPORT dbus_uid_t _dbus_getuid ( void )

Gets our UID.

Returns: process UID

Gets our UID.

Returns: on Windows, just DBUS_UID_UNSET

Definition at line 2987 of file dbus-sysdeps-unix.c.

References DBUS_UID_UNSET.

Referenced by _dbus_homedir_from_uid().

◆ _dbus_inet_sockaddr_to_string()

dbus_bool_t _dbus_inet_sockaddr_to_string	(	const void *	sockaddr_pointer,
		size_t	len,
		char *	string,
		size_t	string_len,
		const char **	family_name,
		dbus_uint16_t *	port,
		DBusError *	error
	)

Definition at line 796 of file dbus-sysdeps.c.

◆ _dbus_init_system_log()

DBUS_PRIVATE_EXPORT void _dbus_init_system_log	(	const char *	tag,
		DBusLogFlags	flags
	)

Initialize the system log.

The "tag" is not copied, and must remain valid for the entire lifetime of the process or until _dbus_init_system_log() is called again. In practice it will normally be a constant.

On platforms that do not support a system log, the #DBUS_LOG_FLAGS_SYSTEM_LOG flag is treated as equivalent to #DBUS_LOG_FLAGS_STDERR.

Parameters

tag	the name of the executable (syslog tag)
mode	whether to log to stderr, the system log or both

The "tag" is not copied, and must remain valid for the entire lifetime of the process or until _dbus_init_system_log() is called again. In practice it will normally be a constant.

Parameters

tag	the name of the executable (syslog tag)
mode	whether to log to stderr, the system log or both

Definition at line 4998 of file dbus-sysdeps-unix.c.

References _dbus_assert.

◆ _dbus_listen_tcp_socket()

int _dbus_listen_tcp_socket	(	const char *	host,
		const char *	port,
		const char *	family,
		DBusString *	retport,
		const char **	retfamily,
		DBusSocket **	fds_p,
		DBusError *	error
	)

Creates a socket and binds it to the given path, then listens on the socket.

The socket is set to be nonblocking. In case of port=0 a random free port is used and returned in the port parameter. If inaddr_any is specified, the hostname is ignored.

This will set FD_CLOEXEC for the socket returned

Parameters

host	the host name to listen on
port	the port to listen on, if zero a free port will be used
family	the address family to listen on, NULL for all
retport	string to return the actual port listened on
retfamily	string to return the actual family listened on
fds_p	location to store returned file descriptors
error	return location for errors

Returns: the number of listening file descriptors or -1 on error

The socket is set to be nonblocking. In case of port=0 a random free port is used and returned in the port parameter. If inaddr_any is specified, the hostname is ignored.

Parameters

host	the host name to listen on
port	the port to listen on, if zero a free port will be used
family	the address family to listen on, NULL for all
retport	string to return the actual port listened on
retfamily	string to return the actual family listened on
fds_p	location to store returned file descriptors
error	return location for errors

Returns: the number of listening file descriptors or -1 on error

Definition at line 1582 of file dbus-sysdeps-unix.c.

References _dbus_close(), _dbus_error_from_errno(), _dbus_warn(), _DBUS_ZERO, DBUS_ERROR_BAD_ADDRESS, dbus_error_init(), DBUS_ERROR_INVALID_ARGS, dbus_new0, dbus_set_error(), FALSE, and NULL.

Referenced by _dbus_server_new_for_tcp_socket().

◆ _dbus_log()

DBUS_PRIVATE_EXPORT void _dbus_log	(	DBusSystemLogSeverity	severity,
		const char *	msg,
			...
	)

Log a message to the system log file (e.g.

syslog on Unix) and/or stderr.

Parameters

severity	a severity value
msg	a printf-style format string

Definition at line 770 of file dbus-sysdeps.c.

References _dbus_logv().

◆ _dbus_logv()

DBUS_PRIVATE_EXPORT void _dbus_logv	(	DBusSystemLogSeverity	severity,
		const char *	msg,
		va_list	args
	)

Log a message to the system log file (e.g.

syslog on Unix) and/or stderr.

Parameters

severity	a severity value
msg	a printf-style format string
args	arguments for the format string

syslog on Unix).

Parameters

severity	a severity value
msg	a printf-style format string
args	arguments for the format string

Definition at line 5023 of file dbus-sysdeps-unix.c.

Referenced by _dbus_log().

◆ _dbus_lookup_session_address()

dbus_bool_t _dbus_lookup_session_address	(	dbus_bool_t *	supported,
		DBusString *	address,
		DBusError *	error
	)

Determines the address of the session bus by querying a platform-specific method.

The first parameter will be a boolean specifying whether or not a dynamic session lookup is supported on this platform.

If supported is TRUE and the return value is TRUE, the address will be appended to address. If a failure happens, returns FALSE and sets an error in error.

If supported is FALSE, ignore the return value.

Parameters

supported	returns whether this method is supported
address	a DBusString where the address can be stored
error	a DBusError to store the error in case of failure

Returns: TRUE on success, FALSE if an error happened

Definition at line 4513 of file dbus-sysdeps-unix.c.

References FALSE, and TRUE.

◆ _dbus_parse_unix_group_from_config()

dbus_bool_t _dbus_parse_unix_group_from_config	(	const DBusString *	groupname,
		dbus_gid_t *	gid_p
	)

Parse a UNIX group from the bus config file.

On Windows, this should simply always fail (just return FALSE).

Parameters

groupname	the groupname text
gid_p	place to return the gid

Returns: TRUE on success

Definition at line 981 of file dbus-sysdeps-util-unix.c.

References _dbus_get_group_id(), and FALSE.

◆ _dbus_parse_unix_user_from_config()

dbus_bool_t _dbus_parse_unix_user_from_config	(	const DBusString *	username,
		dbus_uid_t *	uid_p
	)

Parse a UNIX user from the bus config file.

On Windows, this should simply always fail (just return FALSE).

Parameters

username	the username text
uid_p	place to return the uid

Returns: TRUE on success

Definition at line 965 of file dbus-sysdeps-util-unix.c.

References _dbus_get_user_id(), and FALSE.

◆ _dbus_path_is_absolute()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_path_is_absolute ( const DBusString * filename )

Checks whether the filename is an absolute path.

Parameters

filename the filename

Returns: TRUE if an absolute path

Definition at line 622 of file dbus-sysdeps-util-unix.c.

References FALSE.

◆ _dbus_pid_for_log()

unsigned long _dbus_pid_for_log ( void )

The only reason this is separate from _dbus_getpid() is to allow it on Windows for logging but not for other purposes.

Returns: process ID to put in log messages

Definition at line 3008 of file dbus-sysdeps-unix.c.

References _dbus_getpid().

Referenced by _dbus_abort().

◆ _dbus_poll()

DBUS_PRIVATE_EXPORT int _dbus_poll	(	DBusPollFD *	fds,
		int	n_fds,
		int	timeout_milliseconds
	)

Wrapper for poll().

Parameters

fds	the file descriptors to poll
n_fds	number of descriptors in the array
timeout_milliseconds	timeout or -1 for infinite

Returns: numbers of fds with revents, or <0 on error

Definition at line 3137 of file dbus-sysdeps-unix.c.

References _DBUS_POLLERR, _DBUS_POLLIN, _DBUS_POLLOUT, DBusPollFD::events, DBusPollFD::fd, NULL, and DBusPollFD::revents.

◆ _dbus_print_backtrace()

DBUS_PRIVATE_EXPORT void _dbus_print_backtrace ( void )

On GNU libc systems, print a crude backtrace to stderr.

On other systems, print "no backtrace support" and block for possible gdb attachment if an appropriate environment variable is set.

Definition at line 3676 of file dbus-sysdeps-unix.c.

Referenced by _dbus_abort().

◆ _dbus_printf_string_upper_bound()

DBUS_PRIVATE_EXPORT int _dbus_printf_string_upper_bound	(	const char *	format,
		va_list	args
	)

Measure the length of the given format string and arguments, not including the terminating nul.

Parameters

format	a printf-style format string
args	arguments for the format string

Returns: length of the given format string and args, or -1 if no memory

Measure the length of the given format string and arguments, not including the terminating nul.

Definition at line 3793 of file dbus-sysdeps-unix.c.

References dbus_free(), dbus_malloc(), and NULL.

Referenced by _dbus_string_append_printf_valist().

◆ _dbus_read_credentials_socket()

dbus_bool_t _dbus_read_credentials_socket	(	DBusSocket	handle,
		DBusCredentials *	credentials,
		DBusError *	error
	)

Reads a single byte which must be nul (an error occurs otherwise), and reads unix credentials if available.

Clears the credentials object, then adds pid/uid if available, so any previous credentials stored in the object are lost.

DBusServer makes the security assumption that the credentials returned by this method are the credentials that were active at the time the socket was opened. Do not add APIs to this method that would break that assumption.

In particular, it is incorrect to use any API of the form "get the process ID at the other end of the connection, then determine its uid, gid, or other credentials from the pid" (e.g. looking in /proc on Linux). If we did that, we would be vulnerable to several attacks. A malicious process could queue up the rest of the authentication handshake and a malicious message that it should not be allowed to send, then race with the DBusServer to exec() a more privileged (e.g. setuid) binary that would have been allowed to send that message; or it could exit, and arrange for enough setuid processes to be started that its pid would be recycled for one of those processes with high probability; or it could fd-pass the connection to a more privileged process.

Return value indicates whether a byte was read, not whether we got valid credentials. On some systems, such as Linux, reading/writing the byte isn't actually required, but we do it anyway just to avoid multiple codepaths.

Fails if no byte is available, so you must select() first.

The point of the byte is that on some systems we have to use sendmsg()/recvmsg() to transmit credentials.

Parameters

client_fd	the client file descriptor
credentials	object to add client credentials to
error	location to store error code

Returns: TRUE on success

Fills in pid/uid/gid with -1 if no credentials are available. Return value indicates whether a byte was read, not whether we got valid credentials. On some systems, such as Linux, reading/writing the byte isn't actually required, but we do it anyway just to avoid multiple codepaths.

Fails if no byte is available, so you must select() first.

The point of the byte is that on some systems we have to use sendmsg()/recvmsg() to transmit credentials.

Parameters

handle	the client file descriptor
credentials	struct to fill with credentials of client
error	location to store error code

Returns: TRUE on success

Definition at line 2185 of file dbus-sysdeps-unix.c.

References _dbus_credentials_add_pid(), _dbus_credentials_add_windows_sid(), _dbus_read_socket(), _dbus_string_free(), _dbus_string_init(), FALSE, NULL, and TRUE.

◆ _dbus_read_local_machine_uuid()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_read_local_machine_uuid	(	DBusGUID *	machine_id,
		dbus_bool_t	create_if_not_found,
		DBusError *	error
	)

Reads the uuid of the machine we're running on from the dbus configuration.

Optionally try to create it (only root can do this usually).

On UNIX, reads a file that gets created by dbus-uuidgen in a post-install script. On Windows, if there's a standard machine uuid we could just use that, but I can't find one with the right properties (the hardware profile guid can change without rebooting I believe). If there's no standard one we might want to use the registry instead of a file for this, and I'm not sure how we'd ensure the uuid gets created.

Parameters

machine_id	guid to init with the machine's uuid
create_if_not_found	try to create the uuid if it doesn't exist
error	the error return

Returns: FALSE if the error is set

Definition at line 4252 of file dbus-sysdeps-unix.c.

References _dbus_generate_uuid(), _dbus_read_uuid_file(), _dbus_string_init_const(), _dbus_write_uuid_file(), DBusGUID::as_uint32s, dbus_error_free(), DBUS_ERROR_INIT, DBUS_ERROR_NO_MEMORY, dbus_set_error(), FALSE, DBusError::message, DBusError::name, NULL, and TRUE.

Referenced by _dbus_get_uuid().

◆ _dbus_read_socket()

DBUS_PRIVATE_EXPORT int _dbus_read_socket	(	DBusSocket	fd,
		DBusString *	buffer,
		int	count
	)

Like _dbus_read(), but only works on sockets so is available on Windows.

Parameters

fd	the socket
buffer	string to append data to
count	max amount of data to read

Returns: number of bytes appended to the string

Like _dbus_read(), but only works on sockets so is available on Windows.

Thin wrapper around the read() system call that appends the data it reads to the DBusString buffer. It appends up to the given count, and returns the same value and same errno as read(). The only exception is that _dbus_read_socket() handles EINTR for you. _dbus_read_socket() can return ENOMEM, even though regular UNIX read doesn't.

Parameters

fd	the file descriptor to read from
buffer	the buffer to append data to
count	the amount of data to read

Returns: the number of bytes read or -1

Definition at line 302 of file dbus-sysdeps-unix.c.

References _dbus_assert, _dbus_read(), _dbus_string_get_data_len(), _dbus_string_lengthen(), _dbus_string_set_length(), and _dbus_verbose_bytes_of_string().

Referenced by _dbus_read_credentials_socket(), and _dbus_read_socket_with_unix_fds().

◆ _dbus_read_socket_with_unix_fds()

int _dbus_read_socket_with_unix_fds	(	DBusSocket	fd,
		DBusString *	buffer,
		int	count,
		int *	fds,
		unsigned int *	n_fds
	)

Like _dbus_read_socket() but also tries to read unix fds from the socket.

When there are more fds to read than space in the array passed this function will fail with ENOSPC.

Parameters

fd	the socket
buffer	string to append data to
count	max amount of data to read
fds	array to place read file descriptors in
n_fds	on input space in fds array, on output how many fds actually got read

Returns: number of bytes appended to string

Definition at line 358 of file dbus-sysdeps-unix.c.

References _dbus_assert, _dbus_read_socket(), _dbus_string_get_data_len(), _dbus_string_lengthen(), _dbus_string_set_length(), _DBUS_ZERO, DBUS_MAXIMUM_MESSAGE_UNIX_FDS, and FALSE.

◆ _dbus_replace_install_prefix()

dbus_bool_t _dbus_replace_install_prefix ( DBusString * path )

Replace the DBUS_PREFIX in the given path, in-place, by the current D-Bus installation directory.

On Unix this function does nothing, successfully.

Parameters

path	path to edit

Returns: FALSE on OOM

Definition at line 1231 of file dbus-sysdeps-util-unix.c.

References _dbus_string_free(), _dbus_string_init(), _dbus_string_replace_len(), _dbus_string_starts_with_c_str(), FALSE, and TRUE.

Referenced by _dbus_get_standard_session_servicedirs().

◆ _dbus_restore_socket_errno()

void _dbus_restore_socket_errno ( int saved_errno )

Definition at line 4973 of file dbus-sysdeps-unix.c.

◆ _dbus_rlimit_free()

void _dbus_rlimit_free ( DBusRLimit * lim )

Definition at line 533 of file dbus-sysdeps-util-unix.c.

◆ _dbus_rlimit_raise_fd_limit()

dbus_bool_t _dbus_rlimit_raise_fd_limit ( DBusError * error )

Definition at line 516 of file dbus-sysdeps-util-unix.c.

◆ _dbus_rlimit_restore_fd_limit()

dbus_bool_t _dbus_rlimit_restore_fd_limit	(	DBusRLimit *	saved,
		DBusError *	error
	)

Definition at line 523 of file dbus-sysdeps-util-unix.c.

◆ _dbus_rlimit_save_fd_limit()

DBusRLimit * _dbus_rlimit_save_fd_limit ( DBusError * error )

Definition at line 509 of file dbus-sysdeps-util-unix.c.

◆ _dbus_save_socket_errno()

int _dbus_save_socket_errno ( void )

Definition at line 4967 of file dbus-sysdeps-unix.c.

◆ _dbus_send_credentials_socket()

dbus_bool_t _dbus_send_credentials_socket	(	DBusSocket	server_fd,
		DBusError *	error
	)

Sends a single nul byte with our UNIX credentials as ancillary data.

Returns TRUE if the data was successfully written. On systems that don't support sending credentials, just writes a byte, doesn't send any credentials. On some systems, such as Linux, reading/writing the byte isn't actually required, but we do it anyway just to avoid multiple codepaths.

Fails if no byte can be written, so you must select() first.

The point of the byte is that on some systems we have to use sendmsg()/recvmsg() to transmit credentials.

Parameters

server_fd	file descriptor for connection to server
error	return location for error code

Returns: TRUE if the byte was sent

Definition at line 2515 of file dbus-sysdeps-unix.c.

References _dbus_assert, _dbus_error_from_errno(), _dbus_strerror_from_errno(), _dbus_string_init_const_len(), _dbus_write_socket(), DBUS_ERROR_IO_ERROR, dbus_set_error(), FALSE, and TRUE.

◆ _dbus_set_errno_to_zero()

void _dbus_set_errno_to_zero ( void )

Assign 0 to the global errno variable.

Definition at line 700 of file dbus-sysdeps.c.

Referenced by _dbus_string_parse_int(), and _dbus_string_parse_uint().

◆ _dbus_set_error_with_inet_sockaddr()

void _dbus_set_error_with_inet_sockaddr	(	DBusError *	error,
		const void *	sockaddr_pointer,
		size_t	len,
		const char *	description,
		int	saved_errno
	)

Definition at line 883 of file dbus-sysdeps.c.

◆ _dbus_set_socket_nonblocking()

dbus_bool_t _dbus_set_socket_nonblocking	(	DBusSocket	handle,
		DBusError *	error
	)

Sets a file descriptor to be nonblocking.

Parameters

fd	the file descriptor.
error	address of error location.

Returns: TRUE on success.

Parameters

handle	the file descriptor.
error	address of error location.

Returns: TRUE on success.

Definition at line 3631 of file dbus-sysdeps-unix.c.

References _dbus_error_from_errno(), _dbus_strerror_from_errno(), dbus_set_error(), FALSE, and TRUE.

◆ _dbus_set_up_transient_session_servicedirs()

dbus_bool_t _dbus_set_up_transient_session_servicedirs	(	DBusList **	dirs,
		DBusError *	error
	)

Returns the standard directories for a session bus to look for transient service activation files.

Parameters

dirs	the directory list we are returning

Returns: FALSE on error

On Windows, there are none.

Parameters

dirs	the directory list we are returning

Returns: TRUE

Definition at line 1313 of file dbus-sysdeps-util-unix.c.

References _dbus_getenv(), _dbus_list_append(), _dbus_string_append(), _dbus_string_append_printf(), _dbus_string_free(), _dbus_string_init(), _dbus_string_steal_data(), dbus_free(), FALSE, NULL, and TRUE.

◆ _dbus_sleep_milliseconds()

DBUS_PRIVATE_EXPORT void _dbus_sleep_milliseconds ( int milliseconds )

Sleeps the given number of milliseconds.

Parameters

milliseconds number of milliseconds

Definition at line 3376 of file dbus-sysdeps-unix.c.

Referenced by _dbus_abort().

◆ _dbus_socket_can_pass_unix_fd()

dbus_bool_t _dbus_socket_can_pass_unix_fd ( DBusSocket fd )

Checks whether file descriptors may be passed via the socket.

Parameters

fd	the socket

Returns: TRUE when fd passing over this socket is supported

Definition at line 4692 of file dbus-sysdeps-unix.c.

References _DBUS_ZERO, and FALSE.

◆ _dbus_socketpair()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_socketpair	(	DBusSocket *	fd1,
		DBusSocket *	fd2,
		dbus_bool_t	blocking,
		DBusError *	error
	)

Creates pair of connect sockets (as in socketpair()).

Sets both ends of the pair nonblocking.

Marks both file descriptors as close-on-exec

Parameters

fd1	return location for one end
fd2	return location for the other end
blocking	TRUE if pair should be blocking
error	error return

Returns: FALSE on failure (if error is set)

Definition at line 3718 of file dbus-sysdeps-unix.c.

References _dbus_close(), _dbus_error_from_errno(), _dbus_fd_set_close_on_exec(), _dbus_strerror_from_errno(), _dbus_warn(), _DBUS_ZERO, DBUS_ERROR_FAILED, dbus_set_error(), FALSE, NULL, and TRUE.

◆ _dbus_split_paths_and_append()

DBUS_PRIVATE_EXPORT dbus_bool_t _dbus_split_paths_and_append	(	DBusString *	dirs,
		const char *	suffix,
		DBusList **	dir_list
	)

Split paths into a list of char strings.

Parameters

dirs	string with pathes
suffix	string concated to each path in dirs
dir_list	contains a list of splitted pathes return TRUE is pathes could be splittes,FALSE in oom case

Definition at line 236 of file dbus-sysdeps.c.

References _dbus_concat_dir_and_file(), _dbus_list_append(), _dbus_list_clear_full(), _dbus_string_chop_white(), _dbus_string_copy_data(), _dbus_string_copy_len(), _dbus_string_find(), _dbus_string_free(), _dbus_string_init(), _dbus_string_init_const(), dbus_free(), FALSE, and TRUE.

Referenced by _dbus_get_standard_session_servicedirs(), and _dbus_get_standard_system_servicedirs().

◆ _dbus_stat()

dbus_bool_t _dbus_stat	(	const DBusString *	filename,
		DBusStat *	statbuf,
		DBusError *	error
	)

stat() wrapper.

Parameters

filename	the filename to stat
statbuf	the stat info to fill in
error	return location for error

Returns: FALSE if error was set

Definition at line 639 of file dbus-sysdeps-util-unix.c.

References _dbus_error_from_errno(), DBusStat::atime, DBusStat::ctime, DBUS_GID_UNSET, dbus_set_error(), DBUS_UID_UNSET, FALSE, DBusStat::gid, DBusStat::mode, DBusStat::mtime, DBusStat::nlink, NULL, DBusStat::size, TRUE, and DBusStat::uid.

Referenced by _dbus_is_console_user().

◆ _dbus_strerror_from_errno()

DBUS_PRIVATE_EXPORT const char * _dbus_strerror_from_errno ( void )

Get error message from errno.

Returns: _dbus_strerror(errno)

Definition at line 758 of file dbus-sysdeps.c.

Referenced by _dbus_close_socket(), _dbus_create_directory(), _dbus_delete_file(), _dbus_ensure_directory(), _dbus_send_credentials_socket(), _dbus_set_socket_nonblocking(), _dbus_socketpair(), _dbus_write_socket(), and _dbus_write_socket_two().

◆ _dbus_string_get_dirname()

dbus_bool_t _dbus_string_get_dirname	(	const DBusString *	filename,
		DBusString *	dirname
	)

Get the directory name from a complete filename.

Parameters

filename	the filename
dirname	string to append directory name to

Returns: FALSE if no memory

Definition at line 1064 of file dbus-sysdeps-util-unix.c.

References _dbus_assert, _dbus_string_append(), _dbus_string_copy_len(), _dbus_string_find_byte_backward(), and NULL.

◆ _dbus_threads_init_platform_specific()

dbus_bool_t _dbus_threads_init_platform_specific ( void )

Initialize threads as in dbus_threads_init_default(), appropriately for the platform.

Returns: FALSE if no memory

Definition at line 279 of file dbus-sysdeps-pthread.c.

References _dbus_check_setuid(), FALSE, and TRUE.

Referenced by dbus_threads_init().

◆ _dbus_threads_lock_platform_specific()

void _dbus_threads_lock_platform_specific ( void )

Lock a static mutex used to protect _dbus_threads_init_platform_specific().

Definition at line 294 of file dbus-sysdeps-pthread.c.

References _dbus_assert.

Referenced by dbus_threads_init().

◆ _dbus_threads_unlock_platform_specific()

void _dbus_threads_unlock_platform_specific ( void )

Undo _dbus_threads_lock_platform_specific().

Definition at line 300 of file dbus-sysdeps-pthread.c.

References _dbus_assert.

Referenced by dbus_threads_init().

◆ _dbus_unix_groups_from_uid()

dbus_bool_t _dbus_unix_groups_from_uid	(	dbus_uid_t	uid,
		dbus_gid_t **	group_ids,
		int *	n_group_ids,
		DBusError *	error
	)

Gets all groups corresponding to the given UNIX user ID.

On UNIX, just calls _dbus_groups_from_uid(). On Windows, should always fail since we don't know any UNIX groups.

Parameters

uid	the UID
group_ids	return location for array of group IDs
n_group_ids	return location for length of returned array
error	error location

Returns: TRUE if the UID existed and we got some credentials

Definition at line 999 of file dbus-sysdeps-util-unix.c.

References _dbus_groups_from_uid().

◆ _dbus_unix_user_is_at_console()

dbus_bool_t _dbus_unix_user_is_at_console	(	dbus_uid_t	uid,
		DBusError *	error
	)

Checks to see if the UNIX user ID is at the console.

Should always fail on Windows (set the error to DBUS_ERROR_NOT_SUPPORTED).

Parameters

uid	UID of person to check
error	return location for errors

Returns: TRUE if the UID is the same as the console user and there are no errors

Definition at line 1017 of file dbus-sysdeps-util-unix.c.

References _dbus_is_console_user().

◆ _dbus_unix_user_is_process_owner()

dbus_bool_t _dbus_unix_user_is_process_owner ( dbus_uid_t uid )

Checks to see if the UNIX user ID matches the UID of the process.

Should always return FALSE on Windows.

Parameters

uid	the UNIX user ID

Returns: TRUE if this uid owns the process.

Definition at line 1032 of file dbus-sysdeps-util-unix.c.

References _dbus_geteuid(), and FALSE.

◆ _dbus_user_at_console()

dbus_bool_t _dbus_user_at_console	(	const char *	username,
		DBusError *	error
	)

Checks if user is at the console.

Parameters

username	user to check
error	return location for errors

Returns: TRUE is the user is at the consolei and there are no errors

Definition at line 575 of file dbus-sysdeps-util-unix.c.

References _dbus_concat_dir_and_file(), _dbus_file_exists(), _dbus_string_append(), _dbus_string_free(), _dbus_string_init(), _dbus_string_init_const(), and FALSE.

Referenced by _dbus_is_console_user().

◆ _dbus_verify_daemon_user()

dbus_bool_t _dbus_verify_daemon_user ( const char * user )

Verify that after the fork we can successfully change to this user.

Parameters

user	the username given in the daemon configuration

Returns: TRUE if username is valid

Definition at line 312 of file dbus-sysdeps-util-unix.c.

References _dbus_get_user_id_and_primary_group(), _dbus_string_init_const(), NULL, and TRUE.

◆ _dbus_windows_user_is_process_owner()

dbus_bool_t _dbus_windows_user_is_process_owner ( const char * windows_sid )

Checks to see if the Windows user SID matches the owner of the process.

Should always return FALSE on UNIX.

Parameters

windows_sid the Windows user SID

Returns: TRUE if this user owns the process.

Definition at line 1045 of file dbus-sysdeps-util-unix.c.

References FALSE, and TRUE.

◆ _dbus_write_pid_to_file_and_pipe()

dbus_bool_t _dbus_write_pid_to_file_and_pipe	(	const DBusString *	pidfile,
		DBusPipe *	print_pid_pipe,
		dbus_pid_t	pid_to_write,
		DBusError *	error
	)

Writes the given pid_to_write to a pidfile (if non-NULL) and/or to a pipe (if non-NULL).

Does nothing if pidfile and print_pid_pipe are both NULL.

Parameters

pidfile	the file to write to or NULL
print_pid_pipe	the pipe to write to or NULL
pid_to_write	the pid to write out
error	error on failure

Returns: FALSE if error is set

Definition at line 238 of file dbus-sysdeps-util-unix.c.

◆ _dbus_write_socket()

DBUS_PRIVATE_EXPORT int _dbus_write_socket	(	DBusSocket	fd,
		const DBusString *	buffer,
		int	start,
		int	len
	)

Like _dbus_write(), but only supports sockets and is thus available on Windows.

Parameters

fd	the file descriptor to write
buffer	the buffer to write data from
start	the first byte in the buffer to write
len	the number of bytes to try to write

Returns: the number of bytes written or -1 on error

Like _dbus_write(), but only supports sockets and is thus available on Windows.

Parameters

fd	the file descriptor to write
buffer	the buffer to write data from
start	the first byte in the buffer to write
len	the number of bytes to try to write

Returns: the number of bytes written or -1 on error

Definition at line 320 of file dbus-sysdeps-unix.c.

References _dbus_strerror_from_errno(), _dbus_verbose_bytes_of_string(), and _dbus_write().

Referenced by _dbus_send_credentials_socket().

◆ _dbus_write_socket_two()

int _dbus_write_socket_two	(	DBusSocket	fd,
		const DBusString *	buffer1,
		int	start1,
		int	len1,
		const DBusString *	buffer2,
		int	start2,
		int	len2
	)

Like _dbus_write_two() but only works on sockets and is thus available on Windows.

Parameters

fd	the file descriptor
buffer1	first buffer
start1	first byte to write in first buffer
len1	number of bytes to write from first buffer
buffer2	second buffer, or NULL
start2	first byte to write in second buffer
len2	number of bytes to write in second buffer

Returns: total bytes written from both buffers, or -1 on error

Like _dbus_write_two() but only works on sockets and is thus available on Windows.

The return value is the number of bytes written in the first buffer, plus the number written in the second. If the first buffer is written successfully and an error occurs writing the second, the number of bytes in the first is returned (i.e. the error is ignored), on systems that don't have writev. Handles EINTR for you. The second buffer may be NULL.

Parameters

fd	the file descriptor
buffer1	first buffer
start1	first byte to write in first buffer
len1	number of bytes to write from first buffer
buffer2	second buffer, or NULL
start2	first byte to write in second buffer
len2	number of bytes to write in second buffer

Returns: total bytes written from both buffers, or -1 on error

Definition at line 658 of file dbus-sysdeps-unix.c.

References _dbus_assert, _dbus_strerror_from_errno(), _dbus_write_two(), _DBUS_ZERO, and NULL.

◆ _dbus_write_socket_with_unix_fds()

DBUS_PRIVATE_EXPORT int _dbus_write_socket_with_unix_fds	(	DBusSocket	fd,
		const DBusString *	buffer,
		int	start,
		int	len,
		const int *	fds,
		int	n_fds
	)

Definition at line 545 of file dbus-sysdeps-unix.c.

◆ _dbus_write_socket_with_unix_fds_two()

int _dbus_write_socket_with_unix_fds_two	(	DBusSocket	fd,
		const DBusString *	buffer1,
		int	start1,
		int	len1,
		const DBusString *	buffer2,
		int	start2,
		int	len2,
		const int *	fds,
		int	n_fds
	)

Definition at line 566 of file dbus-sysdeps-unix.c.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ _DBUS_BYTE_OF_PRIMITIVE

◆ _DBUS_DOUBLES_BITWISE_EQUAL

◆ _DBUS_POLLERR

◆ _DBUS_POLLHUP

◆ _DBUS_POLLIN

◆ _DBUS_POLLNVAL

◆ _DBUS_POLLOUT

◆ _DBUS_POLLPRI

◆ DBUS_DEFAULT_MESSAGE_UNIX_FDS

◆ DBUS_GID_FORMAT

◆ DBUS_GID_UNSET

◆ DBUS_PID_FORMAT

◆ DBUS_PID_UNSET

◆ DBUS_POLLABLE_FORMAT

◆ DBUS_SOCKET_FORMAT

◆ DBUS_SOCKET_INIT

◆ DBUS_UID_FORMAT

◆ DBUS_UID_UNSET

Typedef Documentation

◆ dbus_gid_t

◆ dbus_pid_t

◆ dbus_uid_t

◆ DBusAtomic

◆ DBusDirIter

◆ DBusGUID

◆ DBusPollable

◆ DBusRLimit

Enumeration Type Documentation

◆ DBusCredentialsAddFlags

◆ DBusLogFlags

◆ DBusSystemLogSeverity

Function Documentation

◆ _dbus_abort()

◆ _dbus_accept()

◆ _dbus_append_keyring_directory_for_credentials()

◆ _dbus_append_user_from_current_process()

◆ _dbus_atomic_dec()

◆ _dbus_atomic_get()

◆ _dbus_atomic_inc()

◆ _dbus_atomic_set_nonzero()

◆ _dbus_atomic_set_zero()

◆ _dbus_become_daemon()

◆ _dbus_change_to_daemon_user()

◆ _dbus_check_dir_is_private_to_user()

◆ _dbus_check_setuid()

◆ _dbus_clearenv()

◆ _dbus_close_socket()

◆ _dbus_combine_tcp_errors()

◆ _dbus_command_for_pid()

◆ _dbus_concat_dir_and_file()

◆ _dbus_connect_tcp_socket()

◆ _dbus_connect_tcp_socket_with_nonce()

◆ _dbus_create_directory()

◆ _dbus_credentials_add_from_current_process()

◆ _dbus_credentials_add_from_user()

◆ _dbus_daemon_report_ready()

◆ _dbus_daemon_report_reloaded()

◆ _dbus_daemon_report_reloading()

◆ _dbus_daemon_report_stopping()

◆ _dbus_daemon_unpublish_session_bus_address()

◆ _dbus_delete_directory()

◆ _dbus_directory_close()

◆ _dbus_directory_get_next_file()

◆ _dbus_directory_open()

◆ _dbus_disable_sigpipe()

◆ _dbus_ensure_directory()

◆ _dbus_error_from_errno()

◆ _dbus_error_from_system_errno()

◆ _dbus_exit()

◆ _dbus_flush_caches()

◆ _dbus_generate_random_ascii()

◆ _dbus_generate_random_bytes()

◆ _dbus_generate_random_bytes_buffer()