IBM Storage Driver for OpenStack

IBM Storage Driver for OpenStack

Introduction

The IBM Storage Driver for OpenStack is a software component of the OpenStack cloud environment that enables utilization of storage resources provided by supported IBM storage systems.

The driver was validated on storage systems, as detailed in the Supported storage systems section below.

After the driver is configured on the OpenStack Cinder nodes, storage volumes can be allocated by the Cinder nodes to the Nova nodes. Virtual machines on the Nova nodes can then utilize these storage resources.

Concept diagram

This figure illustrates how an IBM storage system is connected to the OpenStack cloud environment and provides storage resources when the IBM Storage Driver for OpenStack is configured on the OpenStack Cinder nodes. The OpenStack cloud is connected to the IBM storage system over Fibre Channel. Remote cloud users can issue requests for storage resources from the OpenStack cloud. These requests are transparently handled by the IBM Storage Driver, which communicates with the IBM storage system and controls the storage volumes on it. The IBM storage resources are then provided to the Nova nodes in the OpenStack cloud.

../../../_images/ibm-storage-nova-concept.png

Compatibility and requirements

This section specifies the compatibility and requirements of the IBM Storage Driver for OpenStack.

Supported storage systems

The IBM Storage Driver for OpenStack supports the IBM storage systems, as detailed in the following table.

Storage system

Microcode version

Connectivity

IBM DS8870

7.5 SP4 or later, 7.5 with RESTful API patch

Fibre Channel (FC)

IBM DS8880

8.1 or later

Fibre Channel (FC)

Copy Services license

Copy Services features help you implement storage solutions to keep your business running 24 hours a day, 7 days a week by providing image caching, replication and cloning functions. The Copy Services license is based on usable capacity of the volumes involved in Copy Services functionality.

The Copy Services license is available for the following license scopes: FB and ALL (both FB and CKD).

The Copy Services license includes the following features:

  • Global Mirror

  • Metro Mirror

  • Metro/Global Mirror

  • Point-in-Time Copy/FlashCopy®

  • z/OS® Global Mirror

  • z/OS Metro/Global Mirror Incremental Resync (RMZ)

The Copy Services license feature codes are ordered in increments up to a specific capacity. For example, if you require 160 TB of capacity, order 10 of feature code 8251 (10 TB each up to 100 TB capacity), and 4 of feature code 8252 (15 TB each, for an extra 60 TB).

The Copy Services license includes the following feature codes.

Feature Code

Feature code for licensed function indicator

8250

CS - inactive

8251

CS - 10 TB (up to 100 TB capacity)

8252

CS - 15 TB (from 100.1 TB to 250 TB capacity)

8253

CS - 25 TB (from 250.1 TB to 500 TB capacity)

8254

CS - 75 TB (from 500.1 to 1250 TB capacity)

8255

CS - 175 TB (from 1250.1 TB to 3000 TB capacity)

8256

CS - 300 TB (from 3000.1 TB to 6000 TB capacity)

8260

CS - 500 TB (from 6000.1 TB to 10,000 TB capacity)

The following ordering rules apply when you order the Copy Services license:

  • The Copy Services license should be ordered based on the total usable capacity of all volumes involved in one or more Copy Services relationships.

  • The licensed authorization must be equal to or less that the total usable capacity allocated to the volumes that participate in Copy Services operations.

  • You must purchase features for both the source (primary) and target (secondary) storage system.

Required software on the OpenStack Cinder and Nova nodes

The IBM Storage Driver makes use of the following software on the OpenStack Cinder and Nova-compute nodes.

Software

Installed on

Ubuntu Server (16.04), x64

Red Hat Enterprise Linux (RHEL) 7.x, x64

CentOS Linux 7.x, x64

KVM for IBM z Systems

All OpenStack Cinder nodes

IBM Storage Host Attachment Kit for Linux

All OpenStack Cinder and Nova compute nodes that connect to storage systems and use RHEL 7.x or CentOS Linux 7.x

Linux patch package

All OpenStack Cinder nodes

sysfsutils utility

All OpenStack Cinder nodes on FC network

Configuration

Configure the driver manually by changing the cinder.conf file as follows:

volume_driver = cinder.volume.drivers.ibm.ibm_storage.IBMStorageDriver

Configuration Description for DS8000

Description of IBM Storage driver configuration options

Configuration option = Default value

Description

[DEFAULT]

ds8k_devadd_unitadd_mapping =

(String) Mapping between IODevice address and unit address.

ds8k_host_type = auto

(String) Set to zLinux if your OpenStack version is prior to Liberty and you’re connecting to zLinux systems. Otherwise set to auto. Valid values for this parameter are: ‘auto’, ‘AMDLinuxRHEL’, ‘AMDLinuxSuse’, ‘AppleOSX’, ‘Fujitsu’, ‘Hp’, ‘HpTru64’, ‘HpVms’, ‘LinuxDT’, ‘LinuxRF’, ‘LinuxRHEL’, ‘LinuxSuse’, ‘Novell’, ‘SGI’, ‘SVC’, ‘SanFsAIX’, ‘SanFsLinux’, ‘Sun’, ‘VMWare’, ‘Win2000’, ‘Win2003’, ‘Win2008’, ‘Win2012’, ‘iLinux’, ‘nSeries’, ‘pLinux’, ‘pSeries’, ‘pSeriesPowerswap’, ‘zLinux’, ‘iSeries’.

ds8k_ssid_prefix = FF

(String) Set the first two digits of SSID

proxy = cinder.volume.drivers.ibm.ibm_storage.proxy.IBMStorageProxy

(String) Proxy driver that connects to the IBM Storage Array

san_clustername =

(String) Cluster name to use for creating volumes

san_ip =

(String) IP address of SAN controller

san_login = admin

(String) Username for SAN controller

san_password =

(String) Password for SAN controller

Replication parameters

Parameter

Description

Applicable to

replication _device

Volume replication parameters

DS8000

backend_id

IP address or host name of the target storage system

DS8000

san_login

User name to be used during replication procedure

DS8000

san_password

Password to be used during replication procedure (base64-encoded)

DS8000

san_clustername

Pool name on the target storage system

DS8000

port_pairs

ID pairs of IO ports, participating in replication

DS8000

lss_range_for _cg

LSS range to reserve for consistency groups

DS8000

Security

The following information provides an overview of security for the IBM Storage Driver for OpenStack.

Configuring Cinder nodes for trusted communication

The IBM Storage Driver for OpenStack communicates with DS8000 over HTTPS, using self-signed certificate or certificate signed by a certificate authority (CA). Configure a trusted communication link to ensure a successful attachment of a Cinder node to a DS8000 storage system, as detailed in the following sections.

Adding a public certificate to trusted CA certificate store

Add the CA public certificate to the trusted CA certificates store on the Cinder node, according to procedures for the operating system in use.

  1. For RHEL 7.x or CentOS 7.x, place the certificate to be trusted (in PEM format) into the /etc/pki/ca-trust/source/anchors/ directory. Then, run the sudo update-ca-trust command.

  2. For Ubuntu 18.04, place the certificate to be trusted (in PEM format) into the /usr/local/share/ca-certificates/ directory. Rename the file, using the *.crt extension. Then, run the sudo update-ca-certificates command.

  3. For Python requests library with certifi, run the cat ca_public_certificate.pem command to append the certificate to the location of the certifi trust store file. For example:

    cat ca_public_certificate.pem >> /usr/local/lib/python3.6/
    dist-packages/certifi/cacert.pem.
    

Troubleshooting

Refer to this information to troubleshoot technical problems that you might encounter when using the IBM Storage Driver for OpenStack.

Checking the Cinder log files

The Cinder log files record operation information that might be useful for troubleshooting.

To achieve optimal and clear logging of events, activate the verbose logging level in the cinder.conf file, located in the /etc/cinder folder. Add the following line in the file, save the file, and then restart the cinder-volume service:

verbose = True
debug = True

To turn off the verbose logging level, change True to False, save the file, and then restart the cinder-volume service.

Check the log files on a periodic basis to ensure that the IBM Storage Driver is functioning properly. To check the log file on a Cinder node, go to the /var/log/cinder folder and open the activity log file named cinder-volume.log or volume.log.

Best practices

This section contains the general guidance and best practices.

Configuring volume replication (DS8000 Family)

Volume replication is required for disaster recovery and high-availability applications running on top of OpenStack-based clouds. The IBM Storage Driver for OpenStack supports synchronous (Metro Mirror) volume replication for DS8000 storage systems.

  1. Verify that:

    • Master and remote storage pools exist on DS8000 systems.

    • Reliable communication link is established between the primary and secondary sites, including physical connection and PPRC path.

    • Metro Mirror replication is enabled on DS8000 storage systems.

  2. Perform the following procedure, replacing the values in the example with your own:

    enabled_backends = ibm_ds8k_1, ibm_ds8k_2
    [ibm_ds8k_1]
    proxy = cinder.volume.drivers.ds8k_proxy.DS8KProxy
    volume_backend_name = ibm_ds8k_1
    san_clustername = P2,P3
    san_password = actual_password
    san_login = actual_username
    san_ip = host_fqdn
    volume_driver = cinder.volume.drivers.ibm.ibm_storage.IBMStorageDriver
    chap = disabled
    connection_type = fibre_channel
    replication_device = connection_type: fibre_channel,
    backend_id: bar, san_ip: host_fqdn,
    san_login: actual_username, san_password: actual_password,
    san_clustername: P4, port_pairs: I0236-I0306; I0237-I0307
    
    [ibm_ds8k_2]
    proxy = cinder.volume.drivers.ibm.ds8k_proxy.DS8KProxy
    volume_backend_name = ibm_ds8k_2
    san_clustername = P4,P5
    san_password = actual_password
    san_login = actual_username
    san_ip = 10.0.0.1
    volume_driver = cinder.volume.drivers.ibm.ibm_storage.IBMStorageDriver
    chap = disabled
    connection_type = fibre_channel
    

Configuring groups

The IBM Storage Driver for OpenStack supports volume grouping. These groups can be assigned a group type, and used for replication and group snapshotting.

Replication groups

For better control over replication granularity, the user can employ volume grouping. This enables volume group replication and failover without affecting the entire backend. The user can choose between a generic group replication and consistency group (CG) replication. For consistency group replication, the driver utilizes the storage capabilities to handle CGs and replicate them to a remote site. On the other hand, in generic group replication, the driver replicates each volume individually. In addition, the user can select the replication type.

To configure group replication:

  1. Create sync replicated consistency-group.

    • Create a volume type for replication.

    #cinder type-create rep-vol-1
    
    • Create a volume type for replication.

    #cinder type-key rep-vol-1
    set replication_type='<is> sync'
    replication_enabled='<is> True'
    
    • Create a group type.

    #cinder group-type-create rep-gr-1
    
    • Configure the group type.

    #cinder group-type-key rep-gr-1 set group_replication_enabled='<is> True' replication_type='<is> sync'
    
    • Create a replicated group, using existing group type and volume type.

    #cinder group-create rep-gr-1 rep-vol-1 --name replicated-gr-1
    
  2. Create a volume and add it to the group.

    • Create a replicated volume.

    #cinder create --name vol-1 --volume-type rep-vol-1 1
    
    • Add the volume to the group.

    #cinder group-update --add-volumes 91492ed9-c3cf-4732-a525-60e146510b90 replicated-gr-1
    

    Note

    You can also create the volume directly into the group by using the –group-id parameter, followed by ID of a group that the new volume belongs to. This function is supported by API version 3.13 and later.

  3. Enable replication.

    #cinder group-enable-replication replicated-gr-1
    
  4. Disable replication.

    #cinder group-disable-replication replicated-gr-1
    
  5. Fail over the replicated group.

    #cinder group-failover-replication replicated-gr-1
    

Consistency groups

Consistency groups are mostly the same as replication groups, but with additional support of group snapshots (consistent_group_snapshot_enabled parameter). See configuration example below.

#cinder group-type-create cg1
#cinder group-type-show cg1
#cinder group-type-key cg1 set consistent_group_snapshot_enabled="<is> True"
#cinder group-create --name cg1 IBM-DS8K_ibm.com_P0_P1_fibre_channel_not_thin,
IBM-DS8K_ibm.com_P0_P1_fibre_channel_thin,
IBM-DS8K_ibm.com_P0_P1_fibre_channel_not_thin_replica,
IBM-DS8K_ibm.com_P0_P1_fibre_channel_thin_replica

Using volume types for volume allocation control (DS8000 Family)

For better controls over volume placement granularity, you can use volume types. This enables volumes to be created on specific LSSes or pools. You can combine both types.

  • Storage pool

    #cinder type-key pool-1_2 set drivers:storage_pool_ids='P1,P2'
    
  • LSS

    #cinder type-key lss80_81 set drivers:storage_lss_ids='80,81'
    
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.