Configure and use driver filter and weighing for scheduler

Configure and use driver filter and weighing for scheduler

OpenStack Block Storage enables you to choose a volume back end based on back-end specific properties by using the DriverFilter and GoodnessWeigher for the scheduler. The driver filter and weigher scheduling can help ensure that the scheduler chooses the best back end based on requested volume properties as well as various back-end specific properties.

What is driver filter and weigher and when to use it

The driver filter and weigher gives you the ability to more finely control how the OpenStack Block Storage scheduler chooses the best back end to use when handling a volume request. One example scenario where using the driver filter and weigher can be if a back end that utilizes thin-provisioning is used. The default filters use the free capacity property to determine the best back end, but that is not always perfect. If a back end has the ability to provide a more accurate back-end specific value you can use that as part of the weighing. Another example of when the driver filter and weigher can prove useful is if a back end exists where there is a hard limit of 1000 volumes. The maximum volume size is 500 GB. Once 75% of the total space is occupied the performance of the back end degrades. The driver filter and weigher can provide a way for these limits to be checked for.

Enable driver filter and weighing

To enable the driver filter, set the scheduler_default_filters option in the cinder.conf file to DriverFilter. The DriverFilter can also be used along with other filters by adding it to the list if other filters are already present.

To enable the goodness filter as a weigher, set the scheduler_default_weighers option in the cinder.conf file to GoodnessWeigher or add it to the list if other weighers are already present.

You can choose to use the DriverFilter without the GoodnessWeigher or vice-versa. The filter and weigher working together, however, create the most benefits when helping the scheduler choose an ideal back end.

Important

The GoodnessWeigher can be used along with CapacityWeigher and others, but must be used with caution as it might obfuscate the CapacityWeigher.

Example cinder.conf configuration file:

scheduler_default_filters = DriverFilter
scheduler_default_weighers = GoodnessWeigher

Note

It is useful to use the other filters and weighers available in OpenStack in combination with these custom ones. For example, the CapacityFilter and CapacityWeigher can be combined with these. Using them together should be done with caution as depending on the defined logic, one might obfuscate the other.

Defining your own filter and goodness functions

You can define your own filter and goodness functions through the use of various properties that OpenStack Block Storage has exposed. Properties exposed include information about the volume request being made, volume_type settings, and back-end specific information about drivers. All of these allow for a lot of control over how the ideal back end for a volume request will be decided.

The filter_function option is a string defining an equation that will determine whether a back end should be considered as a potential candidate in the scheduler.

The goodness_function option is a string defining an equation that will rate the quality of the potential host (0 to 100, 0 lowest, 100 highest).

Important

The drive filter and weigher will use default values for filter and goodness functions for each back end if you do not define them yourself. If complete control is desired then a filter and goodness function should be defined for each of the back ends in the cinder.conf file.

Supported operations in filter and goodness functions

Below is a table of all the operations currently usable in custom filter and goodness functions created by you:

Operations

Type

+, -, *, /, ^

standard math

not, and, or, &, |, !

logic

>, >=, <, <=, ==, <>, !=

equality

+, -

sign

x ? a : b

ternary

abs(x), max(x, y), min(x, y)

math helper functions

Caution

Syntax errors you define in filter or goodness strings are thrown at a volume request time.

Available properties when creating custom functions

There are various properties that can be used in either the filter_function or the goodness_function strings. The properties allow access to volume info, qos settings, extra specs, and so on.

The following properties and their sub-properties are currently available for use:

Host stats for a back end

In order to access these properties, use the following format: stats.<property>

host

The host’s name

volume_backend_name

The volume back end name

vendor_name

The vendor name

driver_version

The driver version

storage_protocol

The storage protocol

QoS_support

Boolean signifying whether QoS is supported

total_capacity_gb

The total capacity in GB

allocated_capacity_gb

The allocated capacity in GB

free_capacity_gb

The free capacity in GB

reserved_percentage

The reserved storage percentage

Capabilities specific to a back end

These properties are determined by the specific back end you are creating filter and goodness functions for. Some back ends may not have any properties available here. Once the capabilities vary too much according to the backend, it is better to check its properties reported on the scheduler log. The scheduler reports these capabilities constantly. In order to access these properties, use the following format: capabilities.<property>

Requested volume properties

In order to access the volume properties, use the following format: volume.<property>

status

Status for the requested volume

volume_type_id

The volume type ID

display_name

The display name of the volume

volume_metadata

Any metadata the volume has

reservations

Any reservations the volume has

user_id

The volume’s user ID

attach_status

The attach status for the volume

display_description

The volume’s display description

id

The volume’s ID

replication_status

The volume’s replication status

snapshot_id

The volume’s snapshot ID

encryption_key_id

The volume’s encryption key ID

source_volid

The source volume ID

volume_admin_metadata

Any admin metadata for this volume

source_replicaid

The source replication ID

consistencygroup_id

The consistency group ID

size

The size of the volume in GB

metadata

General metadata

The property most used from here will most likely be the size sub-property.

Extra specs for the requested volume type

View the available properties for volume types by running:

$ cinder extra-specs-list

Current QoS specs for the requested volume type

View the available properties for volume types by running:

$ openstack volume qos list

In order to access these properties in a custom string use the following format:

<property>.<sub_property>

Driver filter and weigher usage examples

Below are examples for using the filter and weigher separately, together, and using driver-specific properties.

Example cinder.conf file configuration for customizing the filter function:

[default]
scheduler_default_filters = DriverFilter
enabled_backends = lvm-1, lvm-2

[lvm-1]
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = sample_LVM01
filter_function = "volume.size < 10"

[lvm-2]
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = sample_LVM02
filter_function = "volume.size >= 10"

The above example will filter volumes to different back ends depending on the size of the requested volume. Default OpenStack Block Storage scheduler weighing is done. Volumes with a size less than 10 GB are sent to lvm-1 and volumes with a size greater than or equal to 10 GB are sent to lvm-2.

Example cinder.conf file configuration for customizing the goodness function:

[default]
scheduler_default_weighers = GoodnessWeigher
enabled_backends = lvm-1, lvm-2

[lvm-1]
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = sample_LVM01
goodness_function = "(volume.size < 5) ? 100 : 50"

[lvm-2]
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = sample_LVM02
goodness_function = "(volume.size >= 5) ? 100 : 25"

The above example will determine the goodness rating of a back end based off of the requested volume’s size. Default OpenStack Block Storage scheduler filtering is done. The example shows how the ternary if statement can be used in a filter or goodness function. If a requested volume is of size 10 GB then lvm-1 is rated as 50 and lvm-2 is rated as 100. In this case lvm-2 wins. If a requested volume is of size 3 GB then lvm-1 is rated 100 and lvm-2 is rated 25. In this case lvm-1 would win.

Example cinder.conf file configuration for customizing both the filter and goodness functions:

[default]
scheduler_default_filters = DriverFilter
scheduler_default_weighers = GoodnessWeigher
enabled_backends = lvm-1, lvm-2

[lvm-1]
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = sample_LVM01
filter_function = "stats.total_capacity_gb < 500"
goodness_function = "(volume.size < 25) ? 100 : 50"

[lvm-2]
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = sample_LVM02
filter_function = "stats.total_capacity_gb >= 500"
goodness_function = "(volume.size >= 25) ? 100 : 75"

The above example combines the techniques from the first two examples. The best back end is now decided based off of the total capacity of the back end and the requested volume’s size.

Example cinder.conf file configuration for accessing driver specific properties:

[default]
scheduler_default_filters = DriverFilter
scheduler_default_weighers = GoodnessWeigher
enabled_backends = lvm-1,lvm-2,lvm-3

[lvm-1]
volume_group = stack-volumes-lvmdriver-1
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = lvmdriver-1
filter_function = "volume.size < 5"
goodness_function = "(capabilities.total_volumes < 3) ? 100 : 50"

[lvm-2]
volume_group = stack-volumes-lvmdriver-2
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_backend_name = lvmdriver-2
filter_function = "volume.size < 5"
goodness_function = "(capabilities.total_volumes < 8) ? 100 : 50"

[lvm-3]
volume_group = stack-volumes-lvmdriver-3
volume_driver = cinder.volume.drivers.LVMVolumeDriver
volume_backend_name = lvmdriver-3
goodness_function = "55"

The above is an example of how back-end specific properties can be used in the filter and goodness functions. In this example the LVM driver’s total_volumes capability is being used to determine which host gets used during a volume request. In the above example, lvm-1 and lvm-2 will handle volume requests for all volumes with a size less than 5 GB. Both lvm-1 and lvm-2 will have the same priority while lvm-1 contains 3 or less volumes. After that lvm-2 will have priority while it contains 8 or less volumes. The lvm-3 will collect all volumes greater or equal to 5 GB as well as all volumes once lvm-1 and lvm-2 lose priority.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.